Metals are the backbone of manufacturing owing to their strength and formability. Compared to polymers they have high mass density. There is, however, one exception: magnesium. It has a density of only 1.7 g/cm3, making it the lightest structural material, 4.5 times lighter than steels, 1.7 times lighter than aluminum, and even slightly lighter than carbon fibers. Yet, the widespread use of magnesium is hampered by its intrinsic brittleness. While other metallic alloys have multiple dislocation slip systems, enabling their well-known ductility, the hexagonal lattice of magnesium offers insufficient modes of deformation, rendering it intrinsically brittle. We have developed a quantum-mechanically derived treasure map which screens solid solution combinations with electronic bonding, structure and volume descriptors for similarity to the ductile magnesium-rare earth alloys. Using this insight we synthesized a surprisingly simple, compositionally lean, low-cost and industry-compatible new alloy which is over 4 times more ductile and 40% stronger than pure magnesium. The alloy contains 1 wt.% aluminum and 0.1 wt.% calcium, two inexpensive elements which are compatible with downstream recycling constraints.

Institut für Metallkunde und Metallphysik Kopernikusstr 14 RWTH Aachen University 52074 Aachen Germany

Institute of Physics of Materials Academy of Sciences of the Czech Republic v v i Žižkova 22 Brno 616 62 Czech Republic

Max Planck Institut für Eisenforschung GmbH Max Planck Straβe 1 40237 Düsseldorf Germany

Zobrazit více v PubMed

Bishop JFW, Hill R. A theory of the plastic distortion of a polycrystalline aggregate under combined stresses. Philos Mag. 1951;42:414–427. doi: 10.1080/14786445108561065. DOI

Yoo M. Slip, twinning, and fracture in hexagonal close-packed metals. Metall Trans A. 1981;12:409–418. doi: 10.1007/BF02648537. DOI

Partridge PG. The crystallography and deformation modes of hexagonal close-packed metals. Metall Rev. 1967;118:169–194.

Bohlen J, Letzig D, Kainer KU. New Perspectives for Wrought Magnesium Alloys. Mater Sci Forum. 2007;546–549:1–10. doi: 10.4028/www.scientific.net/MSF.546-549.1. DOI

Couling SL, Pashak JF, Sturkey L. Unique deformation and aging characteristics of certain magnesium-base alloys. Trans ASM. 1959;51:94–107.

Sandlöbes S, Zaefferer S, Schestakow I, Yi S, Gonzalez-Martinez R. On the role of non-basal deformation mechanisms for the ductility of Mg and Mg–Y alloys. Acta Mater. 2011;59:429–439. doi: 10.1016/j.actamat.2010.08.031. DOI

Chino Y, Kado M, Mabuchi M. Enhancement of tensile ductility and stretch formability of magnesium by addition of 0.2 wt%(0.035 at%)Ce. Mater Sci Eng A. 2008;494:343–349. doi: 10.1016/j.msea.2008.04.059. DOI

Chino Y, Kado M, Mabuchi M. Compressive deformation behavior at room temperature – 773 K in Mg–0.2 mass%(0.035at.%)Ce alloy. Acta Mater. 2008;56:387–394. doi: 10.1016/j.actamat.2007.09.036. DOI

Al-Samman T, Li X. Sheet texture modification in magnesium-based alloys by selective rare earth alloying. Mater Sci Eng A. 2011;528:3809–3822. doi: 10.1016/j.msea.2011.01.080. DOI

Hirsch J, Al-Samman T. Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications. Acta Mater. 2013;61:818–843. doi: 10.1016/j.actamat.2012.10.044. DOI

Agnew SR, Yoo MH, Tome CN. Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y. Acta Mater. 2001;49:4277–4289. doi: 10.1016/S1359-6454(01)00297-X. DOI

Sandlöbes S, et al. The relation between ductility and stacking fault energies in Mg and Mg–Y alloys. Acta Mater. 2012;60:3011–3021. doi: 10.1016/j.actamat.2012.02.006. DOI

Sandlöbes S, et al. Ductility improvement of Mg alloys by solid solution: Ab initio modeling, synthesis and mechanical properties. Acta Mater. 2014;70:92–104. doi: 10.1016/j.actamat.2014.02.011. DOI

