The use of nanoparticles as a delivery system for a specific antigen could solve many limitations of mucosal vaccine applications, such as low immunogenicity, or antigen protection and stabilization. In this study, we tested the ability of nasally administered chitosan nanoparticles loaded with glycoprotein B of murine cytomegalovirus to induce an immune response in an animal model. The choice of chitosan nanoparticle type was made by in vitro evaluation of sorption efficiency and antigen release. Three types of chitosan nanoparticles were prepared: crosslinked with tripolyphosphate, coated with hyaluronic acid, and in complex with polycaprolactone. The hydrodynamic size of the nanoparticles by dynamic light scattering, zeta potential, Fourier transform infrared spectroscopy, scanning electron microscopy, stability, loading efficiency, and release kinetics with ovalbumin were evaluated. Balb/c mice were immunized intranasally using the three-dose protocol with nanoparticles, gB, and adjuvants Poly(I:C) and CpG ODN. Subsequently, the humoral and cell-mediated antigen-specific immune response was determined. On the basis of the properties of the tested nanoparticles, the cross-linked nanoparticles were considered optimal for further investigation. The results show that nanoparticles with Poly(I:C) and with gB alone raised IgG antibody levels above the negative control. In the case of mucosal IgA, only gB alone weakly induced the production of IgA antibodies compared to saline-immunized mice. The number of activated cells increased slightly in mice immunized with nanoparticles and gB compared to those immunized with gB alone or to negative control. The results demonstrated that chitosan nanoparticles could have potential in the development of mucosal vaccines.
- MeSH
- adjuvancia imunologická MeSH
- aplikace intranazální MeSH
- chitosan * chemie MeSH
- glykoproteiny MeSH
- imunizace MeSH
- imunoglobulin A MeSH
- Muromegalovirus * MeSH
- myši inbrední BALB C MeSH
- myši MeSH
- nanočástice * chemie MeSH
- slizniční imunita MeSH
- vakcíny * MeSH
- zvířata MeSH
- Check Tag
- myši MeSH
- zvířata MeSH
- Publikační typ
- časopisecké články MeSH
Using an active targeting approach of chemotherapeutics-loaded nanocarriers (NCs) with monoclonal antibodies is a potential strategy to improve the specificity of the delivery systems and reduce adverse reactions of chemotherapeutic drugs. Specific targeting of the human epidermal growth factor receptor-2 (HER-2), expressed excessively in HER-2-positive breast cancer cells, can be achieved by conjugating NCs with an anti-HER-2 monoclonal antibody. We constructed trastuzumab-conjugated chitosan iodoacetamide-coated NCs containing doxorubicin (Tras-Dox-CHI-IA-NCs) as a tumor-targeted drug delivery system, during the study. Chitosan-iodoacetamide (CHI-IA) was synthesized and utilized to prepare trastuzumab-conjugated NCs (Tras-NCs). The morphology, physicochemical properties, drug loading, drug release, and biological activities of the NCs were elucidated. The Tras-NCs were spherical, with a particle size of approximately 76 nm, and had a positive zeta potential; after incorporating the drug, the size of the Tras-NC increased. A prolonged, 24-h drug release from the NCs was achieved. The Tras-NCs exhibited high cellular accumulation and significantly higher antitumor activity against HER-2-positive breast cancer cells than the unconjugated NCs and the drug solution. Therefore, Tras-Dox-CHI-IA-NCs could be a promising nanocarrier for HER-2-positive breast cancer.
- MeSH
- chitosan * chemie MeSH
- doxorubicin chemie MeSH
- jodacetamid MeSH
- lidé MeSH
- monoklonální protilátky chemie MeSH
- nádory prsu * farmakoterapie MeSH
- nanočástice * chemie MeSH
- nosiče léků chemie MeSH
- systémy cílené aplikace léků MeSH
- trastuzumab MeSH
- Check Tag
- lidé MeSH
- ženské pohlaví MeSH
- Publikační typ
- časopisecké články MeSH
The field of nanotechnology has the mysterious capacity to reform every subject it touches. Nanotechnology advancements have already altered a variety of scientific and industrial fields. Nanoparticles (NPs) with sizes ranging from 1 to 100 nm (nm) are of great scientific and commercial interest. Their functions and characteristics differ significantly from those of bulk metal. Commercial quantities of NPs are synthesized using chemical or physical methods. The use of the physical and chemical approaches remained popular for many years; however, the recognition of their hazardous effects on human well-being and conditions influenced serious world perspectives for the researchers. There is a growing need in this field for simple, non-toxic, clean, and environmentally safe nanoparticle production methods to reduce environmental impact and waste and increase energy productivity. Microbial nanotechnology is relatively a new field. Using various microorganisms, a wide range of nanoparticles with well-defined chemical composition, morphology, and size have been synthesized, and their applications in a wide range of cutting-edge technological areas have been investigated. Green synthesis of the nanoparticles is cost-efficient and requires low maintenance. The present review highlights the synthesis of the nanoparticles by different microbes, their characterization, and their biotechnological potential. It further deals with the applications in biomedical, food, and textile industries as well as its role in biosensing, waste recycling, and biofuel production.
