The antifouling, antimicrobial, elution behavior, skin irritant, and cytotoxicity properties of water-soluble phosphate glass on stainless steel were evaluated. Water-soluble phosphate glass samples with 35% Cu (mol/mol) were prepared by altering the network modifier (Na2O, K2O) and network former (P2O5, B2O3) compositions. The materials were melted at temperatures within the range of 850-950 °C. The melt was then quenched and ground into fine particles using a twin roll mill. The resulting water-soluble glasses were prepared as glass frit (size < 100 μm) using a sieve. The amorphous phase was determined by X-ray diffraction and differential thermal analysis. Water-soluble glasses with a reduced Cu ion elution rate of 1.2 ppm per week were formed because the chemical resistances of the formulated glasses improved as the P2O5 content decreased and the B2O3 content increased. To test its antifouling properties, the glass frit was mixed with paint and coated onto a STS316L sheet. The surface roughness was increased markedly from 1.4 to 19.2 nm, increasing the specific surface area for antimicrobial activity. It was demonstrated that the proposed method was able to form noncytotoxic, nonirritant, water-soluble glasses with 99.9% antimicrobial activity against Staphylococcus aureus. These results suggest that water-soluble phosphate glass on STS316L sheets could be useful in filtration plants.

Department of Civil Engineering Hongik University Seoul 04066 Republic of Korea

GS Engineering and Construction Gran Seoul Jong ro Jongno gu Seoul 03159 Republic of Korea

Zobrazit více v PubMed

Appl Microbiol Biotechnol. 2016 Jun;100(11):4845-63 PubMed

Biomaterials. 2005 May;26(15):2247-54 PubMed

Appl Microbiol Biotechnol. 2016 Jul;100(13):5849-58 PubMed

Int J Pharm. 2010 Mar 15;387(1-2):184-6 PubMed

Appl Microbiol Biotechnol. 2017 Apr;101(7):2801-2809 PubMed

Microbiol Immunol. 1999;43(5):481-4 PubMed

Appl Microbiol Biotechnol. 2016 Jan;100(2):571-81 PubMed

ACS Appl Mater Interfaces. 2014 Jan 22;6(2):861-73 PubMed

Appl Microbiol Biotechnol. 2013 Jan;97(2):859-69 PubMed

Am J Infect Control. 2012 Nov;40(9):854-9 PubMed

Environ Sci Technol. 2015 Jan 20;49(2):708-20 PubMed

Appl Microbiol Biotechnol. 2016 Apr;100(8):3757-66 PubMed

Int J Antimicrob Agents. 2009 Jun;33(6):587-90 PubMed

Nat Rev Microbiol. 2013 Jul;11(7):443-54 PubMed

AAPS PharmSciTech. 2016 Apr;17(2):482-92 PubMed

J Mater Sci Mater Med. 2010 Oct;21(10):2861-8 PubMed