There is a growing interest in using deep eutectic solvents (DES) as a pharmaceutical delivery system for poorly water-soluble compounds. To reduce the risk of drug precipitation following oral administration, this study addresses the hypothesis that directly including a polymeric precipitation inhibitor (PI) in a DES mixture could obtain a polymer-embedded deep eutectic system (PEDES) as a novel bio-enabling formulation principle. Following broad formulation screening, a PEDES embedding 15% w/w of polyvinyl pyrrolidone K30 (PVP) in L-carnitine:ethylene glycol (1:4, molar ratio) DES was successfully formulated as a supersaturating formulation using indomethacin as model compound. The drug solubility of 175.6 mg/mL obtained in DES was remarkably high, and upon release (phosphate buffer, pH 6.5) a maximum supersaturation factor of 9.8 was recorded, whereby the release kinetics displayed a suitable "parachute effect". The formulation was further characterized to include a molecular dynamics simulation. It can be concluded that PEDES appears to be a viable novel formulation approach, setting solid grounds for further research to assess the full potential of this novel type of supersaturating drug delivery system.
The aim of this study was to investigate the molecular structures of tadalafil solid dispersions prepared by different techniques and further to relate them to surface free energy information indicating the final amorphousness of the product. Thus, we tried to complement the existing knowledge of solid dispersion formation. Poorly water-soluble tadalafil was combined with different polymers, i.e. Kollidon® 12 PF, Kollidon® VA 64 and Soluplus®, to form model systems. To assess the extent of drug-polymer miscibility, we studied model solid dispersion surface energy using inverse gas chromatography and phase micro-structure using confocal Raman microscopy. The selection of the preparation method was found to play a crucial role in the molecular arrangement of the incorporated drug and the polymer in resulting solid dispersion. Our results showed that a lower surface free energy indicated the formation of a more homogeneous solid dispersion. Conversely, a higher surface free energy corresponded to the heterogeneous systems containing tadalafil amorphous clusters that were captured by Raman mapping. Thus, we successfully introduced a novel evaluation approach of the drug molecular arrangement in solid dispersions that is especially useful for examining the miscibility of the components when the conventional characterizing techniques are inconclusive or yield variable results.
- MeSH
- chromatografie plynová MeSH
- polymery * chemie MeSH
- povidon * chemie MeSH
- rozpustnost MeSH
- tadalafil chemie MeSH
- Publikační typ
- časopisecké články MeSH
The use of noble metal nanoparticles in biomedical and biotechnological applications is nowadays well established. Particularly, silver nanoparticles (AgNPs) were proven to be effective for instance as a biocide agent. They also find applications in tumor therapies and sensing applications being encouraging tools for in-vivo imaging. In this framework, whenever they are in contact with living systems, they are rapidly coated by a protein corona thereby influencing a variety of biological events including cellular uptake, blood circulation lifetime, cytotoxicity and, ultimately, the therapeutic effect. Taking these considerations into account, we have explored the behavior of polymer-coated AgNPs in model protein environments focusing on the self-development of protein coronas. The polymers polyethyleneimine (PEI), polyvinylpyrrolidone (PVP) and poly(2-vinyl pyridine)-b-poly(ethylene oxide) (PEO-b-P2VP) were used as stabilizing agents. The chemical nature of the polymer capping remarkably influences the behavior of the hybrid nanomaterials in protein environments. The PEO-b-P2VP and PVP-stabilized AgNPs are essentially inert to the model proteins adsorption. On the other hand, the PEI-stabilized AgNPs interact strongly with bovine serum albumin (BSA). Nevertheless, the same silver colloids were evidenced to be stable in IgG and lysozyme environments. The BSA adsorption into the PEI-stabilized AgNPs is most probably driven by hydrogen bonding and van der Waals interactions as suggested by isothermal titration calorimetry data. The development of protein coronas around the AgNPs may have relevant implications in a variety of biological events. Therefore, further investigations are currently underway to evaluate the influence of its presence on the cytotoxicity, hemolytic effects and biocide properties of the produced hybrid nanomaterials.
