• Je něco špatně v tomto záznamu ?

Surface treatment by electric discharge machining of Ti-6Al-4V alloy for potential application in orthopaedics

P. Harcuba, L. Bačáková, J. Stráský, M. Bačáková, K. Novotná, M. Janeček,

. 2012 ; 7 () : 96-105.

Jazyk angličtina Země Nizozemsko

Typ dokumentu časopisecké články, práce podpořená grantem

Perzistentní odkaz   https://www.medvik.cz/link/bmc12034732

This study investigated the properties of Ti-6Al-4V alloy after surface treatment by the electric discharge machining (EDM) process. The EDM process with high peak currents proved to induce surface macro-roughness and to cause chemical changes to the surface. Evaluations were made of the mechanical properties by means of tensile tests, and of surface roughness for different peak currents of the EDM process. The EDM process with peak current of 29 A was found to induce sufficient surface roughness, and to have a low adverse effect on tensile properties. The chemical changes were studied by scanning electron microscopy equipped with an energy dispersive X-ray analyser (EDX). The surface of the benchmark samples was obtained by plasma-spraying a titanium dioxide coating. An investigation of the biocompatibility of the surface-treated Ti-6Al-4V samples in cultures of human osteoblast-like MG 63 cells revealed that the samples modified by EDM provided better substrates for the adhesion, growth and viability of MG 63 cells than the TiO2 coated surface. Thus, EDM treatment can be considered as a promising surface modification to orthopaedic implants, in which good integration with the surrounding bone tissue is required.

Citace poskytuje Crossref.org

000      
00000naa a2200000 a 4500
001      
bmc12034732
003      
CZ-PrNML
005      
20121207121735.0
007      
ta
008      
121023s2012 ne f 000 0|eng||
009      
AR
024    7_
$a 10.1016/j.jmbbm.2011.07.001 $2 doi
035    __
$a (PubMed)22340689
040    __
$a ABA008 $b cze $d ABA008 $e AACR2
041    0_
$a eng
044    __
$a ne
100    1_
$a Harcuba, Petr $u Charles University, Department of Physics of Materials, Prague, Czech Republic.
245    10
$a Surface treatment by electric discharge machining of Ti-6Al-4V alloy for potential application in orthopaedics / $c P. Harcuba, L. Bačáková, J. Stráský, M. Bačáková, K. Novotná, M. Janeček,
520    9_
$a This study investigated the properties of Ti-6Al-4V alloy after surface treatment by the electric discharge machining (EDM) process. The EDM process with high peak currents proved to induce surface macro-roughness and to cause chemical changes to the surface. Evaluations were made of the mechanical properties by means of tensile tests, and of surface roughness for different peak currents of the EDM process. The EDM process with peak current of 29 A was found to induce sufficient surface roughness, and to have a low adverse effect on tensile properties. The chemical changes were studied by scanning electron microscopy equipped with an energy dispersive X-ray analyser (EDX). The surface of the benchmark samples was obtained by plasma-spraying a titanium dioxide coating. An investigation of the biocompatibility of the surface-treated Ti-6Al-4V samples in cultures of human osteoblast-like MG 63 cells revealed that the samples modified by EDM provided better substrates for the adhesion, growth and viability of MG 63 cells than the TiO2 coated surface. Thus, EDM treatment can be considered as a promising surface modification to orthopaedic implants, in which good integration with the surrounding bone tissue is required.
650    _2
$a slitiny $x chemie $7 D000497
650    _2
$a biokompatibilní materiály $x chemie $7 D001672
650    _2
$a kosti a kostní tkáň $7 D001842
650    _2
$a biokompatibilní potahované materiály $x chemie $7 D020099
650    _2
$a lidé $7 D006801
650    _2
$a testování materiálů $7 D008422
650    _2
$a protézy a implantáty $7 D019736
650    _2
$a povrchové vlastnosti $7 D013499
650    _2
$a titan $x chemie $7 D014025
655    _2
$a časopisecké články $7 D016428
655    _2
$a práce podpořená grantem $7 D013485
700    1_
$a Bačáková, Lucie
700    1_
$a Stráský, Josef
700    1_
$a Bačáková, Markéta
700    1_
$a Novotná, Katarína
700    1_
$a Janeček, Miloš
773    0_
$w MED00166961 $t Journal of the mechanical behavior of biomedical materials $x 1878-0180 $g Roč. 7(2012), s. 96-105
856    41
$u https://pubmed.ncbi.nlm.nih.gov/22340689 $y Pubmed
910    __
$a ABA008 $b sig $c sign $y a
990    __
$a 20121023 $b ABA008
991    __
$a 20121207121810 $b ABA008
999    __
$a ok $b bmc $g 956742 $s 792229
BAS    __
$a 3
BAS    __
$a PreBMC
BMC    __
$a 2012 $b 7 $d 96-105 $i 1878-0180 $m Journal of the mechanical behavior of biomedical materials $n J Mech Behav Biomed Mater $x MED00166961
LZP    __
$a Pubmed-20121023

Najít záznam

Citační ukazatele

Pouze přihlášení uživatelé

Možnosti archivace