-
Je něco špatně v tomto záznamu ?
Antibacterial, mechanical and surface properties of Ag-DLC films prepared by dual PLD for medical applications
P. Písařík, M. Jelínek, J. Remsa, J. Mikšovský, J. Zemek, K. Jurek, Š. Kubinová, J. Lukeš, J. Šepitka,
Jazyk angličtina Země Nizozemsko
Typ dokumentu časopisecké články
- MeSH
- antibakteriální látky chemie MeSH
- diamant MeSH
- povrchové vlastnosti MeSH
- pyridoxal analogy a deriváty MeSH
- stříbro MeSH
- uhlík MeSH
- Publikační typ
- časopisecké články MeSH
Silver doped diamond-like carbon layers were deposited by dual pulsed laser deposition using two KrF excimer lasers. The concentration of Ag, determined by XPS and WDS, moved from zero to ~10at%. We found that the sp2/sp3ratio, film roughness and the number of droplets (SEM and AFM) increased with increasing silver concentration. The sp3content measurement (XPS) was influenced by ion cluster surface sputtering and varied from 71.0% (undoped DLC) to 36.2% (for 9.3at% Ag). Transmission was measured on the scale from 200nm to 1100nm, and decreased with increasing silver content. An increase of Ag content has an effect on the decrease of the storage modulus (E') and the indentation hardness (HIT). The highest values HIT=51.9GPa and E'=270.6GPa were measured on a sample with 0at% Ag. The lowest values HIT=26.0GPa and E'=180.2GPa were measured on a sample of 9.3at% Ag. Film adhesion was studied using the scratch test and was up to 20.8N for the highest Ag concentration. The contact angle (CA) measurements for water showed that the CA of Ag-DLC films was higher (78°-98°) that of DLC film (77°). The surface free energy of DLC and of Ag-DLC was about 40mJ·m-2. Antibacterial properties were studied using gram positive and gram negative bacteria. The antibacterial effects increased with the Ag concentration and were ~99.9% after 24h for the layers with the highest silver content (9.3at%). Our results demonstrate that the Ag-doped DLC films are potentially useful biomaterials having both good mechanical properties and antimicrobial characteristics. PRIME NOVELTY STATEMENT: Unique manufacturing technique dual pulsed laser deposition was applied on hydrogen-free diamond-like carbon doped by Ag including topological, physical and antibacterial characterization.
Citace poskytuje Crossref.org
- 000
- 00000naa a2200000 a 4500
- 001
- bmc18010541
- 003
- CZ-PrNML
- 005
- 20180404142109.0
- 007
- ta
- 008
- 180404s2017 ne f 000 0|eng||
- 009
- AR
- 024 7_
- $a 10.1016/j.msec.2017.04.005 $2 doi
- 035 __
- $a (PubMed)28532116
- 040 __
- $a ABA008 $b cze $d ABA008 $e AACR2
- 041 0_
- $a eng
- 044 __
- $a ne
- 100 1_
- $a Písařík, P $u Czech Technical University in Prague, Faculty of Biomedical Engineering, Sitna sq. 3105, 272 01 Kladno, Czech Republic; Institute of Physics of the Czech Academy of Sciences, Na Slovance 2, 182 21 Prague 8, Czech Republic. Electronic address: petr.pisarik@fbmi.cvut.cz.
