• Je něco špatně v tomto záznamu ?

Towards near-permanent CoCrMo prosthesis surface by combining micro-texturing and low temperature plasma carburising

Y. Dong, P. Svoboda, M. Vrbka, D. Kostal, F. Urban, J. Cizek, P. Roupcova, H. Dong, I. Krupka, M. Hartl,

. 2015 ; 55 (-) : 215-27. [pub] 20151101

Jazyk angličtina Země Nizozemsko

Typ dokumentu časopisecké články, práce podpořená grantem

Perzistentní odkaz   https://www.medvik.cz/link/bmc16027929

An advanced surface engineering process combining micro-texture with a plasma carburising process was produced on CoCrMo femoral head, and their tribological properties were evaluated by the cutting-edge pendulum hip joint simulator coupled with thin film colorimetric interferometry. FESEM and GDOES showed that precipitation-free C S-phase with a uniform case depth of 10μm was formed across the micro-textures after duplex treatment. Hip simulator tests showed that the friction coefficient was reduced by 20% for micro-metre sized texture, and the long-term tribological property of microtexture was enhanced by the C-supersaturated crystalline microstructure formed on the surface of duplex treated CoCrMo, thereby enhancing biotribological durability significantly. In-situ colorimetric interferometry confirmed that the maximum film thickness around texture area was 530nm, indicating that the additional lubricant during sliding motion might provide exceptional bearing life.

Citace poskytuje Crossref.org

000      
00000naa a2200000 a 4500
001      
bmc16027929
003      
CZ-PrNML
005      
20170117102849.0
007      
ta
008      
161005s2015 ne f 000 0|eng||
009      
AR
024    7_
$a 10.1016/j.jmbbm.2015.10.023 $2 doi
024    7_
$a 10.1016/j.jmbbm.2015.10.023 $2 doi
035    __
$a (PubMed)26594781
040    __
$a ABA008 $b cze $d ABA008 $e AACR2
041    0_
$a eng
044    __
$a ne
100    1_
$a Dong, Yangchun $u Faculty of Mechanical Engineering, Brno University of Technology, Brno 616 69, Czech Republic; Central European Institute of Technology (CEITEC), Brno 602 00, Czech Republic. Electronic address: yangchun.dg@gmail.com.
245    10
$a Towards near-permanent CoCrMo prosthesis surface by combining micro-texturing and low temperature plasma carburising / $c Y. Dong, P. Svoboda, M. Vrbka, D. Kostal, F. Urban, J. Cizek, P. Roupcova, H. Dong, I. Krupka, M. Hartl,
520    9_
$a An advanced surface engineering process combining micro-texture with a plasma carburising process was produced on CoCrMo femoral head, and their tribological properties were evaluated by the cutting-edge pendulum hip joint simulator coupled with thin film colorimetric interferometry. FESEM and GDOES showed that precipitation-free C S-phase with a uniform case depth of 10μm was formed across the micro-textures after duplex treatment. Hip simulator tests showed that the friction coefficient was reduced by 20% for micro-metre sized texture, and the long-term tribological property of microtexture was enhanced by the C-supersaturated crystalline microstructure formed on the surface of duplex treated CoCrMo, thereby enhancing biotribological durability significantly. In-situ colorimetric interferometry confirmed that the maximum film thickness around texture area was 530nm, indicating that the additional lubricant during sliding motion might provide exceptional bearing life.
650    _2
$a inženýrství $x metody $7 D004738
650    _2
$a studie proveditelnosti $7 D005240
650    _2
$a tření $7 D017276
650    12
$a kyčelní protézy $7 D006622
650    12
$a vysoká teplota $7 D006358
650    _2
$a mechanické jevy $7 D055595
650    12
$a plazmové plyny $7 D058626
650    _2
$a povrchové vlastnosti $7 D013499
650    _2
$a vitalium $x chemie $7 D014800
655    _2
$a časopisecké články $7 D016428
655    _2
$a práce podpořená grantem $7 D013485
700    1_
$a Svoboda, Petr $u Faculty of Mechanical Engineering, Brno University of Technology, Brno 616 69, Czech Republic.
700    1_
$a Vrbka, Martin $u Faculty of Mechanical Engineering, Brno University of Technology, Brno 616 69, Czech Republic.
700    1_
$a Kostal, David $u Faculty of Mechanical Engineering, Brno University of Technology, Brno 616 69, Czech Republic.
700    1_
$a Urban, Filip $u Faculty of Mechanical Engineering, Brno University of Technology, Brno 616 69, Czech Republic.
700    1_
$a Cizek, Jan $u NETME Centre, Institute of Materials Science and Engineering, Brno University of Technology, 616 69, Czech Republic.
700    1_
$a Roupcova, Pavla $u Central European Institute of Technology (CEITEC), Brno 602 00, Czech Republic.
700    1_
$a Dong, Hanshan $u School of Metallurgy and Materials, Birmingham University, B15 2TT UK.
700    1_
$a Krupka, Ivan $u Faculty of Mechanical Engineering, Brno University of Technology, Brno 616 69, Czech Republic.
700    1_
$a Hartl, Martin, $u Faculty of Mechanical Engineering, Brno University of Technology, Brno 616 69, Czech Republic. $d 1967- $7 mzk2002157052
773    0_
$w MED00166961 $t Journal of the mechanical behavior of biomedical materials $x 1878-0180 $g Roč. 55, č. - (2015), s. 215-27
856    41
$u https://pubmed.ncbi.nlm.nih.gov/26594781 $y Pubmed
910    __
$a ABA008 $b sig $c sign $y a $z 0
990    __
$a 20161005 $b ABA008
991    __
$a 20170117102955 $b ABA008
999    __
$a ok $b bmc $g 1166243 $s 952559
BAS    __
$a 3
BAS    __
$a PreBMC
BMC    __
$a 2015 $b 55 $c - $d 215-27 $e 20151101 $i 1878-0180 $m Journal of the mechanical behavior of biomedical materials $n J Mech Behav Biomed Mater $x MED00166961
LZP    __
$a Pubmed-20161005

Najít záznam

Citační ukazatele

Možnosti archivace