-
Je něco špatně v tomto záznamu ?
Design and performance of a flow sensor CoroQuant used with emergency lung ventilator CoroVent during COVID-19 pandemic
L. Bís, K. Roubík
Status neindexováno Jazyk angličtina Země Anglie, Velká Británie
Typ dokumentu časopisecké články
- Publikační typ
- časopisecké články MeSH
At the time of COVID-19 pandemic onset in spring 2020 a project CoroVent was initiated with the aim to design and produce emergency lung ventilators and distribute them to hospitals. No flow and tidal volume sensors were available for the project. The lack of tidal volume sensors was a consequence of the rapidly increased demand for mechanical lung ventilators and their consumables. The aim of the study was to develop a special flow sensor CoroQuant for the CoroVent ventilators. The sensor based on pneumotachographic principle, manufactured by the plastic injection moulding of polypropylene, meets the requirements for precision of tidal volume measurement defined by international standard ISO 80601-2-12 for mechanical lung ventilators. CoroVent ventilators with CoroQuant sensors were distributed to 27 hospitals in the Czech Republic for free upon the requests from the medical facilities and started to be clinically used, thus preventing lack of lung ventilators in hospitals in the Czech Republic.
Citace poskytuje Crossref.org
- 000
- 00000naa a2200000 a 4500
- 001
- bmc23003382
- 003
- CZ-PrNML
- 005
- 20230421100155.0
- 007
- ta
- 008
- 230413s2022 enk f 000 0|eng||
- 009
- AR
- 024 7_
- $a 10.1016/j.measen.2022.100383 $2 doi
- 035 __
- $a (PubMed)36721675
- 040 __
- $a ABA008 $b cze $d ABA008 $e AACR2
- 041 0_
- $a eng
- 044 __
- $a enk
- 100 1_
- $a Bís, Ladislav $u Department of Biomedical Technology, Faculty of Biomedical Engineering, Czech Technical University in Prague, Czechia
- 245 10
- $a Design and performance of a flow sensor CoroQuant used with emergency lung ventilator CoroVent during COVID-19 pandemic / $c L. Bís, K. Roubík
- 520 9_
- $a At the time of COVID-19 pandemic onset in spring 2020 a project CoroVent was initiated with the aim to design and produce emergency lung ventilators and distribute them to hospitals. No flow and tidal volume sensors were available for the project. The lack of tidal volume sensors was a consequence of the rapidly increased demand for mechanical lung ventilators and their consumables. The aim of the study was to develop a special flow sensor CoroQuant for the CoroVent ventilators. The sensor based on pneumotachographic principle, manufactured by the plastic injection moulding of polypropylene, meets the requirements for precision of tidal volume measurement defined by international standard ISO 80601-2-12 for mechanical lung ventilators. CoroVent ventilators with CoroQuant sensors were distributed to 27 hospitals in the Czech Republic for free upon the requests from the medical facilities and started to be clinically used, thus preventing lack of lung ventilators in hospitals in the Czech Republic.
- 590 __
- $a NEINDEXOVÁNO
- 655 _2
- $a časopisecké články $7 D016428
- 700 1_
- $a Roubík, Karel $u Department of Biomedical Technology, Faculty of Biomedical Engineering, Czech Technical University in Prague, Czechia
- 773 0_
- $w MED00210745 $t Measurement. Sensors $x 2665-9174 $g Roč. 22, č. - (2022), s. 100383
- 856 41
- $u https://pubmed.ncbi.nlm.nih.gov/36721675 $y Pubmed
- 910 __
- $a ABA008 $b sig $c sign $y p $z 0
- 990 __
- $a 20230413 $b ABA008
- 991 __
- $a 20230421100147 $b ABA008
- 999 __
- $a ok $b bmc $g 1922888 $s 1189589
- BAS __
- $a 3
- BAS __
- $a PreBMC-PubMed-not-MEDLINE
- BMC __
- $a 2022 $b 22 $c - $d 100383 $e 20220620 $i 2665-9174 $m Measurement. Sensors $n Measur Sens $x MED00210745
- LZP __
- $a Pubmed-20230413
