Detail
Článek
Web zdroj
FT
Medvik - BMČ
  • Je něco špatně v tomto záznamu ?

Immediate dentin sealing: effect of sandblasting on the layer thickness

T. Kovalsky, I. Voborna, T. Ingr, Y. Morozova, E. Misova, M. Hepova

. 2022 ; 123 (2) : 87-91.

Jazyk angličtina Země Slovensko

Typ dokumentu pozorovací studie, práce podpořená grantem

Perzistentní odkaz   https://www.medvik.cz/link/bmc22026096

OBJECTIVES: The objective of this study was to observe and to measure the impact of corundum sandblasting on the thickness of the Immediate dentin sealing layer. METHODS: 20 recently extracted molars were collected and divided randomly into two groups. A standardized preparation was performed on each tooth and the Optibond FL dentin bonding agent (Kerr, Orange, USA) was applied on the prepared surface according to the manufacturer’s instructions. The surface was then partially sandblasted. RONDOflex plus 360 (KaVo, Bieberach an der Riss, Germany) and Airsonic Mini-Sandblaster (Hager et Werken, Duisburg, Germany) were used. Microscope observations were made. RESULTS: The arithmetic mean of the Optibond FL dentin bonding agent film thickness was 48.72 μm (Group 1=45.55 μm and Group 2=51.88 μm). The dentin bonding agent layer thickness was reduced to the average value of 17,12 μm by RONDOflex plus 360 sandblasting (Group 1). The zero value was recorded in 16 % of the locations. The Airsonic Mini-Sandblaster sandblasting changed the average thickness of the dentin bonding agent layer to 13.25 μm with 31 % of zero values (Group 2). CONCLUSION: The results of this research lead to a reflection on modifications of the immediate dentin sealing procedure (Tab. 4, Fig. 3, Ref. 28).

Citace poskytuje Crossref.org

Bibliografie atd.

Literatura

000      
00000naa a2200000 a 4500
001      
bmc22026096
003      
CZ-PrNML
005      
20230110133728.0
007      
ta
008      
221102s2022 xo ad fs 000 0|eng||
009      
AR
024    0_
$a 10.4149/BLL_2022_015 $2 doi
040    __
$a ABA008 $d ABA008 $e AACR2 $b cze
041    0_
$a eng
044    __
$a xo
100    1_
$a Kovalský, Tomáš $7 xx0258223 $u Institute of Dentistry and Oral Sciences, Faculty of Medicine and Dentistry, Palacky University, Olomouc, Czech Republic
245    10
$a Immediate dentin sealing: effect of sandblasting on the layer thickness / $c T. Kovalsky, I. Voborna, T. Ingr, Y. Morozova, E. Misova, M. Hepova
504    __
$a Literatura
520    9_
$a OBJECTIVES: The objective of this study was to observe and to measure the impact of corundum sandblasting on the thickness of the Immediate dentin sealing layer. METHODS: 20 recently extracted molars were collected and divided randomly into two groups. A standardized preparation was performed on each tooth and the Optibond FL dentin bonding agent (Kerr, Orange, USA) was applied on the prepared surface according to the manufacturer’s instructions. The surface was then partially sandblasted. RONDOflex plus 360 (KaVo, Bieberach an der Riss, Germany) and Airsonic Mini-Sandblaster (Hager et Werken, Duisburg, Germany) were used. Microscope observations were made. RESULTS: The arithmetic mean of the Optibond FL dentin bonding agent film thickness was 48.72 μm (Group 1=45.55 μm and Group 2=51.88 μm). The dentin bonding agent layer thickness was reduced to the average value of 17,12 μm by RONDOflex plus 360 sandblasting (Group 1). The zero value was recorded in 16 % of the locations. The Airsonic Mini-Sandblaster sandblasting changed the average thickness of the dentin bonding agent layer to 13.25 μm with 31 % of zero values (Group 2). CONCLUSION: The results of this research lead to a reflection on modifications of the immediate dentin sealing procedure (Tab. 4, Fig. 3, Ref. 28).
650    _7
$a lidé $7 D006801 $2 czmesh
650    _7
$a oxid hlinitý $7 D000537 $2 czmesh
650    17
$a pískování zubů $x metody $7 D020906 $2 czmesh
650    17
$a dentinová adheziva $x klasifikace $7 D017220 $2 czmesh
650    _7
$a moláry $x účinky léků $7 D008963 $2 czmesh
650    _7
$a zubní sklovina $x diagnostické zobrazování $x účinky léků $7 D003743 $2 czmesh
650    _7
$a statistika jako téma $7 D013223 $2 czmesh
650    _7
$a mikroskopie $7 D008853 $2 czmesh
655    _7
$a pozorovací studie $7 D064888 $2 czmesh
655    _7
$a práce podpořená grantem $7 D013485 $2 czmesh
700    1_
$a Voborná, Iva $7 xx0238050 $u Institute of Dentistry and Oral Sciences, Faculty of Medicine and Dentistry, Palacky University, Olomouc, Czech Republic
700    1_
$a Ingr, T. $7 _AN115193 $u Department of Experimental Physics, Faculty of Science, Palacky University, Olomouc, Czech Republic $u Department of Physical Chemistry, Faculty of Science, Palacky University, Olomouc, Czech Republic
700    1_
$a Morozova, Yulia $7 xx0233946 $u Institute of Dentistry and Oral Sciences, Faculty of Medicine and Dentistry, Palacky University, Olomouc, Czech Republic
700    1_
$a Míšová, Eva, $d 1983- $7 xx0238051 $u Institute of Dentistry and Oral Sciences, Faculty of Medicine and Dentistry, Palacky University, Olomouc, Czech Republic
700    1_
$a Hepová, Monika $7 xx0266360 $u Institute of Dentistry and Oral Sciences, Faculty of Medicine and Dentistry, Palacky University, Olomouc, Czech Republic
773    0_
$t Bratislavské lekárske listy $x 0006-9248 $g Roč. 123, č. 2 (2022), s. 87-91 $w MED00000845
856    41
$u http://www.elis.sk/download_file.php?product_id=7529&session_id=5hob67buame1h4jbqk1qin6737 $y plný text volně přístupný
910    __
$a ABA008 $b online $c 1067 $y p $z 0
990    __
$a 20221101161338 $b ABA008
991    __
$a 20230110133724 $b ABA008
999    __
$a ok $b bmc $g 1855740 $s 1177400
BAS    __
$a 3
BMC    __
$a 2022 $b 123 $c 2 $d 87-91 $i 0006-9248 $m Bratislavské lekárske listy $x MED00000845
LZP    __
$c NLK189 $d 20221217 $a NLK 2022-22/kv

Najít záznam

Citační ukazatele

    Možnosti archivace