Agnew SR, Horton JA, Yoo MH. Transmission electron microscopy investigation of <c + a> dislocations in Mg and α-solid solution Mg-Li alloys. Metall Mater Trans A. 2002;33:851–858. doi: 10.1007/s11661-002-0154-x. DOI

Wu Z, Curtin WA. The origins of high hardening and low ductility in magnesium. Nature. 2015;526:62–67. doi: 10.1038/nature15364. PubMed DOI

Nogaret T, Curtin WA, Yasi JA, Hector LG, Jr., Trinkle DR. Atomistic study of edge and screw <c + a> dislocations in magnesium. Acta Mater. 2010;58:4332–4343. doi: 10.1016/j.actamat.2010.04.022. DOI

Pei Z, et al. Rapid theory-guided prototyping of ductile Mg alloys: from binary to multi-component materials. New J Phys. 2015;17 doi: 10.1088/1367-2630/17/9/093009. DOI

Agnew SR, Horton JA, Yoo MH. Transmission electron microscopy investigation of <c + a> dislocations in Mg and α-solid solution Mg-Li alloys. Metall Mater Trans A. 2002;33:851–858. doi: 10.1007/s11661-002-0154-x. DOI

Lentz M, Risse M, Schaefer N, Reimers W, Beyerlein IJ. Strength and ductility with {1011} - {1012} double twinning in a magnesium alloy. Nat Commun. 2016;7 doi: 10.1038/ncomms11068. PubMed DOI PMC

Hantzsche K, Wendt J, Kainer KU, Bohlen J, Letzig D. Mg sheet: the effect of process parameters and alloy composition on texture and mechanical properties. JOM. 2009;61:38–42. doi: 10.1007/s11837-009-0119-2. DOI

Kleiner S, Uggowitzer PJ. Mechanical anisotropy of extruded Mg–6% Al–1% Zn alloy. Mater Sci Eng A. 2004;379:258–263. doi: 10.1016/j.msea.2004.02.020. DOI

Chino Y, et al. Effects of Ca on Tensile Properties and Stretch Formability at Room Temperature in Mg-Zn and Mg-Al Alloys. Mater Trans. 2011;52:1477–1482. doi: 10.2320/matertrans.M2011048. DOI

Chino Y, Huang X, Suzuki K, Mabuchi M. Enhancement of Stretch Formability at Room Temperature by Addition of Ca in Mg-Zn Alloy. Mater Trans. 2010;51:818–821. doi: 10.2320/matertrans.M2009385. DOI

Agnew SR, Horton JA, Lillo TM, Brown DW. Enhanced ductility in strongly textured magnesium produced by equal channel angular processing. Scripta Mater. 2004;50:377–381. doi: 10.1016/j.scriptamat.2003.10.006. DOI

Tomlinson P, Azizi-Alizamini H, Poole WJ, Sinclair CW, Gharghouri MA. Bi-axial deformation of the magnesium alloy AZ80. Metall Mater Trans A. 2013;44:2970–2983. doi: 10.1007/s11661-013-1707-x. DOI

Beausir B, Biswas S, Kim D, Toth L, Suwas S. Analysis of microstructure and texture evolution in pure magnesium during symmetric and asymmetric rolling. Acta Mater. 2009;57:5061–5077. doi: 10.1016/j.actamat.2009.07.008. DOI

Kim WJ, Jeong HG, Jeong HT. Achieving high strength and high ductility in magnesium alloys using severe plastic deformation combined with low-temperature aging. Scripta Mater. 2009;61:1040–1043. doi: 10.1016/j.scriptamat.2009.08.020. DOI

Huang X, Suzuki K, Chino Y, Mabuchi M. Improvement of stretch formability of Mg-3Al-1Zn alloy sheet by high temperature rolling at finishing pass. J Alloy Compd. 2011;509:7579–7584. doi: 10.1016/j.jallcom.2011.04.132. DOI

Nie J-F. Precipitation and Hardening in Magnesium Alloys. Metall Mater Trans A. 2012;43:3891–3939. doi: 10.1007/s11661-012-1217-2. DOI

Robson JD, Stanford N, Barnett MR. Effect of Precipitate Shape and Habit on Mechanical Asymmetry in Magnesium Alloys. Metall Mater Trans A. 2013;44:2984–2995. doi: 10.1007/s11661-012-1466-0. DOI

