In this article, an improved variant of the cuckoo search (CS) algorithm named Coevolutionary Host-Parasite (CHP) is used for maximizing the metal removal rate in a turning process. The spindle speed, feed rate and depth of cut are considered as the independent parameters that describe the metal removal rate during the turning operation. A data-driven second-order polynomial regression approach is used for this purpose. The training dataset is designed using an L16 orthogonal array. The CHP algorithm is effective in quickly locating the global optima. Furthermore, CHP is seen to be sufficiently robust in the sense that it is able to identify the optima on independent reruns. The CHP predicted optimal solution presents ±10% deviations in the optimal process parameters, which shows the robustness of the optimal solution.

Department of Electrical and Electronics Engineering Sikkim Manipal Institute of Technology Sikkim Manipal University Majhitar 737 136 India

Department of Mechanical Engineering Sikkim Manipal Institute of Technology Sikkim Manipal University Majhitar 737 136 India

Department of Mechanical Engineering Vel Tech Rangarajan Dr Sagunthala R and D Institute of Science and Technology Avadi 600 062 India

VSB TU Ostrava Faculty of Mechanical Engineering 17 listopadu 2172 15 708 00 Ostrava Czech Republic

Zobrazit více v PubMed

Das P.P., Gupta P., Ghadai R.K., Ramachandran M., Kalita K. Optimization of turning process parameters by taguchi-based six sigma. Mech. Mech. Eng. 2017;21:649–656.

Santhanakrishnan M., Sivasakthivel P.S., Sudhakaran R. Modeling of geometrical and machining parameters on temperature rise while machining Al 6351 using response surface methodology and genetic algorithm. J. Braz. Soc. Mech. Sci. Eng. 2017;39:487–496. doi: 10.1007/s40430-015-0378-5. DOI

Suresh P., Venkatesan R., Sekar T., Elango N., Sathiyamoorthy V. Optimization of intervening variables in Micro EDM of Ss 316L using a genetic algorithm and response-surface methodology. Stroj. Vestn. J. Mech. Eng. 2014;60:656–664. doi: 10.5545/sv-jme.2014.1665. DOI

Prabhu S., Vinayagam B.K. Optimization of carbon nanotube-based electrical discharge machining parameters using full factorial design and genetic algorithm. Aust. J. Mech. Eng. 2016;14:161–173. doi: 10.1080/14484846.2015.1093221. DOI

Ghadai R.K., Kalita K., Gao X.Z. Symbolic regression metamodel based multi-response optimization of EDM process. Fme Trans. 2020;48:405. doi: 10.5937/fme2002404G. DOI

Behera R.R., Ghadai R.K., Kalita K., Banerjee S. Simultaneous prediction of delamination and surface roughness in drilling GFRP composite using ANN. Int. J. Plast. Technol. 2016;20:424–450. doi: 10.1007/s12588-016-9163-2. DOI

Cus F., Balic J., Zuperl U. Hybrid ANFIS-ants system based optimization of turning parameters. J. Achiev. Mater. Manuf. Eng. 2009;36:79–86.

Ning J., Liang S.Y. Inverse identification of Johnson-Cook material constants based on modified chip formation model and iterative gradient search using temperature and force measurements. Int. J. Adv. Manuf. Technol. 2019;102:2865–2876. doi: 10.1007/s00170-019-03286-0. DOI

Ning J., Nguyen V., Huang Y., Hartwig K.T., Liang S.Y. Inverse determination of Johnson–Cook model constants of ultra-fine-grained titanium based on chip formation model and iterative gradient search. Int. J. Adv. Manuf. Technol. 2018;99:1131–1140. doi: 10.1007/s00170-018-2508-6. DOI

Zuo K.T., Chen L.P., Zhang Y.Q., Yang J. Manufacturing-and machining-based topology optimization. Int. J. Adv. Manuf. Technol. 2006;27:531–536. doi: 10.1007/s00170-004-2210-8. DOI

Kilickap E., Huseyinoglu M. Selection of optimum drilling parameters on Burr Height using response surface methodology and genetic algorithm in drilling of AISI 304 stainless steel. Mater. Manuf. Process. 2010;25:1068–1076. doi: 10.1080/10426911003720854. DOI

Kilickap E., Huseyinoglu M., Yardimeden A. Optimization of drilling parameters on surface roughness in drilling of Aisi 1045 using response surface methodology and genetic algorithm. Int. J. Adv. Manuf. Technol. 2011;52:79–88. doi: 10.1007/s00170-010-2710-7. DOI

Kalita K., Shivakoti I., Ghadai R.K. Optimizing process parameters for Laser Beam Micro-Marking using genetic algorithm and particle swarm optimization. Mater. Manuf. Process. 2017;32:1101–1108. doi: 10.1080/10426914.2017.1303156. DOI

Kalita K., Mallick P.K., Bhoi A.K., Ghadai R. Optimizing drilling induced delamination in GFRP composites using genetic algorithm & particle swarm optimisation. Adv. Compos. Lett. 2018;27:1–9.