Due to their unique properties, such as controlled drug release and improved bioavailability, polymeric microparticles and nanoparticles (MPs and NPs) have gained considerable interest in the pharmaceutical industry. Nevertheless, the high costs associated with biodegradable polymers and the active pharmaceutical ingredients (APIs) used for treating serious diseases, coupled with the vast number of API-polymer combinations, make the search for effective API-polymer MPs and NPs a costly and time-consuming process. In this work, the correlation between the compatibility of selected model APIs (i.e., ibuprofen, naproxen, paracetamol, and indomethacin) with poly(lactide-co-glycolide) (PLGA) derived from respective binary phase diagrams and characteristics of prepared MPs and NPs, such as the drug loading and solid-state properties, was investigated to probe the possibility of implementing the modeling of API-polymer thermodynamic and kinetic phase behavior as part of rational design of drug delivery systems based on MPs and NPs. API-PLGA-based MPs and NPs were formulated using an emulsion-solvent evaporation technique and were characterized for morphology, mean size, zeta potential, drug loading, and encapsulation efficiency. The solid-state properties of the encapsulated APIs were assessed using differential scanning calorimetry and X-ray powder diffraction. The evaluated compatibility was poor for all considered API-PLGA pairs, which is in alignment with the experimental results showing low drug loading in terms of amorphous API content. At the same time, drug loading of the studied APIs in terms of amorphous content was found to follow the same trend as their solubility in PLGA, indicating a clear correlation between API solubility in PLGA and achievable drug loading. These findings suggest that API-polymer phase behavior modeling and compatibility screening can be employed as an effective preformulation tool to estimate optimum initial API concentration for MP and NP preparation or, from a broader perspective, to tune or select polymeric carriers offering desired drug loading.
The present work reviews the liquid antisolvent crystallization (LASC) to prepare the nanoparticle of pharmaceutical compounds to enhance their solubility, dissolution rate, and bioavailability. The application of ultrasound and additives is discussed to prepare the particles with narrow size distribution. The use of ionic liquid as an alternative to conventional organic solvent is presented. Herbal compounds, also known for low aqueous solubility and limited clinical application, have been crystalized by LASC and discussed here. The particle characteristics such as particle size and particle size distribution are interpreted in terms of supersaturation, nucleation, and growth phenomena. To overcome the disadvantage of batch crystallization, the scientific literature on continuous flow reactors is also reviewed. LASC in a microfluidic device is emerging as a promising technique. The different design of the microfluidic device and their application in LASC are discussed. The combination of the LASC technique with traditional techniques such as high-pressure homogenization and spray drying is presented. A comparison of product characteristics prepared by LASC and the supercritical CO2 antisolvent method is discussed to show that LASC is an attractive and inexpensive alternative for nanoparticle preparation. One of the major strengths of this paper is a discussion on less-explored applications of LASC in pharmaceutical research to attract the attention of future researchers.
Hyaluronic acid (HA) coated irinotecan loaded lignin nanoparticles (HDLNPs) were synthesized using ionic interaction method. Optimized nanoparticles were characterized for their active chemotherapeutic targeting potential to CD44 receptors overly-expressed on cancer cells. Blood component interaction studies supported hemocompatible nature of HDLNPs and also demonstrated their sustained plasma residence property. Cell anti-proliferation and mitochondrial depolarization studies on HT-29 cells suggest significantly (p < 0.01) improved chemotherapeutic efficacy of HDLNPs. In vitro cell based studies showed that nanoparticles have retained antioxidant activity of lignin that can prevent cancer relapse. In vivo biodistribution studies in tumor-bearing Balb/c mice confirmed improved drug localization in tumor site for longer duration. Tumor regression and histopathological studies indicated the efficacy ofligand-assisted targeting chemotherapy over the conventional therapy. Hematological and biochemical estimation suggested that irinotecan-associated myelosuppression, liver steatosis and rare kidney failure can be avoided by its encapsulation in HA-coated lignin nanoparticles. HDLNPs were found to be stable over a period of 12 months.
