Designing orthopaedic seat cushion made of rattan using quality function deployment approach
Status PubMed-not-MEDLINE Language English Country India Media electronic-ecollection
Document type Journal Article
PubMed
39529904
PubMed Central
PMC11550209
DOI
10.1016/j.jcot.2024.102771
PII: S0976-5662(24)00440-5
Knihovny.cz E-resources
- Keywords
- Anthropometry, Orthopaedic chair, Product design, Quality function deployment, Rattan,
- Publication type
- Journal Article MeSH
Using ergonomic orthopaedic chairs can address spinal issues, particularly HNP, due to their flexible and elastic properties. By achieving optimal ergonomic design, various positive aspects can be achieved, such as increasing work quality productivity and reducing the cost of injuries or accidents. This research demonstrates diverse product design approaches to enhance posture health ergonomics, address specific musculoskeletal disorder issues, and consider local needs and available materials. Rattan is a tropical vine widely used in the furniture industry and predominantly found in wooded areas such as Indonesia. This research combines market research, morphology, ergonomic study, concept selection, QFD, HoQ, stiffness test, and prototype review. The QFD method was chosen in this study due to its excellence in connecting consumer desires with the product development process. Data of respondents consist of 51 % of respondents were male, 49 % were female, 88 % were aged between 18 and 34 years old, and 10 % were aged between 35 and 54 years old. The approach of 6 stages of product design as the primary framework for developing our product such as: planning, concept development (concept screening, product morphology, concept selection), system-level design, detailed design, testing, refinement and launching. Based on the calculations using the HOQ, it is identified that the primary focus in designing the rattan-based orthopaedic seating, lies in the orthopaedic design that provides maximum comfort for the spine. The comparison results indicate that the stiffness level of rattan weaving is nearly like latex, with a similarity percentage of 89 %. Data analysis using the QFD method indicates that the primary priority aspect is the orthopaedic design, followed by the selection of quality materials, cost-effectiveness, versatility, and appealing design aspects. Rattan's superior air circulation provides comfort by preventing excessive heat accumulation, excellence in strength and durability, ensuring ease of lightweight modelling, and providing more sustainable material.
Department of Industrial Engineering Parahyangan University Bandung Indonesia
Department of Informatics Universitas Tarumanagara Jakarta Indonesia
Department of Law Universitas Tarumanagara Jakarta Indonesia
Faculty of Health and Life Science INTI International University Nilai Malaysia
Industrial Engineering Department Universitas Tarumanagara Jakarta Indonesia
Razak Faculty of Technology and Informatics Universiti Teknologi Malaysia Kuala Lumpur Malaysia
See more in PubMed
Wardana I.W., Prayogi A.R.I.Y., Haqi D.N., Dwiyanti E. Analysis of individual and occupational factors with complaints of musculoskeletal disorders in swallow nest cleaning. The Indonesian Journal of Occupational Safety and Health. 2023;12(1):104–114.
Ibrahim S.H.A. Study of lower back pain using magnetic resonance imaging. Sudan university of science and technology. Sudan. 2022. DOI
Carvil P.A.T. King's College London; London. UK: 2017. Axial Loading as a Countermeasure to Microgravity-Induced Deconditioning: Effects on the Spine and its Associated Structures.
Pratono A.H. Cross-cultural collaboration for inclusive global value chain: a case study of rattan industry. Int J Emerg Mark. 2020;15(1):149–170. doi: 10.1108/IJOEM-01-2017-0028. DOI
Naumova K.A., Epishev V.V., Németh Zs, et al. An orthopaedic chair with active sitting function (A prospective project) Rehabilitation and Sport Medicine. 2022 doi: 10.14529/hsm22s114. DOI
Jabeen R., Hussain N. Teachers' awareness and practices on school ergonomics in Karachi, Pakistan. Journal of Humanities, Social and Management Sciences (JHSMS) 2022;3(1):366–381. doi: 10.47264/idea.jhsms/3.1.26. DOI
Becker D.A. 2021. Beyond Nature and Health: Do the Benefits of Nature Extend from Health to Healthcare Spending and Opioid-Related Mortality? (Doctoral Dissertation, University of Illinois Urbana-Champaign, IL, United States)
Irimie S.I., Irimie S. Ergonomy and the ergonomist. Historical and current references. Acta technica napocensis-Series: Applied mathematics, Mechanics, and Engineering. 2021;64(1-S1)
Gozali L., Valentino L., Richard T., Marchello D. 2023 IEEE 17th International Conference on Industrial and Information Systems (ICIIS) IEEE; 2023, August. System modelling and simulation to improve laundry business productivity; pp. 1–6.