Jain J, Cizek P, Poole WJ, Barnett MR. Precipitate characteristics and their effect on the prismatic-slip-dominated deformation behaviour of an Mg–6 Zn alloy. Acta Mater. 2013;61:4091–4102. doi: 10.1016/j.actamat.2013.03.033. DOI

Yoo MH, Morris JR, Ho KM, Agnew SR. Nonbasal deformation modes of HCP metals and alloys: Role of dislocation source and mobility. Metall and Mat Trans A. 2002;33:813–822. doi: 10.1007/s11661-002-0150-1. DOI

Agnew SR, Capolungo L, Calhoun CA. Connections between the basal I1 “growth” fault and <c + a> dislocations. Acta Mater. 2015;82:255–265. doi: 10.1016/j.actamat.2014.07.056. DOI

Pan H, et al. Recent developments in rare-earth free wrought magnesium alloys having high strength: A review. J Alloys Compds. 2016;663:321–331. doi: 10.1016/j.jallcom.2015.12.057. DOI

Hase T, Ohtagaki T, Yamaguchi M, Ikeo N, Mukai T. Effect of aluminum or zinc solute addition on enhancing impact fracture toughness in Mg–Ca alloys. Acta Mater. 2016;104:283–294. doi: 10.1016/j.actamat.2015.11.045. DOI

Zeng ZR, et al. Effects of dilute additions of Zn and Ca on ductility of magnesium alloy sheet. Mater Sci Eng A. 2016;674:459–471. doi: 10.1016/j.msea.2016.07.049. DOI

Suh B-C, Kim JH, Hwang JH, Shim M-S, Kim NJ. Twinning-mediated formability in Mg alloys. Scientific Reports. 2016;6 doi: 10.1038/srep22364. PubMed DOI PMC

Nakata T, et al. Improving tensile properties of dilute Mg-0.27Al-0.13Ca-0.21Mn (at.%) alloy by low temperature high speed extrusion. J Alloy Compd. 2015;648:428–437. doi: 10.1016/j.jallcom.2015.07.051. DOI

Yang Z, Li JP, Zhang JX, Lorimer GW, Robson J. Review on Research and Development of Magnesium Alloys. Acta Metall. Sin. (Engl. Lett.) 2008;21:313–328. doi: 10.1016/S1006-7191(08)60054-X. DOI

Meza García, E. Extrusion of Magnesium-Zinc based alloys, Südwestdeutscher Verlag für Hochschulschriften, ISBN-13: 978-383812478 (13. April 2011).

Akhtar A, Teghtsoonian E. Solid solution strengthening of Magnesium single crystals-I Alloying behavior in basal slip. Acta Metall. 1969;17:1339–1349. doi: 10.1016/0001-6160(69)90151-5. DOI

Akhtar A, Teghtsoonian E. Solid solution strengthening of Magnesium single crystals-II The effect of solute on the ease of prismatic slip. Acta Metall. 1969;17:1351–1356. doi: 10.1016/0001-6160(69)90152-7. DOI

Stanford, N. Barnett, M.R., Effect of Zn concentration and grain size on prismatic slip in Mg-Zn binary alloys, Magnesium technology 2012: Proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of The Minerals, Metals & Materials Society (TMS), 207–211, TMS, Orlando (2012).

Cáceres CH, Blake AH. Solute and Temperature Effects on the Strain Hardening Behaviour of Mg-Zn Solid Solution. Mater Sci Forum. 2008;567–568:45–50. doi: 10.4028/www.scientific.net/MSF.567-568.45. DOI

Blake AH, Cáceres CH. Solid-solution hardening and softening in Mg-Zn alloys. Mater Sci Eng A. 2008;483–484:161–163. doi: 10.1016/j.msea.2006.10.205. DOI

Hamad K, Ko YG. A cross-shear deformation for optimizing the strength and ductility of AZ31 magnesium alloys. Scientific Reports. 2016;6 doi: 10.1038/srep29954. PubMed DOI PMC

Yamashita A, Horita Z, Langdon TG. Improving the mechanical properties of magnesium and a magnesium alloy through severe plastic deformation. Mater Sci Eng A. 2001;300:142–147. doi: 10.1016/S0921-5093(00)01660-9. DOI

