* Zobrazit nápovědu

6 záznamů v Medvik Filtry

Článek

Polymer scaffolds with no skin-effect for tissue engineering applications fabricated by thermally induced phase separation

Biomedical materials. 2016 ; 11 (1) : 015002. [pub] 20160111

Biomed Mater
ISSN 1748-605X
Medvik
Zdroj

Thermally induced phase separation (TIPS) based methods are widely used for the fabrication of porous scaffolds for tissue engineering and related applications. However, formation of a less-/non-porous layer at the scaffold's outer surface at the air-liquid interface, often known as the skin-effect, restricts the cell infiltration inside the scaffold and therefore limits its efficacy. To this end, we demonstrate a TIPS-based process involving the exposure of the just quenched poly(lactide-co-caprolactone):dioxane phases to the pure dioxane for a short time while still being under the quenching strength, herein after termed as the second quenching (2Q). Scanning electron microscopy, mercury intrusion porosimetry and contact angle analysis revealed a direct correlation between the time of 2Q and the gradual disappearance of the skin, followed by the widening of the outer pores and the formation of the fibrous filaments over the surface, with no effect on the internal pore architecture and the overall porosity of scaffolds. The experiments at various quenching temperatures and polymer concentrations revealed the versatility of 2Q in removing the skin. In addition, the in vitro cell culture studies with the human primary fibroblasts showed that the scaffolds prepared by the TIPS based 2Q process, with the optimal exposure time, resulted in a higher cell seeding and viability in contrast to the scaffolds prepared by the regular TIPS. Thus, TIPS including the 2Q step is a facile, versatile and innovative approach to fabricate the polymer scaffolds with a skin-free and fully open porous surface morphology for achieving a better cell response in tissue engineering and related applications.

Článek

Toward structured macroporous hydrogel composites: electron beam-initiated polymerization of layered cryogels

Biomacromolecules. 2015 ; 16 (4) : 1146-56. [pub] 20150310

ISSN 1526-4602
Medvik
Zdroj

The ability to tailor mechanical properties and architecture is crucial in creating macroporous hydrogel scaffolds for tissue engineering. In the present work, a technique for the modification of the pore size and stiffness of acrylamide-based cryogels is demonstrated via the regulation of an electron beam irradiation dose. The samples were characterized by equilibrium swelling measurements, light and scanning electron microscopy, mercury porosimetry, Brunauer-Emmett-Teller surface area analysis, and stiffness measurements. Their properties were compared to cryogels prepared by a standard redox-initiated radical polymerization. A (125)I radiolabeled azidopentanoyl-GGGRGDSGGGY-NH2 peptide was bound to the surface to determine the concentration of the adhesive sites available for biomimetic modification. The functionality of the prepared substrates was evaluated by in vitro cultivation of adipose-derived stem cells. Moreover, the feasibility of preparing layered cryogels was demonstrated. This may be the key to the future preparation of complex hydrogel-based scaffolds to mimic the extracellular microenvironment in a wide range of applications.

MeSH
elektrony MeSH
kryogely chemická syntéza farmakologie MeSH
lidé MeSH
polymerizace * MeSH
poréznost * MeSH
tukové buňky účinky léků MeSH
Check Tag
lidé MeSH
Publikační typ
časopisecké články MeSH
práce podpořená grantem MeSH

E-kniha

Básně z jazzové dásně

Koubková, Jana
Autor Koubková, Jana

Praha : Galén, 2014

1. elektronické vydání 1 online zdroj (192 stran)

Básně z jazzové dásně nejsou jen básně, ale i texty, postřehy všeho druhu včetně citátů, které J. K. oslovují a inspirují. Je tu leccos k pobavení, zamyšlení aneb co se honí hlavou J. K. Četné fotografie dokumentují život J. K. v různých podobách. S ilustrátorem a grafikem Luďkem Bártou si padli do oka a takhle to dopadlo. Prosím buďte zvědaví - přeje Jana Koubková.

Článek online

Magnetic poly(glycidyl methacrylate) microspheres for protein capture

New biotechnology. 2014 ; 31 (5) : 482-91.

N Biotechnol
ISSN 1876-4347
Medvik
Zdroj

The efficient isolation and concentration of protein antigens from complex biological samples is a critical step in several analytical methods, such as mass spectrometry, flow cytometry and immunochemistry. These techniques take advantage of magnetic microspheres as immunosorbents. The focus of this study was on the development of new superparamagnetic polymer microspheres for the specific isolation of the tumor suppressor protein p53. Monodisperse macroporous poly(glycidyl methacrylate) (PGMA) microspheres measuring approximately 5 μm and containing carboxyl groups were prepared by multistep swelling polymerization of glycidyl methacrylate (GMA), 2-[(methoxycarbonyl)methoxy]ethyl methacrylate (MCMEMA) and ethylene dimethylacrylate (EDMA) as a crosslinker in the presence of cyclohexyl acetate as a porogen. To render the microspheres magnetic, iron oxide was precipitated within their pores; the Fe content in the particles received ∼18 wt%. Nonspecific interactions between the magnetic particles and biological media were minimized by coating the microspheres with poly(ethylene glycol) (PEG) terminated by carboxyl groups. The carboxyl groups of the magnetic PGMA microspheres were conjugated with primary amino groups of mouse monoclonal DO-1 antibody using conventional carbodiimide chemistry. The efficiency of protein p53 capture and the degree of nonspecific adsorption on neat and PEG-coated magnetic microspheres were determined by western blot analysis.