Joes S., De Candra C., Larsen H., et al. Proceedings of the International Conference on Industrial Engineering and Operations Management. 2021, March. The design development of an ergonomic public trash bin for COVID-19 medical mask waste; pp. 7–9. Singapore.
Dianat I., Molenbroek J., Castellucci H.I. A review of the methodology and applications of Anthropometry in ergonomics and product design. Ergonomics. 2018;61(12):1696–1720. doi: 10.1080/00140139.2018.1502817. PubMed DOI
Norton K.I. Standards for anthropometry assessment. Kinanthropometry and Exercise Physiology. 2018;4:68–137. doi: 10.25954/qspx-we45. DOI
Beck K.L., Jones B., Ullah I., McNaughton S.A., Haslett S.J., Stonehouse W. Associations between dietary patterns, socio-demographic factors and anthropometric measurements in adult New Zealanders: an analysis of data from the 2008/09 New Zealand Adult Nutrition Survey. Eur J Nutr. 2018;57:1421–1433. doi: 10.1007/s00394-017-1421-3. PubMed DOI
Mahajer A., Compas J., Tolchin R.B. 2017. Acute Lumbar Radiculopathy; pp. 419–431. DOI
Rejil C. 2023. Preliminary Analysis of Floristic Diversity in Selected Wards of Cheranelloor Panchayat. [Doctoral dissertation, St. Teresa's College (Autonomous), Ernakulam]
Gu Y., Zhang J. Tensile properties of natural and synthetic rattan strips used as furniture woven materials. Forests. 2020;11(12):1299. doi: 10.3390/f11121299. DOI
Mustafa A.A., Derise M.R., Yong W.T.L., Rodrigues K.F. A concise review of Dendrocalamus asper and related bamboos: germplasm conservation, propagation and molecular biology. Plants. 2021;10(9):1897. doi: 10.3390/plants10091897. PubMed DOI PMC
Erkol Y.A. Doctoral dissertation, Technische Universitaet Berlin); 2021. Bamboo: A Socio-Material Approach to Past and Present Bamboo Cultures. DOI
Bahia T.H.A., Idan A.R., Athab K.R. The effect of quality function deployment (QFD) in enhancing customer satisfaction. International Journal of Professional Business Review. 2023;8(1) doi: 10.26668/businessreview/2023.v8i1.1156. DOI
Fargnoli M., Sakao T. Uncovering differences and similarities among quality function deployment-based methods in Design for X: benchmarking in different domains. Qual Eng. 2017;29(4):690–712. doi: 10.1080/08982112.2016.1253849. DOI
Eryürük Ş., Kürüm Varolgüneş F., Varolgüneş S. Assessment of stakeholder satisfaction as additive to improve building design quality: AHP-based approach. J Hous Built Environ. 2022;37(1):505–528.
Serugga J., Kagioglou M., Tzortzopoulos P. Value generation in front-end design of social housing with QFD and multiattribute utility theory. J Construct Eng Manag. 2020;146(4) doi: 10.1061/(ASCE)CO.1943-7862.0001787. DOI
Sjödin D., Parida V., Jovanovic M., Visnjic I. Value creation and value capture alignment in business model innovation: a process view on outcome‐based business models. J Prod Innovat Manag. 2020;37(2)
Slattery P., Saeri A.K., Bragge P. Research co-design in health: a rapid overview of reviews. Health Res Pol Syst. 2020;18(1):1–13. doi: 10.1186/s12961-020-0528-9. PubMed DOI PMC
Hartono M., Jaya B.K., Prianka D., Parung C.A.P., Viviany V. Awareness of 3D body-scanning and prospective update of Indonesian anthropometry for virtual fashion design. Journal Teknik Industri.Universitas Diponegoro: 2023;18(1):1–11. doi: 10.14710/jati.18.1.1-11. DOI
Smith J.D., Johnson A.B. The impact of ergonomic design on orthopaedic chair effectiveness. Journal of Orthopaedic Engineering. 2020;12(3):45–58.
