-
Something wrong with this record ?
Calcium Phosphate Foams: Potential Scaffolds for Bone Tissue Modeling in Three Dimensions
EB. Montufar, L. Vojtova, L. Celko, MP. Ginebra,
Language English Country United States
Document type Journal Article
- MeSH
- Models, Biological * MeSH
- Cell Culture Techniques MeSH
- Cellular Microenvironment MeSH
- Calcium Phosphates chemistry MeSH
- Bone and Bones cytology MeSH
- Rats MeSH
- Porosity MeSH
- Materials Testing MeSH
- Tissue Engineering methods MeSH
- Tissue Scaffolds chemistry MeSH
- Particle Size MeSH
- Manufactured Materials MeSH
- Animals MeSH
- Check Tag
- Rats MeSH
- Animals MeSH
- Publication type
- Journal Article MeSH
The present method describes the procedure to fabricate calcium phosphate foams with suitable open porosity, pore size, and composition to perform three-dimensional (3D) cell cultures with the objective to simulate the bone tissue microenvironment in vitro. Foams with two compositions but equivalent porosity can be fabricated. On the one hand, hydroxyapatite foams obtained by hydrolysis at 37 °C, with microstructure that mimics the small crystal size of the mineral component of bones, and on the other hand, beta tricalcium phosphate foams with polygonal grains obtained by sintering at 1100 °C. In the first part of the chapter the calcium phosphate foams are briefly described. Afterwards, the foaming process is described in detail, including alternatives to overcome processing problems than can arise. Finally, insights are provided on how to perform 3D cell cultures using the calcium phosphate foams as substrates.
References provided by Crossref.org
- 000
- 00000naa a2200000 a 4500
- 001
- bmc18010471
- 003
- CZ-PrNML
- 005
- 20180404142043.0
- 007
- ta
- 008
- 180404s2017 xxu f 000 0|eng||
- 009
- AR
- 024 7_
- $a 10.1007/978-1-4939-7021-6_6 $2 doi
- 035 __
- $a (PubMed)28634936
- 040 __
- $a ABA008 $b cze $d ABA008 $e AACR2
- 041 0_
- $a eng
- 044 __
- $a xxu
- 100 1_
- $a Montufar, Edgar B $u CEITEC - Central European Institute of Technology, Brno University of Technology, Purkyňova 123, Brno 612 00, Czech Republic. eb.montufar@ceitec.vutbr.cz. Biomaterials, Biomechanics and Tissue Engineering Group, Department of Materials Science and Metallurgical Engineering, Technical University of Catalonia, Barcelona, Spain. eb.montufar@ceitec.vutbr.cz.
- 245 10
- $a Calcium Phosphate Foams: Potential Scaffolds for Bone Tissue Modeling in Three Dimensions / $c EB. Montufar, L. Vojtova, L. Celko, MP. Ginebra,
- 520 9_
- $a The present method describes the procedure to fabricate calcium phosphate foams with suitable open porosity, pore size, and composition to perform three-dimensional (3D) cell cultures with the objective to simulate the bone tissue microenvironment in vitro. Foams with two compositions but equivalent porosity can be fabricated. On the one hand, hydroxyapatite foams obtained by hydrolysis at 37 °C, with microstructure that mimics the small crystal size of the mineral component of bones, and on the other hand, beta tricalcium phosphate foams with polygonal grains obtained by sintering at 1100 °C. In the first part of the chapter the calcium phosphate foams are briefly described. Afterwards, the foaming process is described in detail, including alternatives to overcome processing problems than can arise. Finally, insights are provided on how to perform 3D cell cultures using the calcium phosphate foams as substrates.
- 650 _2
- $a zvířata $7 D000818
- 650 _2
- $a kosti a kostní tkáň $x cytologie $7 D001842
- 650 _2
- $a fosforečnany vápenaté $x chemie $7 D002130
- 650 _2
- $a buněčné kultury $7 D018929
- 650 _2
- $a buněčné mikroprostředí $7 D060833
- 650 _2
- $a vyrobené materiály $7 D008420
- 650 _2
- $a testování materiálů $7 D008422
- 650 12
- $a biologické modely $7 D008954
- 650 _2
- $a velikost částic $7 D010316
- 650 _2
- $a poréznost $7 D016062
- 650 _2
- $a krysa rodu Rattus $7 D051381
- 650 _2
- $a tkáňové inženýrství $x metody $7 D023822
- 650 _2
- $a tkáňové podpůrné struktury $x chemie $7 D054457
- 655 _2
- $a časopisecké články $7 D016428
- 700 1_
- $a Vojtova, Lucy $u CEITEC - Central European Institute of Technology, Brno University of Technology, Purkyňova 123, Brno 612 00, Czech Republic.
- 700 1_
- $a Celko, Ladislav $u CEITEC - Central European Institute of Technology, Brno University of Technology, Purkyňova 123, Brno 612 00, Czech Republic.
- 700 1_
- $a Ginebra, Maria-Pau $u Biomaterials, Biomechanics and Tissue Engineering Group, Department of Materials Science and Metallurgical Engineering, Technical University of Catalonia, Barcelona, Spain.
- 773 0_
- $w MED00180389 $t Methods in molecular biology (Clifton, N.J.) $x 1940-6029 $g Roč. 1612, č. - (2017), s. 79-94
- 856 41
- $u https://pubmed.ncbi.nlm.nih.gov/28634936 $y Pubmed
- 910 __
- $a ABA008 $b sig $c sign $y a $z 0
- 990 __
- $a 20180404 $b ABA008
- 991 __
- $a 20180404142123 $b ABA008
- 999 __
- $a ok $b bmc $g 1287956 $s 1007283
- BAS __
- $a 3
- BAS __
- $a PreBMC
- BMC __
- $a 2017 $b 1612 $c - $d 79-94 $i 1940-6029 $m Methods in molecular biology $n Methods Mol Biol $x MED00180389
- LZP __
- $a Pubmed-20180404
