Nanofibrous materials are used in drug delivery as carriers of active ingredients. These can be incorporated into the materials with various electrospinning methods that differ mainly in the way spinning solutions are prepared. Each method affects primarily the encapsulation efficiency and distribution of active ingredients in the materials. This study focuses on the incorporation of octenidine dihydrochloride (OCT) and triclosan (TRI) into nanofibrous materials electrospun from native hyaluronic acid emulsions, dispersions, and blends. OCT had no substantial effect on fiber morphology, which is affected by the solvent system. All OCT encapsulation efficiencies were comparable (approximately 90%). TRI encapsulation efficiencies varied greatly depending on the method used. Merely 3% of TRI was encapsulated when it was spun from a dispersion. Encapsulation efficiency was higher, and TRI was incorporated in clusters when an emulsion was used. The best result was achieved with a blend, in which case 96% of TRI was encapsulated.

Contipro a s Dolní Dobrouč 401 Czech Republic

Contipro a s Dolní Dobrouč 401 Czech Republic; Nanotechnology Centre Centre for Energy and Environmental Technologies VŠB Technical University of Ostrava 17 listopadu 2172 15 708 00 Ostrava Czech Republic

Nanotechnology Centre Centre for Energy and Environmental Technologies VŠB Technical University of Ostrava 17 listopadu 2172 15 708 00 Ostrava Czech Republic

Citace poskytuje Crossref.org

Trends in the Incorporation of Antiseptics into Natural Polymer-Based Nanofibrous Mats