Detail
Článek
Článek online
FT
Medvik - BMČ
  • Je něco špatně v tomto záznamu ?

Spectrometry of linear energy transfer with track-etched detectors in carbon ion beams, MONO and SOBP

K. Pachnerová Brabcová, I. Ambrožová, F. Spurný

. 2011 ; 143 (2-4) : 440-44.

Jazyk angličtina Země Anglie, Velká Británie

Typ dokumentu časopisecké články, práce podpořená grantem

Perzistentní odkaz   https://www.medvik.cz/link/bmc12027220

Five various materials employed as track-etched detectors (TEDs) were exposed in beams of carbon ions with energy 290 MeV. u(-1) in the HIMAC-BIO facility in Japan. The exposures were performed behind various types of polymethyl methacrylate shielding. The beam had two possible set-ups--monoenergetic set-up and modulated spread-out Bragg peak set-up. All used TEDs are polyallyl diglycol carbonates (PADCs): Page from Mouldings (Pershore) Ltd, Tastrak from Track Analysis Systems Ltd, both from the UK; USF4 from American Technical Plastics from the USA and two products of Japan Fukuvi Chemical Industry Co., Ltd--TD1 and Baryotrak. Spectra of linear energy transfer and depth-dose distributions were obtained. Besides, differences among PADCs are discussed.

Citace poskytuje Crossref.org

000      
00000naa a2200000 a 4500
001      
bmc12027220
003      
CZ-PrNML
005      
20160329164843.0
007      
ta
008      
120816s2011 enk f 000 0#eng||
009      
AR
024    7_
$a 10.1093/rpd/ncq471 $2 doi
035    __
$a (PubMed)21156782
040    __
$a ABA008 $b cze $d ABA008 $e AACR2
041    0_
$a eng
044    __
$a enk
100    1_
$a Pachnerová Brabcová, K. $u Department of Radiation Dosimetry, Nuclear Physics Institute, AS CR, Prague, Czech Republic. brabcova@ujf.cas.cz
245    10
$a Spectrometry of linear energy transfer with track-etched detectors in carbon ion beams, MONO and SOBP / $c K. Pachnerová Brabcová, I. Ambrožová, F. Spurný
520    9_
$a Five various materials employed as track-etched detectors (TEDs) were exposed in beams of carbon ions with energy 290 MeV. u(-1) in the HIMAC-BIO facility in Japan. The exposures were performed behind various types of polymethyl methacrylate shielding. The beam had two possible set-ups--monoenergetic set-up and modulated spread-out Bragg peak set-up. All used TEDs are polyallyl diglycol carbonates (PADCs): Page from Mouldings (Pershore) Ltd, Tastrak from Track Analysis Systems Ltd, both from the UK; USF4 from American Technical Plastics from the USA and two products of Japan Fukuvi Chemical Industry Co., Ltd--TD1 and Baryotrak. Spectra of linear energy transfer and depth-dose distributions were obtained. Besides, differences among PADCs are discussed.
650    _2
$a uhlík $7 D002244
650    _2
$a těžké ionty $7 D020450
650    _2
$a lineární přenos energie $7 D018499
650    _2
$a dávka záření $7 D011829
650    _2
$a spektrální analýza $x přístrojové vybavení $x metody $7 D013057
655    _2
$a časopisecké články $7 D016428
655    _2
$a práce podpořená grantem $7 D013485
700    1_
$a Ambrožová, Iva $7 _AN059503 $u Nuclear Physics Institute, Academy of Sciences of Czech Republic, Prague, Czech Republic
700    1_
$a Spurný, František, $d 1942-2010 $7 jn20000710580 $u Department of Radiation Dosimetry, Nuclear Physics Institute, Czech Academy of Sciences, Na Truhlářce 39/64, 18086 Praha 8, Czech Repub
773    0_
$w MED00004029 $t Radiation protection dosimetry $x 1742-3406 $g Roč. 143, č. 2-4 (2011), s. 440-44
856    41
$u https://pubmed.ncbi.nlm.nih.gov/21156782 $y Pubmed
910    __
$a ABA008 $b sig $c sign $y m $z 0
990    __
$a 20120816 $b ABA008
991    __
$a 20160329164605 $b ABA008
999    __
$a ok $b bmc $g 949262 $s 784566
BAS    __
$a 3
BAS    __
$a PreBMC
BMC    __
$a 2011 $b 143 $c 2-4 $d 440-44 $i 1742-3406 $m Radiation protection dosimetry $n Radiat Prot Dosimetry $x MED00004029
LZP    __
$b NLK112 $a Pubmed-20120816/11/02

Najít záznam

Citační ukazatele

Možnosti archivace