Glucose sensing on graphite screen-printed electrode modified by sparking of copper nickel alloys
Language English Country Netherlands Media print-electronic
Document type Journal Article
PubMed
28153284
DOI
10.1016/j.talanta.2016.12.064
PII: S0039-9140(16)31013-X
Knihovny.cz E-resources
- Keywords
- Green method, Mixed copper nickel nanoparticles, Non enzymatic glucose sensor, Screen-printed electrodes, Sparked electrodes,
- MeSH
- Biosensing Techniques methods MeSH
- Electrochemical Techniques methods MeSH
- Electrodes * MeSH
- Glucose analysis MeSH
- Graphite chemistry MeSH
- Humans MeSH
- Limit of Detection MeSH
- Copper chemistry MeSH
- Nickel chemistry MeSH
- Check Tag
- Humans MeSH
- Publication type
- Journal Article MeSH
- Names of Substances
- Glucose MeSH
- Graphite MeSH
- Copper MeSH
- nickel copper alloy MeSH Browser
- Nickel MeSH
Electric spark discharge was employed as a green, fast and extremely facile method to modify disposable graphite screen-printed electrodes (SPEs) with copper, nickel and mixed copper/nickel nanoparticles (NPs) in order to be used as nonenzymatic glucose sensors. Direct SPEs-to-metal (copper, nickel or copper/nickel alloys with 25/75, 50/50 and 75/25wt% compositions) sparking at 1.2kV was conducted in the absence of any solutions under ambient conditions. Morphological characterization of the sparked surfaces was performed by scanning electron microscopy, while the chemical composition of the sparked NPs was evaluated with energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy. The performance of the various sparked SPEs towards the electro oxidation of glucose in alkaline media and the critical role of hydroxyl ions were evaluated with cyclic voltammetry and kinetic studies. Results indicated a mixed charge transfer- and hyroxyl ion transport-limited process. Best performing sensors fabricated by Cu/Ni 50/50wt% alloy showed linear response over the concentration range 2-400μM glucose and they were successfully applied to the amperometric determination of glucose in blood. The detection limit (S/N 3) and the relative standard deviation of the method were 0.6µM and <6% (n=5, 2µM glucose), respectively. Newly devised sparked Cu/Ni graphite SPEs enable glucose sensing with distinct advantages over existing glucose chemical sensors in terms of cost, fabrication simplicity, disposability, and adaptation of green methods in sensor's development.
Department of Analytical Chemistry Palacky University 771 46 Olomouc Czech Republic
Department of Chemistry Masaryk University 625 00 Brno Czech Republic
Department of Chemistry University of Ioannina Ioannina 451 10 Greece
Department of Materials Science and Engineering University of Ioannina Ioannina 451 10 Greece
References provided by Crossref.org
