Nanotubes with diameters ranging from 40 to 60nm were prepared by electrochemical oxidation of the Ti-6Al-4V alloy in electrolyte containing ammonium sulphate and ammonium fluoride. The nanotubes were further modified with calcium and phosphate ions or were heat treated. Polished Ti-6Al-4V alloy served as a reference sample. The spreading of human osteoblast-like cells was similar on all nanotube samples but lower than on polished samples. The number of initially adhered cells was higher on non-modified nanotubes, but the final cell number was the highest on Ca-enriched nanotubes and the lowest on heat-treated nanotubes. However, these differences were relatively small and less pronounced than the differences in the concentration of specific molecular markers of cell adhesion and differentiation, estimated by their intensity of immunofluorescence staining. The concentration of vinculin, i.e. a protein of focal adhesion plaques, was the lowest on nanotubes modified with calcium. Collagen I, an early marker of osteogenic cell differentiation, was also the lowest on samples modified with calcium and was highest on polished samples. Alkaline phosphatase, a middle marker of osteogenic differentiation, was observed in lowest concentration on nanotubes modified with phosphorus and the highest on heat-treated samples. Osteocalcin concentrations, a late marker of osteogenic cell differentiation, were similar on all tested samples, although they tended to be the highest on heat-treated samples. Thus, osteogenic differentiation can be modulated by various additional treatments of nanotube coatings on Ti-6Al-4V implants.

Department of Biomaterials and Tissue Engineering Institute of Physiology of the Czech Academy of Sciences Czech Republic

University of Chemistry and Technology Prague Department of Metals and Corrosion Engineering Technicka 5 Prague 6 Czech Republic

000      

00000naa a2200000 a 4500

001      

bmc17024000

003      

CZ-PrNML

005      

20201019140508.0

007      

ta

008      

170720s2016 ne f 000 0|eng||

009      

AR

024    7_

$a 10.1016/j.msec.2016.04.037 $2 doi

035    __

$a (PubMed)27157757

040    __

$a ABA008 $b cze $d ABA008 $e AACR2

041    0_

$a eng

044    __

$a ne

100    1_

$a Moravec, Hynek $u University of Chemistry and Technology, Prague, Department of Metals and Corrosion Engineering, Technicka 5, Prague 6, Czech Republic. Electronic address: moravech@vscht.cz.

245    10

$a Cell interaction with modified nanotubes formed on titanium alloy Ti-6Al-4V / $c H. Moravec, M. Vandrovcova, K. Chotova, J. Fojt, E. Pruchova, L. Joska, L. Bacakova,

520    9_

$a Nanotubes with diameters ranging from 40 to 60nm were prepared by electrochemical oxidation of the Ti-6Al-4V alloy in electrolyte containing ammonium sulphate and ammonium fluoride. The nanotubes were further modified with calcium and phosphate ions or were heat treated. Polished Ti-6Al-4V alloy served as a reference sample. The spreading of human osteoblast-like cells was similar on all nanotube samples but lower than on polished samples. The number of initially adhered cells was higher on non-modified nanotubes, but the final cell number was the highest on Ca-enriched nanotubes and the lowest on heat-treated nanotubes. However, these differences were relatively small and less pronounced than the differences in the concentration of specific molecular markers of cell adhesion and differentiation, estimated by their intensity of immunofluorescence staining. The concentration of vinculin, i.e. a protein of focal adhesion plaques, was the lowest on nanotubes modified with calcium. Collagen I, an early marker of osteogenic cell differentiation, was also the lowest on samples modified with calcium and was highest on polished samples. Alkaline phosphatase, a middle marker of osteogenic differentiation, was observed in lowest concentration on nanotubes modified with phosphorus and the highest on heat-treated samples. Osteocalcin concentrations, a late marker of osteogenic cell differentiation, were similar on all tested samples, although they tended to be the highest on heat-treated samples. Thus, osteogenic differentiation can be modulated by various additional treatments of nanotube coatings on Ti-6Al-4V implants.

650    _2

$a vápník $x chemie $7 D002118

650    _2

$a buněčná adheze $x účinky léků $7 D002448

650    _2

$a buněčná diferenciace $x účinky léků $7 D002454

650    _2

$a nádorové buněčné linie $7 D045744

650    _2

$a kolagen typu I $x metabolismus $7 D024042

650    _2

$a lidé $7 D006801

650    _2

$a fluorescenční mikroskopie $7 D008856

650    _2

$a nanotrubičky $x chemie $7 D043942

650    _2

$a osteoblasty $x cytologie $x metabolismus $7 D010006

650    _2

$a osteokalcin $x metabolismus $7 D015675

650    _2

$a titan $x chemie $x farmakologie $7 D014025

650    _2

$a vinkulin $x chemie $7 D016596

655    _2

$a časopisecké články $7 D016428

700    1_

$a Vandrovcova, Marta $u Department of Biomaterials and Tissue Engineering, Institute of Physiology of the Czech Academy of Sciences, Czech Republic.

700    1_

$a Chotova, Katerina $u University of Chemistry and Technology, Prague, Department of Metals and Corrosion Engineering, Technicka 5, Prague 6, Czech Republic.

700    1_

$a Fojt, Jaroslav $u University of Chemistry and Technology, Prague, Department of Metals and Corrosion Engineering, Technicka 5, Prague 6, Czech Republic.

700    1_

$a Pruchova, Eva $u University of Chemistry and Technology, Prague, Department of Metals and Corrosion Engineering, Technicka 5, Prague 6, Czech Republic.

700    1_

$a Joska, Ludek $u University of Chemistry and Technology, Prague, Department of Metals and Corrosion Engineering, Technicka 5, Prague 6, Czech Republic.

700    1_

$a Bacakova, Lucie $u Department of Biomaterials and Tissue Engineering, Institute of Physiology of the Czech Academy of Sciences, Czech Republic.

773    0_

$w MED00184559 $t Materials science & engineering. C, Materials for biological applications $x 1873-0191 $g Roč. 65, č. - (2016), s. 313-22

856    41

$u https://pubmed.ncbi.nlm.nih.gov/27157757 $y Pubmed

910    __

$a ABA008 $b sig $c sign $y a $z 0

990    __

$a 20170720 $b ABA008

991    __

$a 20201019140508 $b ABA008

999    __

$a ok $b bmc $g 1239681 $s 984913

BAS    __

$a 3

BAS    __

$a PreBMC

BMC    __

$a 2016 $b 65 $c - $d 313-22 $e 20160413 $i 1873-0191 $m Materials science & engineering. C, Materials for biological applications $n Mater Sci Eng C Mater Biol Appl $x MED00184559

GRA    __

$a NV15-27726A $p MZ0

LZP    __

$a Pubmed-20170720