Saidi R., Fathallah B.B., Mabrouki T., Belhadi S., Yallese M.A. Modeling and optimization of the turning parameters of cobalt alloy (Stellite 6) based on RSM and desirability function. Int. J. Adv. Manuf. Technol. 2019;100:2945–2968. doi: 10.1007/s00170-018-2816-x. DOI

Mia M., Królczyk G., Maruda R., Wojciechowski S. Intelligent optimization of hard-turning parameters using evolutionary algorithms for smart manufacturing. Materials. 2019;12:879. doi: 10.3390/ma12060879. PubMed DOI PMC

Warsi S.S., Agha M.H., Ahmad R., Jaffery S.H.I., Khan M. Sustainable turning using multi-objective optimization: A study of Al 6061 T6 at high cutting speeds. Int. J. Adv. Manuf. Technol. 2019;100:843–855. doi: 10.1007/s00170-018-2759-2. DOI

Mia M., Dhar N.R. Prediction and optimization by using SVR, RSM and GA in hard turning of tempered AISI 1060 steel under effective cooling condition. Neural Comput. Appl. 2019;31:2349–2370. doi: 10.1007/s00521-017-3192-4. DOI

Laouissi A., Yallese M.A., Belbah A., Belhadi S., Haddad A. Investigation, modeling, and optimization of cutting parameters in turning of gray cast iron using coated and uncoated silicon nitride ceramic tools. Based on ANN, RSM, and GA optimization. Int. J. Adv. Manuf. Technol. 2019;101:523–548. doi: 10.1007/s00170-018-2931-8. DOI

Kalita K., Nasre P., Dey P., Haldar S. Metamodel based multi-objective design optimization of laminated composite plates. Struct. Eng. Mech. 2018;67:301–310.

Ragavendran U., Ghadai R.K., Bhoi A., Ramachandran M., Kalita K. Sensitivity analysis and optimization of EDM process parameters. Trans. Can. Soc. Mech. Eng. 2018;43:13–25. doi: 10.1139/tcsme-2018-0021. DOI

Yang X.-S., Deb S. Cuckoo search via Levy flights; Proceedings of the 2009 World Congress on Nature & Biologically Inspired Computing (NaBIC); Coimbatore, India. 9–11 December 2009; Piscataway, NJ, USA: IEEE; 2009. pp. 210–214. DOI

Mishra S.K. Global optimization of some difficult benchmark functions by host-parasite coevolutionary algorithm. Econ. Bull. 2013;33:1–18.

Kalita K., Dey P., Haldar S., Gao X.Z. Optimizing frequencies of skew composite laminates with metaheuristic algorithms. Eng. Comput. 2020;36:741–761. doi: 10.1007/s00366-019-00728-x. DOI

Bártol I., Karcza Z., Moskát C., Røskaft E., Kisbenedek T. Responses of great reed warblers Acrocephalus arundinaceus to experimental brood parasitism: The effects of a cuckoo Cuculus canorus dummy and egg mimicry. J. Avian Biol. 2002;33:420–425. doi: 10.1034/j.1600-048X.2002.02945.x. DOI

Kalita K., Dey P., Haldar S. Search for accurate RSM metamodels for structural engineering. J. Reinf. Plast. Compos. 2019;38:995–1013. doi: 10.1177/0731684419862346. DOI

Ghadai R.K., Kalita K., Mondal S.C., Swain B.P. PECVD process parameter optimization: Towards increased hardness of diamond-like carbon thin films. Mater. Manuf. Process. 2018;33:1905–1913. doi: 10.1080/10426914.2018.1512114. DOI

Tibadia R., Patwardhan K., Shah D., Shinde D., Chaudhari R., Kalita K. Experimental investigation on hole quality in drilling of composite pipes. Trans. Can. Soc. Mech. Eng. 2018;42:147–155. doi: 10.1139/tcsme-2017-0045. DOI