-
Something wrong with this record ?
Numerical investigation of inspiratory airflow in a realistic model of the human tracheobronchial airways and a comparison with experimental results
J. Elcner, F. Lizal, J. Jedelsky, M. Jicha, M. Chovancova,
Language English Country Germany
Document type Comparative Study, Journal Article, Research Support, Non-U.S. Gov't
NLK
ProQuest Central
from 2002-06-01 to 1 year ago
Medline Complete (EBSCOhost)
from 2011-02-01 to 1 year ago
Health & Medicine (ProQuest)
from 2002-06-01 to 1 year ago
- MeSH
- Models, Biological * MeSH
- Biomechanical Phenomena MeSH
- Bronchi physiology MeSH
- Time Factors MeSH
- Respiration * MeSH
- Humans MeSH
- Numerical Analysis, Computer-Assisted * MeSH
- Pulmonary Ventilation physiology MeSH
- Trachea physiology MeSH
- Check Tag
- Humans MeSH
- Publication type
- Journal Article MeSH
- Research Support, Non-U.S. Gov't MeSH
- Comparative Study MeSH
In this article, the results of numerical simulations using computational fluid dynamics (CFD) and a comparison with experiments performed with phase Doppler anemometry are presented. The simulations and experiments were conducted in a realistic model of the human airways, which comprised the throat, trachea and tracheobronchial tree up to the fourth generation. A full inspiration/expiration breathing cycle was used with tidal volumes 0.5 and 1 L, which correspond to a sedentary regime and deep breath, respectively. The length of the entire breathing cycle was 4 s, with inspiration and expiration each lasting 2 s. As a boundary condition for the CFD simulations, experimentally obtained flow rate distribution in 10 terminal airways was used with zero pressure resistance at the throat inlet. CCM+ CFD code (Adapco) was used with an SST k-ω low-Reynolds Number RANS model. The total number of polyhedral control volumes was 2.6 million with a time step of 0.001 s. Comparisons were made at several points in eight cross sections selected according to experiments in the trachea and the left and right bronchi. The results agree well with experiments involving the oscillation (temporal relocation) of flow structures in the majority of the cross sections and individual local positions. Velocity field simulation in several cross sections shows a very unstable flow field, which originates in the tracheal laryngeal jet and propagates far downstream with the formation of separation zones in both left and right airways. The RANS simulation agrees with the experiments in almost all the cross sections and shows unstable local flow structures and a quantitatively acceptable solution for the time-averaged flow field.
References provided by Crossref.org
- 000
- 00000naa a2200000 a 4500
- 001
- bmc17001099
- 003
- CZ-PrNML
- 005
- 20170113114052.0
- 007
- ta
- 008
- 170103s2016 gw f 000 0|eng||
- 009
- AR
- 024 7_
- $a 10.1007/s10237-015-0701-1 $2 doi
- 024 7_
- $a 10.1007/s10237-015-0701-1 $2 doi
- 035 __
- $a (PubMed)26163996
- 040 __
- $a ABA008 $b cze $d ABA008 $e AACR2
- 041 0_
- $a eng
- 044 __
- $a gw
- 100 1_
- $a Elcner, Jakub $u Brno University of Technology, Technicka 2896/2, 61669, Brno, Czech Republic.
- 245 10
- $a Numerical investigation of inspiratory airflow in a realistic model of the human tracheobronchial airways and a comparison with experimental results / $c J. Elcner, F. Lizal, J. Jedelsky, M. Jicha, M. Chovancova,
- 520 9_
- $a In this article, the results of numerical simulations using computational fluid dynamics (CFD) and a comparison with experiments performed with phase Doppler anemometry are presented. The simulations and experiments were conducted in a realistic model of the human airways, which comprised the throat, trachea and tracheobronchial tree up to the fourth generation. A full inspiration/expiration breathing cycle was used with tidal volumes 0.5 and 1 L, which correspond to a sedentary regime and deep breath, respectively. The length of the entire breathing cycle was 4 s, with inspiration and expiration each lasting 2 s. As a boundary condition for the CFD simulations, experimentally obtained flow rate distribution in 10 terminal airways was used with zero pressure resistance at the throat inlet. CCM+ CFD code (Adapco) was used with an SST k-ω low-Reynolds Number RANS model. The total number of polyhedral control volumes was 2.6 million with a time step of 0.001 s. Comparisons were made at several points in eight cross sections selected according to experiments in the trachea and the left and right bronchi. The results agree well with experiments involving the oscillation (temporal relocation) of flow structures in the majority of the cross sections and individual local positions. Velocity field simulation in several cross sections shows a very unstable flow field, which originates in the tracheal laryngeal jet and propagates far downstream with the formation of separation zones in both left and right airways. The RANS simulation agrees with the experiments in almost all the cross sections and shows unstable local flow structures and a quantitatively acceptable solution for the time-averaged flow field.
- 650 _2
- $a biomechanika $7 D001696
- 650 _2
- $a bronchy $x fyziologie $7 D001980
- 650 _2
- $a lidé $7 D006801
- 650 12
- $a biologické modely $7 D008954
- 650 12
- $a numerická analýza pomocí počítače $7 D009716
- 650 _2
- $a plicní ventilace $x fyziologie $7 D012123
- 650 12
- $a dýchání $7 D012119
- 650 _2
- $a časové faktory $7 D013997
- 650 _2
- $a trachea $x fyziologie $7 D014132
- 655 _2
- $a srovnávací studie $7 D003160
- 655 _2
- $a časopisecké články $7 D016428
- 655 _2
- $a práce podpořená grantem $7 D013485
- 700 1_
- $a Lizal, Frantisek $u Brno University of Technology, Technicka 2896/2, 61669, Brno, Czech Republic.
- 700 1_
- $a Jedelsky, Jan $u Brno University of Technology, Technicka 2896/2, 61669, Brno, Czech Republic.
- 700 1_
- $a Jicha, Miroslav $u Brno University of Technology, Technicka 2896/2, 61669, Brno, Czech Republic. jicha@fme.vutbr.cz.
- 700 1_
- $a Chovancova, Michaela $u Brno University of Technology, Technicka 2896/2, 61669, Brno, Czech Republic.
- 773 0_
- $w MED00172900 $t Biomechanics and modeling in mechanobiology $x 1617-7940 $g Roč. 15, č. 2 (2016), s. 447-69
- 856 41
- $u https://pubmed.ncbi.nlm.nih.gov/26163996 $y Pubmed
- 910 __
- $a ABA008 $b sig $c sign $y a $z 0
- 990 __
- $a 20170103 $b ABA008
- 991 __
- $a 20170113114153 $b ABA008
- 999 __
- $a ok $b bmc $g 1180239 $s 961666
- BAS __
- $a 3
- BAS __
- $a PreBMC
- BMC __
- $a 2016 $b 15 $c 2 $d 447-69 $e 20150712 $i 1617-7940 $m Biomechanics and modeling in mechanobiology $n Biomech. model. mechanobiol,. $x MED00172900
- LZP __
- $a Pubmed-20170103