- MeSH
- antigeny CD44 metabolismus MeSH
- antitumorózní látky * chemie MeSH
- irinotekan farmakologie MeSH
- kyselina hyaluronová chemie MeSH
- lignin MeSH
- myši MeSH
- nádorové buněčné linie MeSH
- nádory tračníku * farmakoterapie MeSH
- nanočástice * chemie MeSH
- tkáňová distribuce MeSH
- zvířata MeSH
- Check Tag
- myši MeSH
- zvířata MeSH
- Publikační typ
- časopisecké články MeSH
Hydrogel based matrices and titanium dioxide (TiO2) nanoparticles (NPs) are well established materials in bone tissue engineering. Nevertheless, there is still a challenge to design appropriate composites with enhanced mechanical properties and improved cell growth. Progressing in this direction, we synthesized nanocomposite hydrogels by impregnating TiO2 NPs in a chitosan and cellulose-based hydrogel matrix containing polyvinyl alcohol (PVA), to enhance the mechanical stability and swelling capacity. Although, TiO2 has been incorporated into single and double component matrix systems, it has rarely been combined with a tri-component hydrogel matrix system. The doping of NPs was confirmed by Fourier transform infrared spectroscopy, Raman spectroscopy, scanning electron microscopy and small- and wide-angle X-ray scattering. Our results showed that incorporation of TiO2 NPs improved the tensile properties of the hydrogels significantly. Furthermore, we performed biological evaluation of scaffolds, swelling degree, bioactivity assessment, and hemolytic tests to prove that all types of hydrogels were safe for use in the human body. The culturing of human osteoblast-like cells MG-63 on hydrogels showed better adhesion of cells in the presence of TiO2 and showed increasing proliferation with increasing amount of TiO2. Our results showed that the sample with the highest TiO2 concentration, CS/MC/PVA/TiO2 (1 %) had the best biological properties.
- MeSH
- celulosa farmakologie MeSH
- chitosan * farmakologie chemie MeSH
- hydrogely farmakologie chemie MeSH
- lidé MeSH
- nanočástice * chemie MeSH
- polyvinylalkohol chemie MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
Although several nanomedicines got clinical approval over the past two decades, the clinical translation rate is relatively small so far. There are many post-surveillance withdrawals of nanomedicines caused by various safety issues. For successful clinical advancement of nanotechnology, it is of unmet need to realize cellular and molecular foundation of nanotoxicity. Current data suggest that lysosomal dysfunction caused by nanoparticles is emerging as the most common intracellular trigger of nanotoxicity. This review analyzes prospect mechanisms of lysosomal dysfunction-mediated toxicity induced by nanoparticles. We summarized and critically assessed adverse drug reactions of current clinically approved nanomedicines. Importantly, we show that physicochemical properties have great impact on nanoparticles interaction with cells, excretion route and kinetics, and subsequently on toxicity. We analyzed literature on adverse reactions of current nanomedicines and hypothesized that adverse reactions might be linked with lysosomal dysfunction caused by nanomedicines. Finally, from our analysis it becomes clear that it is unjustifiable to generalize safety and toxicity of nanoparticles, since different particles possess distinct toxicological properties. We propose that the biological mechanism of the disease progression and treatment should be central in the optimization of nanoparticle design.
- MeSH
- lidé MeSH
- lyzozomy MeSH
- nanočástice * toxicita chemie MeSH
- nanomedicína * metody MeSH
- nanotechnologie metody MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
- přehledy MeSH
Some biologically active substances are unstable and poorly soluble in aqueous media, at the same time exhibiting low bioavailability. The incorporation of these biologically active compounds into the structure of a lipid-based lyotropic liquid crystalline phase or nanoparticles can increase or improve their stability and transport properties, subsequent bioavailability, and applicability in general. The aim of this short overview is (1) to clarify the principle of self-assembly of lipidic amphiphilic molecules in an aqueous environment and (2) to present lipidic bicontinuous cubic and hexagonal phases and their current biosensing (with a focus on electrochemical protocols) and biomedical applications.
- MeSH
- kapalné krystaly * chemie MeSH
- lipidy chemie MeSH
- nanočástice * chemie MeSH
- technologie MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
- přehledy MeSH
Nanočástice se řadí mezi moderní a rozvíjející se skupinu lékových forem s velkým potenciálem pro další budoucí využití. Do farmakoterapie přináší řadu výhod. Kombinace jejich velikosti, specifických vlastností pomocných látek a správně zvoleného léčiva může mít za výsledek cílenější terapii u některých vážných diagnóz. Se subcelulární velikostí lékové formy jsou ale spojeny i potencionální nežádoucí účinky, a ačkoliv výzkum probíhá s bezpočtem pomocných látek a typů nanočástic, do klinické praxe se ve skutečnosti prosadil jen jejich menší podíl. Tento stručný přehled pojednává právě o těchto v praxi používaných třídách nanočástic, přináší základní charakteristiku, rozdělení a případně klinické využití. Součástí článku je také aktuální přehled zástupců jednotlivých tříd nanočásticových lékových forem, které jsou v současnosti registrovány v ČR.
Nanoparticles belong to a modern and developing group of drug delivery systems with great potential for further future use. To pharmacotherapy, it brings a number of advantages. The combination of their size, specific properties of used excipients and a suitable drug can result in a more targeted therapy for some serious diagnoses. However, potential adverse effects are also associated with the subcellular size of the pharmaceutical form, and although research is being conducted with countless excipients and types of nanoparticles, only a small proportion of them have made it into clinical practice. This brief overview discusses these classes, it presents the basic characteristics, classification, and possible clinical use. The article also includes an up-to-date overview of representatives of individual nanoparticle drug delivery classes currently registered in the Czech Republic.