- 245 10
- $a Antibacterial, mechanical and surface properties of Ag-DLC films prepared by dual PLD for medical applications / $c P. Písařík, M. Jelínek, J. Remsa, J. Mikšovský, J. Zemek, K. Jurek, Š. Kubinová, J. Lukeš, J. Šepitka,
- 520 9_
- $a Silver doped diamond-like carbon layers were deposited by dual pulsed laser deposition using two KrF excimer lasers. The concentration of Ag, determined by XPS and WDS, moved from zero to ~10at%. We found that the sp2/sp3ratio, film roughness and the number of droplets (SEM and AFM) increased with increasing silver concentration. The sp3content measurement (XPS) was influenced by ion cluster surface sputtering and varied from 71.0% (undoped DLC) to 36.2% (for 9.3at% Ag). Transmission was measured on the scale from 200nm to 1100nm, and decreased with increasing silver content. An increase of Ag content has an effect on the decrease of the storage modulus (E') and the indentation hardness (HIT). The highest values HIT=51.9GPa and E'=270.6GPa were measured on a sample with 0at% Ag. The lowest values HIT=26.0GPa and E'=180.2GPa were measured on a sample of 9.3at% Ag. Film adhesion was studied using the scratch test and was up to 20.8N for the highest Ag concentration. The contact angle (CA) measurements for water showed that the CA of Ag-DLC films was higher (78°-98°) that of DLC film (77°). The surface free energy of DLC and of Ag-DLC was about 40mJ·m-2. Antibacterial properties were studied using gram positive and gram negative bacteria. The antibacterial effects increased with the Ag concentration and were ~99.9% after 24h for the layers with the highest silver content (9.3at%). Our results demonstrate that the Ag-doped DLC films are potentially useful biomaterials having both good mechanical properties and antimicrobial characteristics. PRIME NOVELTY STATEMENT: Unique manufacturing technique dual pulsed laser deposition was applied on hydrogen-free diamond-like carbon doped by Ag including topological, physical and antibacterial characterization.
- 650 _2
- $a antibakteriální látky $x chemie $7 D000900
- 650 _2
- $a uhlík $7 D002244
- 650 _2
- $a diamant $7 D018130
- 650 _2
- $a pyridoxal $x analogy a deriváty $7 D011730
- 650 _2
- $a stříbro $7 D012834
- 650 _2
- $a povrchové vlastnosti $7 D013499
- 655 _2
- $a časopisecké články $7 D016428
- 700 1_
- $a Jelínek, M $u Czech Technical University in Prague, Faculty of Biomedical Engineering, Sitna sq. 3105, 272 01 Kladno, Czech Republic; Institute of Physics of the Czech Academy of Sciences, Na Slovance 2, 182 21 Prague 8, Czech Republic.
- 700 1_
- $a Remsa, J $u Czech Technical University in Prague, Faculty of Biomedical Engineering, Sitna sq. 3105, 272 01 Kladno, Czech Republic; Institute of Physics of the Czech Academy of Sciences, Na Slovance 2, 182 21 Prague 8, Czech Republic.
- 700 1_
- $a Mikšovský, J $u Czech Technical University in Prague, Faculty of Biomedical Engineering, Sitna sq. 3105, 272 01 Kladno, Czech Republic; Institute of Physics of the Czech Academy of Sciences, Na Slovance 2, 182 21 Prague 8, Czech Republic.
- 700 1_
- $a Zemek, J $u Institute of Physics of the Czech Academy of Sciences, Na Slovance 2, 182 21 Prague 8, Czech Republic.
- 700 1_
- $a Jurek, K $u Institute of Physics of the Czech Academy of Sciences, Na Slovance 2, 182 21 Prague 8, Czech Republic.
- 700 1_
- $a Kubinová, Š $u Institute of Physics of the Czech Academy of Sciences, Na Slovance 2, 182 21 Prague 8, Czech Republic.
- 700 1_
- $a Lukeš, J $u Czech Technical University in Prague, Faculty of Mechanical Engineering, Technicka 4, 166 07 Prague, Czech Republic.
- 700 1_
- $a Šepitka, J $u Czech Technical University in Prague, Faculty of Mechanical Engineering, Technicka 4, 166 07 Prague, Czech Republic.
- 773 0_
- $w MED00184559 $t Materials science & engineering. C, Materials for biological applications $x 1873-0191 $g Roč. 77, č. - (2017), s. 955-962
- 856 41
- $u https://pubmed.ncbi.nlm.nih.gov/28532116 $y Pubmed
- 910 __
- $a ABA008 $b sig $c sign $y a $z 0
- 990 __
- $a 20180404 $b ABA008
- 991 __
- $a 20180404142149 $b ABA008
- 999 __
- $a ok $b bmc $g 1288026 $s 1007353
- BAS __
- $a 3
- BAS __
- $a PreBMC
- BMC __
- $a 2017 $b 77 $c - $d 955-962 $e 20170406 $i 1873-0191 $m Materials science & engineering. C, Materials for biological applications $n Mater Sci Eng C Mater Biol Appl $x MED00184559
- LZP __
- $a Pubmed-20180404
