• Je něco špatně v tomto záznamu ?

Performance of radiofrequency ablation used for metastatic spinal tumor: Numerical approach

L. Capek, P. Henys, P. Barsa, V. Dvorak,

. 2017 ; 231 (9) : 814-820. [pub] 20170509

Jazyk angličtina Země Anglie, Velká Británie

Typ dokumentu časopisecké články

Perzistentní odkaz   https://www.medvik.cz/link/bmc18025037

Surgical treatment of spine metastases follows only local anatomical and biomechanical objectives. Few cases of actual solitary metastases are rather exceptional, while removal of these metastases and the primary tumor may help to eradicate the process. The aim of our subsequent numerical simulations was to find out the temperature distribution and the volume lesion in a spinal tumor. For this purpose, the parametric three-dimensional numerical model was developed. It was shown that by finite element modeling approach not only the temperature distribution but even the resulted cavity may be estimated. The numerical approach was shown as a strong tool in surgery planning.

Citace poskytuje Crossref.org

000      
00000naa a2200000 a 4500
001      
bmc18025037
003      
CZ-PrNML
005      
20180719094721.0
007      
ta
008      
180709s2017 enk f 000 0|eng||
009      
AR
024    7_
$a 10.1177/0954411917706250 $2 doi
035    __
$a (PubMed)28486874
040    __
$a ABA008 $b cze $d ABA008 $e AACR2
041    0_
$a eng
044    __
$a enk
100    1_
$a Capek, Lukas $u 1 Department of Textile Technologies, Technical University of Liberec, Liberec, Czech Republic.
245    10
$a Performance of radiofrequency ablation used for metastatic spinal tumor: Numerical approach / $c L. Capek, P. Henys, P. Barsa, V. Dvorak,
520    9_
$a Surgical treatment of spine metastases follows only local anatomical and biomechanical objectives. Few cases of actual solitary metastases are rather exceptional, while removal of these metastases and the primary tumor may help to eradicate the process. The aim of our subsequent numerical simulations was to find out the temperature distribution and the volume lesion in a spinal tumor. For this purpose, the parametric three-dimensional numerical model was developed. It was shown that by finite element modeling approach not only the temperature distribution but even the resulted cavity may be estimated. The numerical approach was shown as a strong tool in surgery planning.
650    12
$a katetrizační ablace $7 D017115
650    12
$a analýza metodou konečných prvků $7 D020342
650    _2
$a metastázy nádorů $7 D009362
650    _2
$a nádory páteře $x patologie $x chirurgie $7 D013125
650    _2
$a teplota $7 D013696
655    _2
$a časopisecké články $7 D016428
700    1_
$a Henys, Petr $u 1 Department of Textile Technologies, Technical University of Liberec, Liberec, Czech Republic.
700    1_
$a Barsa, Pavel $u 2 Department of Neurosurgery, Regional Hospital of Liberec, Liberec, Czech Republic.
700    1_
$a Dvorak, Vaclav $u 3 Department of Power Engineering Equipment, Technical University of Liberec, Liberec, Czech Republic.
773    0_
$w MED00008931 $t Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine $x 2041-3033 $g Roč. 231, č. 9 (2017), s. 814-820
856    41
$u https://pubmed.ncbi.nlm.nih.gov/28486874 $y Pubmed
910    __
$a ABA008 $b sig $c sign $y a $z 0
990    __
$a 20180709 $b ABA008
991    __
$a 20180719095022 $b ABA008
999    __
$a ok $b bmc $g 1317168 $s 1021958
BAS    __
$a 3
BAS    __
$a PreBMC
BMC    __
$a 2017 $b 231 $c 9 $d 814-820 $e 20170509 $i 2041-3033 $m Proceedings of the Institution of Mechanical Engineers. Part H, Journal of Engineering in Medicine $n Proc Inst Mech Eng [H] $x MED00008931
LZP    __
$a Pubmed-20180709

Najít záznam

Citační ukazatele

Možnosti archivace