- MeSH
- adsorpce MeSH
- dynamický rozptyl světla MeSH
- fluorescenční spektrometrie MeSH
- kalorimetrie MeSH
- koloidy chemie MeSH
- kur domácí MeSH
- nanočástice ultrastruktura MeSH
- polyethylenimin chemie MeSH
- polymery chemie MeSH
- povidon chemie MeSH
- proteinová korona chemie MeSH
- sérový albumin hovězí chemie MeSH
- skot MeSH
- spektrofotometrie ultrafialová MeSH
- stříbro chemie MeSH
- zvířata MeSH
- Check Tag
- skot MeSH
- zvířata MeSH
- Publikační typ
- časopisecké články MeSH
Tungsten oxide-based bulk and nanocrystalline materials are widely used as photocatalytic and photo- and electrochromic materials, as well as materials for biomedical applications. In our work, we focused our attention on the effect of sodium cations on the structure and photochromic properties of the WO3@PVP aqueous sols. To establish the effect, the sols were synthesized by either simple pH adjusting of sodium or ammonium tungstates' solutions, or using an ion exchange technique to remove the cations from the materials to the greatest possible extent. We showed that the presence of sodium cations in WO3@PVP favors the formation of reduced tungsten species (W+5) upon UV irradiation of the materials, strongly affecting their photochromic and photocatalytic properties. The pronounced photoreductive properties of WO3@PVP sols in photocatalytic reactions were demonstrated. Due to photoreductive properties, photochromic sols of tungsten oxide can act as effective photoprotectors in photooxidation processes. We believe that our work provides a considerable contribution to the elucidation of photochromic and redox phenomena in WO3-based materials.
- MeSH
- difrakce rentgenového záření MeSH
- fotochemické procesy MeSH
- katalýza MeSH
- kationty MeSH
- koncentrace vodíkových iontů MeSH
- maloúhlový rozptyl MeSH
- molekulární struktura MeSH
- nanočástice chemie MeSH
- oxidy chemie MeSH
- povidon chemie MeSH
- sodík chemie MeSH
- ultrafialové záření MeSH
- velikost částic MeSH
- wolfram chemie MeSH
- Publikační typ
- časopisecké články MeSH
This paper describes a potential environmental problem closely linked with the global production of water-soluble polymers such as polyvinyl alcohol (PVA) and polyvinylpyrrolidone (PVP). Both polymers make up the components of a multitude of products commonly utilized by industries and households. Hence, such a widespread use of PVA and PVP in the industrial sector and among consumers (the concentration of PVP in urban wastewater is approximately 7 mg/L) could pose a considerable problem, particularly to the environment. To this end, many publications have recently highlighted the poor biodegradability of PVA, in principle influenced by numerous biotic and abiotic factors. Facts published on the environmental fate of PVP have been scant, basically reporting that it is a biologically resistant polymer. As a result, the commercially produced water-soluble polymers of PVA and PVP are essentially non-biodegradable and possess the capacity to accumulate in virtually all environmental media. Consequently, there is a chance of heightened risk to the very environmental constituents in which PVA and PVP accumulate, depending on the routes of entry and transformation processes underway in such constituents of the ecosystem. This assumption is confirmed by the findings of initial research, which is worrying. Herein, PVA was detected in a soil environment, while a relatively high concentration of PVP was found in river water. A review of the literature was conducted to summarize the current state of knowledge concerning the fate of PVA and PVP in various environments, thereby also discerning potential solutions to tackle such dangers. This paper proposes methods to enhance the biodegradability of materials containing such materials; for PVA this means utilizing a suitable polysaccharide, whereas for PVP this pertains to actuating applications that induce substances to degrade. Accordingly, while it is understandable that this work cannot fully address all the issues associated with polymeric xenobiotics, it can still serve as a guide to discerning an economically viable solution, and provide a foundation for further research.