Miao Q, Hu L-X, Sun H-F, Wang E-D. Grain refining and property improvement of AZ31 Mg alloy by hot rolling. Trans Nonferrous Met Soc China. 2009;19:326–330. doi: 10.1016/S1003-6326(10)60063-5. DOI

Kim WJ, et al. Texture development and its effect on mechanical properties of an AZ61 mg alloy fabricated by equal channel angular pressing. Acta Mater. 2003;51:3293–3307. doi: 10.1016/S1359-6454(03)00161-7. DOI

Barnett M. Twinning and the ductility of magnesium alloys: Part I: “Tension” twins. Mater Sci Eng A. 2007;464:1–7. doi: 10.1016/j.msea.2006.12.037. DOI

Koike J, Ohyama R. Geometrical criterion for the activation of prismatic slip in AZ61 Mg alloy sheets deformed at room temperature. Acta Mater. 2005;53:1963–1972. doi: 10.1016/j.actamat.2005.01.008. DOI

Wang H–Y, et al. Achieving high strength and high ductility in magnesium alloy using hard-plate rolling (HPR) process. Scientific Reports. 2015;5 doi: 10.1038/srep17100. PubMed DOI PMC

Huang X, Suzuki K, Watazu A, Shigematsu I, Saito N. Improvement of formability of Mg-Al-Zn alloy sheet at low temperatures using differential speed rolling. J Alloy Compd. 2009;470:263–268. doi: 10.1016/j.jallcom.2008.02.029. DOI

Yuan G, Sun Y, Ding W. Effects of Sb addition on the microstructure and mechanical properties of AZ91 magnesium alloy. Scripta Mater. 2000;43:1009–1013. doi: 10.1016/S1359-6462(00)00528-5. DOI

Tonga LB, et al. Microstructure and mechanical properties of Mg–Zn–Ca alloy processed by equal channel angular pressing. Mater Sci Eng A. 2009;523:289–294. doi: 10.1016/j.msea.2009.06.021. DOI

del Valle JA, Carreño F, Ruano OA. Influence of texture and grain size on work hardening and ductility in magnesium based alloys processed by ECAP and rolling. Acta Mater. 2006;54:4247–4259. doi: 10.1016/j.actamat.2006.05.018. DOI

Wang YN, Huang JC. The role of twinning and untwining in yielding behavior in hot-extruded Mg-Al-Zn alloy. Acta Mater. 2007;55:897–905. doi: 10.1016/j.actamat.2006.09.010. DOI

Zhang J, et al. Effect of yttrium-rich misch metal on the microstructures, mechanical properties and corrosion behavior of die cast AZ91 alloy. J Alloy Compd. 2009;471:322–330. doi: 10.1016/j.jallcom.2008.03.089. DOI

Kim HL, Bang WK, Chang YW. Deformation behavior of as-rolled and strip-cast AZ31 magnesium alloy sheets. Mater Sci Eng A. 2011;528:5356–5365. doi: 10.1016/j.msea.2011.03.068. DOI

Zhang J, Yu Q, Jiang Y, Li Q. An experimental study of cyclic deformation of extruded AZ61A magnesium alloy. Int J Plast. 2011;27:768–787. doi: 10.1016/j.ijplas.2010.09.004. DOI

Yang Q, Yu Z, Dai Q, Dong H, Jiang B. Effect of multipass bending deformation on microstructure evolution and mechanical properties of AZ31 alloy sheet. Mat Res. 2016;19:322–327. doi: 10.1590/1980-5373-MR-2015-0233. DOI

Sasaki TT, Yamamoto K, Honma T, Kamado S, Hono K. A high-strength Mg-Sn-Zn-Al alloy extruded at low temperature. Scripta Mater. 2008;59:1111–1114. doi: 10.1016/j.scriptamat.2008.07.042. DOI

Wenwen D, et al. Microstructure and mechanical properties of Mg-Al based alloy with calcium and rare earth additions. Mater Sci Eng A. 2003;356:1–7. doi: 10.1016/S0921-5093(02)00551-8. DOI

Sandlöbes S, Friák M, Neugebauer J, Raabe D. Basal and non-basal dislocation slip in Mg–Y. Mater Sci Eng A. 2014;576:61–68. doi: 10.1016/j.msea.2013.03.006. DOI