Detail
Článek
Článek online
FT
Medvik - BMČ
  • Je něco špatně v tomto záznamu ?

Micro finite element analysis of dental implants under different loading conditions

P. Marcián, J. Wolff, L. Horáčková, J. Kaiser, T. Zikmund, L. Borák,

. 2018 ; 96 (-) : 157-165. [pub] 20180317

Jazyk angličtina Země Spojené státy americké

Typ dokumentu časopisecké články, práce podpořená grantem

Perzistentní odkaz   https://www.medvik.cz/link/bmc19028497

Osseointegration is paramount for the longevity of dental implants and is significantly influenced by biomechanical stimuli. The aim of the present study was to assess the micro-strain and displacement induced by loaded dental implants at different stages of osseointegration using finite element analysis (FEA). Computational models of two mandible segments with different trabecular densities were constructed using microCT data. Three different implant loading directions and two osseointegration stages were considered in the stress-strain analysis of the bone-implant assembly. The bony segments were analyzed using two approaches. The first approach was based on Mechanostat strain intervals and the second approach was based on tensile/compression yield strains. The results of this study revealed that bone surrounding dental implants is critically strained in cases when only a partial osseointegration is present and when an implant is loaded by buccolingual forces. In such cases, implants also encounter high stresses. Displacements of partially-osseointegrated implant are significantly larger than those of fully-osseointegrated implants. It can be concluded that the partial osseointegration is a potential risk in terms of implant longevity.

Citace poskytuje Crossref.org

000      
00000naa a2200000 a 4500
001      
bmc19028497
003      
CZ-PrNML
005      
20190820085816.0
007      
ta
008      
190813s2018 xxu f 000 0|eng||
009      
AR
024    7_
$a 10.1016/j.compbiomed.2018.03.012 $2 doi
035    __
$a (PubMed)29587150
040    __
$a ABA008 $b cze $d ABA008 $e AACR2
041    0_
$a eng
044    __
$a xxu
100    1_
$a Marcián, Petr $u Institute of Solid Mechanics, Mechatronics and Biomechanics, Faculty of Mechanical Engineering, Brno University of Technology, Brno, Czech Republic. Electronic address: marcian@fme.vutbr.cz.
245    10
$a Micro finite element analysis of dental implants under different loading conditions / $c P. Marcián, J. Wolff, L. Horáčková, J. Kaiser, T. Zikmund, L. Borák,
520    9_
$a Osseointegration is paramount for the longevity of dental implants and is significantly influenced by biomechanical stimuli. The aim of the present study was to assess the micro-strain and displacement induced by loaded dental implants at different stages of osseointegration using finite element analysis (FEA). Computational models of two mandible segments with different trabecular densities were constructed using microCT data. Three different implant loading directions and two osseointegration stages were considered in the stress-strain analysis of the bone-implant assembly. The bony segments were analyzed using two approaches. The first approach was based on Mechanostat strain intervals and the second approach was based on tensile/compression yield strains. The results of this study revealed that bone surrounding dental implants is critically strained in cases when only a partial osseointegration is present and when an implant is loaded by buccolingual forces. In such cases, implants also encounter high stresses. Displacements of partially-osseointegrated implant are significantly larger than those of fully-osseointegrated implants. It can be concluded that the partial osseointegration is a potential risk in terms of implant longevity.
650    _2
$a biomechanika $7 D001696
650    12
$a zubní implantáty $7 D015921
650    _2
$a analýza zatížení zubů $x metody $7 D003799
650    _2
$a analýza metodou konečných prvků $7 D020342
650    _2
$a lidé $7 D006801
650    _2
$a mužské pohlaví $7 D008297
650    _2
$a mandibula $x fyziologie $7 D008334
650    12
$a biologické modely $7 D008954
650    _2
$a osteointegrace $x fyziologie $7 D016348
650    _2
$a počítačové zpracování signálu $7 D012815
650    _2
$a mechanický stres $7 D013314
650    _2
$a rentgenová mikrotomografie $7 D055114
655    _2
$a časopisecké články $7 D016428
655    _2
$a práce podpořená grantem $7 D013485
700    1_
$a Wolff, Jan $u Department of Oral and Maxillofacial Surgery/Oral Pathology and 3D Innovation Lab, VU University Medical Center, Amsterdam, The Netherlands.
700    1_
$a Horáčková, Ladislava $u Department of Anatomy, Faculty of Medicine, Masaryk University, Brno, Czech Republic.
700    1_
$a Kaiser, Jozef $u X-ray Micro CT and Nano CT Research Group, CEITEC - Central European Institute of Technology, Brno University of Technology, Brno, Czech Republic.
700    1_
$a Zikmund, Tomáš $u X-ray Micro CT and Nano CT Research Group, CEITEC - Central European Institute of Technology, Brno University of Technology, Brno, Czech Republic.
700    1_
$a Borák, Libor $u Institute of Solid Mechanics, Mechatronics and Biomechanics, Faculty of Mechanical Engineering, Brno University of Technology, Brno, Czech Republic.
773    0_
$w MED00001218 $t Computers in biology and medicine $x 1879-0534 $g Roč. 96, č. - (2018), s. 157-165
856    41
$u https://pubmed.ncbi.nlm.nih.gov/29587150 $y Pubmed
910    __
$a ABA008 $b sig $c sign $y a $z 0
990    __
$a 20190813 $b ABA008
991    __
$a 20190820090052 $b ABA008
999    __
$a ok $b bmc $g 1433646 $s 1066957
BAS    __
$a 3
BAS    __
$a PreBMC
BMC    __
$a 2018 $b 96 $c - $d 157-165 $e 20180317 $i 1879-0534 $m Computers in biology and medicine $n Comput Biol Med $x MED00001218
LZP    __
$a Pubmed-20190813

Najít záznam

Citační ukazatele

Možnosti archivace