In many fish species, sperm cryopreservation has deleterious effects and leads to a significant decrease in spermatozoa viability. However, the effect of cryopreservation on sperm cells that survive this process and are still viable is not fully understood. The objective of this study was to compare the viability and proteomes of fresh and cryopreserved sterlet (Acipenser ruthenus) sperm samples before and after live-dead cell separation using Percoll density gradient centrifugation. Both fresh and cryopreserved sperm samples were divided into two groups (with or without application of Percoll separation). At each step of the experiment, sperm quality was evaluated by video microscopy combined with integrated computer-assisted sperm analysis software and flow cytometry for live-dead sperm viability analysis. Sperm motility and the percentage of live cells were reduced in the cryopreserved group compared to the fresh group from 89% to 33% for percentage of motility and from 96% to 70% for live cells. Straight line velocity and linearity of track were significantly lower in cryopreserved samples than in those separated by Percoll before and after cryopreservation. However, the percentages of motile and live spermatozoa were higher than 90% in samples subjected to Percoll separation. Proteomic analysis of spermatozoa by two-dimensional differences in-gel electrophoresis coupled with matrix-assisted laser-desorption/ionization time-of-flight/time-of-flight mass spectrometry revealed that 20 protein spot abundances underwent significant changes in cryopreserved samples compared to fresh ones. However, only one protein spot was significantly altered when samples before and after cryopreservation followed by Percoll separation were compared. Thus, the results of this study show that cryopreservation leads to minimal proteomic changes in the spermatozoa population, retaining high motility and viability parameters. The results also suggest that global differences in protein profiles between unselected fresh and cryopreserved samples are mainly due to protein loss or changes in the lethal and sublethal damaged cell subpopulations.
- MeSH
- centrifugace - gradient hustoty metody MeSH
- kryoprezervace metody MeSH
- motilita spermií fyziologie MeSH
- oxid křemičitý chemie MeSH
- povidon chemie MeSH
- proteomika MeSH
- ryby fyziologie MeSH
- spermie fyziologie MeSH
- uchování spermatu metody MeSH
- viabilita buněk fyziologie MeSH
- zvířata MeSH
- Check Tag
- mužské pohlaví MeSH
- zvířata MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
The aim of this study was to develop benzydamine hydrochloride-loaded orodispersible films using the modification of a solvent casting method. An innovative approach was developed when the drying process of a small-scale production was used based on a heated inert base for casting the film. During this process, two types of film-forming maltodextrins for rapid drug delivery were used. They were plasticized with two different polyols (xylitol and sorbitol). Superdisintegrant Kollidon® CL-F was tested as an excipient that can induce faster disintegration of the prepared films. The influence of the formulation parameters (dextrose equivalent of film-forming maltodextrins, a type of plasticizer, and the presence of superdisintegrant) on the disintegration time, mechanical properties, and moisture content of films was statistically evaluated using a multivariate data analysis. Orodispersible films containing maltodextrin with lower dextrose equivalent value showed better mechanical properties (tensile strength ranged from 886.6 ± 30.2 to 1484.2 ± 226.9 N cm-2), lower moisture content (0.5 ± 0.0 to 1.2 ± 0.2%), and shorter disintegration time (17.6 ± 2.9 to 27.8 ± 2.8 s). Films plasticized with xylitol showed shorter disintegration time (17.6 ± 2.9 to 29.2 ± 3.8 s) than films containing sorbitol (23.8 ± 2.9 to 31.7 ± 3.9 s). With the addition of superdisintegrant Kollidon® CL-F, a significant influence on disintegration time was not observed. The modified solvent casting method shows great promise in a small-scale laboratory production of orodispersible films, e.g., in a pharmacy lab.
Potential positive effects of flavonol quercetin on humans were suggested by many studies. However, it is not clear if these effects are mediated by quercetin or its metabolites. The in vivo confirmation of quercetin effects is largely hindered by its low water solubility and thus impossibility to test directly its impact. Therefore, a solid dispersion of quercetin with polyvinylpyrrolidone (PVP) was developed to prepare an injectable formulation of water-soluble quercetin. The optimized formulation provided a 20,000-fold increase in quercetin solubility. This formulation was tested on conventional and spontaneously hypertensive rats; it lowered their blood pressure in both short- and long-term basis. Pharmacokinetic data are also provided. This study reports for the first time an injectable water-soluble formulation of quercetin suitable for confirmation of its vascular effect in vivo.