Khansari S., Movahed Mohammadi Z.S. Malawi. Politecnico di Milano; Milan. Italy: 2022. Life Around Circles. Passive Design Strategies for a Secondary School in Benga.
Gozali L., Rafael G., De Candra C., Masrom M., Gunadi A., Zagloel T.Y.M. 2022 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) IEEE; 2022, December. Smart wristwatch and apps for healthy people with congenital diseases and a healthy lifestyle; pp. 722–726.
Karwowski W., Zhang W. In: Handbook of Human Factors and Ergonomics. Salvendy G., Karwowski W., editors. Wiley; Hoboken, New Jersey, United States: 2021. The discipline of human factors and ergonomics; pp. 1–37. DOI
Ginting R., Ishak A., Malik A.F., Satrio M.R. Vol. 1003. IOP Publishing; 2020. Product development with quality function deployment (QFD): a literature review. (IOP Conference Series: Materials Science and Engineering). 1. DOI
Shahar F.S., Sultan M.T.H., Md Shah A.U., Safri S.N.A. Natural fibre for prosthetic and orthotic applications—a review. Structural Health Monitoring System for Synthetic. Hybrid and Natural Fiber Composites. 2021:51–70. doi: 10.1007/978-981-15-8840-2_5. DOI
Kelechi K.D., Ndubuka G.I., Onwukamuche K.C., et al. Biomechanical properties of rattan cane in the design and fabrication of prosthetic foot. Asian Journal of Applied Sciences (ISSN: 2321–0893) 2020;8(6) doi: 10.24203/ajas.v8i6.6285. DOI
Santoso G., Sugiharto S., Mughni A., Ammarullah M.I., Bayuseno A.P., Jamari J. Chairless chairs for orthopaedic surgery purpose–A literature review. Open Access Macedonian Journal of Medical Sciences. 2022;10(F):146–152. doi: 10.3889/oamjms.2022.8148. DOI
Moon M.S., Lee H., Kim S.T., Kim S.J., Kim M.S., Kim D.S. Spinopelvic Orientation on radiographs in various body postures: upright standing, chair sitting, Japanese style kneel sitting, and Korean style cross-legged sitting. Clinics in Orthopaedic surgery. 2018;10(3):322–327. doi: 10.4055/2Fcios.2018.10.3.322. PubMed DOI PMC
Aminy R., Kusuma P.A., Rasyidi C.N., Purwaningrum L. Vol. 2674. AIP Publishing; 2023. Rattan as an alternative material for elementary school furniture to support active learning. (AIP Conference Proceedings). 1. DOI
Agwata J.R. Doctoral dissertation, University of Nairobi; Nairobi, Kenya: 2015. Knowledge, Attitudes and Practice of Traditional Bone Setting in Iftin Division, Garissa.
Aprillita M., Atmodjo C., Kartawijaya M., et al. An ergonomic approach to design restaurant dinning table during the covid-19 pandemic for Indonesian society. Eye. 2021;60(78.1) 95-28.
Chatpakan C. Mahidol University; Thailnd: 2022. Competitiveness of Furniture between Import and Production in Thailand.
Dotoli M., Epicoco N., Falagario M. Multi-Criteria Decision Making techniques for the management of public procurement tenders: a case study. Appl Soft Comput. 2020;88
Egoh A., Reed K.S., Kalu P.N. A review of the current status of bamboo usage with special emphasis on orthopedic rehabilitation. Mater Sci Appl. 2020;11(7):415.
Fakhoury J., Dowling T.J. StatPearls Publishing, Treasure Island; Florida. USA: 2023. Cervical Degenerative Disc Disease. StatPearls. PubMed
Fraix M., Badran S., Graham V., et al. Osteopathic manipulative treatment in individuals with vertigo and somatic dysfunction: a randomized, controlled, comparative feasibility study. J Osteopath Med. 2020;121(1):71–83. doi: 10.7556/jaoa.2020.147. PubMed DOI
Lehto X.Y., Lehto M.R. Vacation as a public health resource: toward a wellness-centered tourism design approach. J Hospit Tourism Res. 2019;43(7):935–960. doi: 10.1177/1096348019849684. DOI