Microdosimetry for a carbon ion beam using track-etched detectors
Jazyk angličtina Země Velká Británie, Anglie Médium print-electronic
Typ dokumentu časopisecké články, práce podpořená grantem
PubMed
25862534
DOI
10.1093/rpd/ncv131
PII: ncv131
Knihovny.cz E-zdroje
- MeSH
- částice - urychlovače přístrojové vybavení MeSH
- dávka záření MeSH
- design vybavení MeSH
- elektrony MeSH
- kalibrace MeSH
- lineární přenos energie účinky záření MeSH
- mikrotechnologie metody MeSH
- počítačová simulace MeSH
- polymethylmethakrylát chemie MeSH
- radiometrie přístrojové vybavení MeSH
- těžké ionty * MeSH
- uhlík * MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
- Názvy látek
- polymethylmethakrylát MeSH
- uhlík * MeSH
Track-etched detectors (TED) have been used as linear energy transfer (LET) spectrometers in heavy ion beams for many years. LET spectra and depth-dose distribution of a carbon ion beam were measured behind polymethylmethacrylate degraders at Heavy Ion Medical Accelerator in Chiba, Japan. The measurements were performed along monoenergetic beam with energy 290 MeV u(-1) in different positions: (1) at beam extraction area, (2) at beginning, (3) maximum and (4) behind the Bragg peak region (0, 117, 147 and 151 mm of water-equivalent depth, respectively). The LET spectra inside and outside of the primary ion beam have been evaluated. TED record only heavy charged particles with LET above 8-10 keV µm(-1), while electrons and ions with lower LET are not detected. The Geant4 simulation toolkit version 4.9.6.P01 has been used to estimate the contribution of non-detected particles to absorbed dose. Presented results demonstrate the applicability of TED for microdosimetry measurements in therapeutic carbon ion beams.
Citace poskytuje Crossref.org