- MeSH
- antihypertenziva chemie farmakologie terapeutické užití MeSH
- biologická dostupnost MeSH
- chemie farmaceutická MeSH
- hypertenze farmakoterapie MeSH
- injekce intravenózní MeSH
- krevní tlak účinky léků MeSH
- krysa rodu rattus MeSH
- lidé MeSH
- modely nemocí na zvířatech MeSH
- potkani inbrední SHR MeSH
- potkani Wistar MeSH
- povidon chemie MeSH
- příprava léků metody MeSH
- quercetin chemie farmakologie terapeutické užití MeSH
- rozpustnost MeSH
- velikost částic MeSH
- voda chemie MeSH
- zvířata MeSH
- Check Tag
- krysa rodu rattus MeSH
- lidé MeSH
- mužské pohlaví MeSH
- zvířata MeSH
- Publikační typ
- časopisecké články MeSH
Herein we describe a novel alternative synthesis route of polyvinylpyrrolidone nanoparticles using salting-out method at a temperature close to polyvinylpyrrolidone decomposition. At elevated temperatures, the stability of polyvinylpyrrolidone decreases and the opening of pyrrolidone ring fractions occurs. This leads to cross-linking process, where separate units of polyvinylpyrrolidone interact among themselves and rearrange to form nanoparticles. The formation/stability of these nanoparticles was confirmed by transmission electron microscopy, X-ray photoelectron spectroscopy, mass spectrometry, infrared spectroscopy, and spectrophotometry. The obtained nanoparticles possess exceptional biocompatibility. No toxicity and genotoxicity was found in normal human prostate epithelium cells (PNT1A) together with their high hemocompatibility. The antimicrobial effects of polyvinylpyrrolidone nanoparticles were tested on bacterial strains isolated from the wounds of patients suffering from hard-to-heal infections. Molecular analysis (qPCR) confirmed that the treatment can induce the regulation of stress-related survival genes. Our results strongly suggest that the polyvinylpyrrolidone nanoparticles have great potential to be developed into a novel antibacterial compound.
- MeSH
- antibakteriální látky chemie farmakologie MeSH
- biokompatibilní materiály chemie farmakologie MeSH
- buněčné linie MeSH
- difrakce rentgenového záření metody MeSH
- epitel účinky léků MeSH
- fotoelektronová spektroskopie metody MeSH
- lidé MeSH
- mikrobiální testy citlivosti metody MeSH
- nanočástice chemie MeSH
- povidon chemie MeSH
- prostata účinky léků MeSH
- spektroskopie infračervená s Fourierovou transformací metody MeSH
- stabilita léku MeSH
- transmisní elektronová mikroskopie metody MeSH
- Check Tag
- lidé MeSH
- mužské pohlaví MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
CONTEXT: The preparation of liquisolid systems (LSS) represents a promising method for enhancing a dissolution rate and bioavailability of poorly soluble drugs. The release of the drug from LSS tablets is affected by many factors, including the disintegration time. OBJECTIVE: The evaluation of differences among LSS containing varying amounts and types of commercially used superdisintegrants (Kollidon® CL-F, Vivasol® and Explotab®). MATERIALS AND METHODS: LSS were prepared by spraying rosuvastatin solution onto Neusilin® US2 and further processing into tablets. Varying amounts of superdisintegrants were used and the differences among LSS were evaluated. The multiple scatter plot method was used to visualize the relationships within the obtained data. RESULTS AND DISCUSSION: All disintegrants do not showed negative effect on the flow properties of powder blends. The type and concentration of superdisintegrant had an impact on the disintegration time and dissolution profiles of tablets. Tablets with Explotab® showed the longest disintegration time and the smallest amount of released drug. Fastest disintegration and dissolution rate were observed in tablets containing Kollidon® CL-F (≥2.5% w/w). Also tablets with Vivasol® (2.5-4.0% w/w) showed fast disintegration and complete drug release. CONCLUSION: Kollidon® CL-F and Vivasol® in concentration ≥2.5% are suitable superdisintegrants for LSS with enhanced release of drug.
- MeSH
- anticholesteremika aplikace a dávkování chemie MeSH
- farmaceutické pomocné látky chemie MeSH
- povidon chemie MeSH
- příprava léků MeSH
- rosuvastatin kalcium aplikace a dávkování chemie MeSH
- rozpustnost MeSH
- silikáty chemie MeSH
- škrob analogy a deriváty chemie MeSH
- sloučeniny hliníku chemie MeSH
- sloučeniny hořčíku chemie MeSH
- tablety chemie MeSH
- uvolňování léčiv MeSH
- Publikační typ
- časopisecké články MeSH
