-
Something wrong with this record ?
Inkjet-printed electrochemically reduced graphene oxide microelectrode as a platform for HT-2 mycotoxin immunoenzymatic biosensing
J. Kudr, L. Zhao, EP. Nguyen, H. Arola, TK. Nevanen, V. Adam, O. Zitka, A. Merkoçi
Language English Country Great Britain
Document type Journal Article
- MeSH
- Biosensing Techniques instrumentation MeSH
- Equipment Design MeSH
- Electrochemical Techniques instrumentation MeSH
- Graphite chemistry MeSH
- Antibodies, Immobilized chemistry MeSH
- Immunoenzyme Techniques instrumentation MeSH
- Microelectrodes MeSH
- Oxidation-Reduction MeSH
- Reagent Strips analysis MeSH
- T-2 Toxin analogs & derivatives analysis MeSH
- Publication type
- Journal Article MeSH
The design and application of an inkjet-printed electrochemically reduced graphene oxide microelectrode for HT-2 mycotoxin immunoenzymatic biosensing is reported. A water-based graphene oxide ink was first formulated and single-drop line working microelectrodes were inkjet-printed onto poly(ethylene 2,6-naphthalate) substrates, with dimensions of 78 μm in width and 30 nm in height after solvent evaporation. The printed graphene oxide microelectrodes were electrochemically reduced and characterized by Raman and X-ray photoelectron spectroscopies in addition to microscopies. Through optimization of the electrochemical reduction parameters, differential pulse voltammetry were performed to examine the sensing of 1-naphthol (1-N), where it was revealed that reduction times had significant effects on electrode performance. The developed microelectrodes were then used as an immunoenzymatic biosensor for the detection of HT-2 mycotoxin based on carbodiimide linking of the microelectrode surface and HT-2 toxin antigen binding fragment of antibody (anti-HT2 (10) Fab). The HT-2 toxin and anti-HT2 (10) Fab reaction was reported by anti-HT2 immune complex single-chain variable fragment of antibody fused with alkaline phosphatase (anti-IC-HT2 scFv-ALP) which is able to produce an electroactive reporter - 1-N. The biosensor showed detection limit of 1.6 ng ∙ mL-1 and a linear dynamic range of 6.3 - 100.0 ng ∙ mL-1 within a 5 min incubation with 1-naphthyl phosphate (1-NP) substrate.
Central European Institute of Technology Brno University of Technology Brno CZ 616 00 Czech Republic
Department of Chemical Engineering School of Engineering UAB Bellaterra ES 08193 Spain
ICREA Institució Catalana de Recerca i Estudis Avançats Barcelona ES 08010 Spain
VTT Technical Research Centre of Finland Espoo FI 02150 Finland
References provided by Crossref.org
- 000
- 00000naa a2200000 a 4500
- 001
- bmc21012585
- 003
- CZ-PrNML
- 005
- 20210507101724.0
- 007
- ta
- 008
- 210420s2020 xxk f 000 0|eng||
- 009
- AR
- 024 7_
- $a 10.1016/j.bios.2020.112109 $2 doi
- 035 __
- $a (PubMed)32275576
- 040 __
- $a ABA008 $b cze $d ABA008 $e AACR2
- 041 0_
- $a eng
- 044 __
- $a xxk
- 100 1_
- $a Kudr, Jiri $u Catalan Institute of Nanoscience and Nanotechnology (ICN2), CSIC and The Barcelona Institute of Science and Technology, Bellaterra, ES-08193, Spain; Department of Chemistry and Biochemistry, Mendel University in Brno, Zemedelska 1, Brno, CZ-613 00, Czech Republic
- 245 10
- $a Inkjet-printed electrochemically reduced graphene oxide microelectrode as a platform for HT-2 mycotoxin immunoenzymatic biosensing / $c J. Kudr, L. Zhao, EP. Nguyen, H. Arola, TK. Nevanen, V. Adam, O. Zitka, A. Merkoçi
- 520 9_
- $a The design and application of an inkjet-printed electrochemically reduced graphene oxide microelectrode for HT-2 mycotoxin immunoenzymatic biosensing is reported. A water-based graphene oxide ink was first formulated and single-drop line working microelectrodes were inkjet-printed onto poly(ethylene 2,6-naphthalate) substrates, with dimensions of 78 μm in width and 30 nm in height after solvent evaporation. The printed graphene oxide microelectrodes were electrochemically reduced and characterized by Raman and X-ray photoelectron spectroscopies in addition to microscopies. Through optimization of the electrochemical reduction parameters, differential pulse voltammetry were performed to examine the sensing of 1-naphthol (1-N), where it was revealed that reduction times had significant effects on electrode performance. The developed microelectrodes were then used as an immunoenzymatic biosensor for the detection of HT-2 mycotoxin based on carbodiimide linking of the microelectrode surface and HT-2 toxin antigen binding fragment of antibody (anti-HT2 (10) Fab). The HT-2 toxin and anti-HT2 (10) Fab reaction was reported by anti-HT2 immune complex single-chain variable fragment of antibody fused with alkaline phosphatase (anti-IC-HT2 scFv-ALP) which is able to produce an electroactive reporter - 1-N. The biosensor showed detection limit of 1.6 ng ∙ mL-1 and a linear dynamic range of 6.3 - 100.0 ng ∙ mL-1 within a 5 min incubation with 1-naphthyl phosphate (1-NP) substrate.
- 650 _2
- $a imobilizační protilátky $x chemie $7 D055910
- 650 _2
- $a biosenzitivní techniky $x přístrojové vybavení $7 D015374
- 650 _2
- $a elektrochemické techniky $x přístrojové vybavení $7 D055664
- 650 _2
- $a design vybavení $7 D004867
- 650 _2
- $a grafit $x chemie $7 D006108
- 650 _2
- $a imunoenzymatické techniky $x přístrojové vybavení $7 D007124
- 650 _2
- $a mikroelektrody $7 D008839
- 650 _2
- $a oxidace-redukce $7 D010084
- 650 _2
- $a reagenční papírky $x analýza $7 D011934
- 650 _2
- $a T-2 toxin $x analogy a deriváty $x analýza $7 D013605
- 655 _2
- $a časopisecké články $7 D016428
- 700 1_
- $a Zhao, Lei $u Catalan Institute of Nanoscience and Nanotechnology (ICN2), CSIC and The Barcelona Institute of Science and Technology, Bellaterra, ES-08193, Spain; Department of Chemical Engineering, School of Engineering, UAB, Bellaterra, ES-08193, Spain
- 700 1_
- $a Nguyen, Emily P $u Catalan Institute of Nanoscience and Nanotechnology (ICN2), CSIC and The Barcelona Institute of Science and Technology, Bellaterra, ES-08193, Spain
- 700 1_
- $a Arola, Henri $u VTT Technical Research Centre of Finland, Espoo, FI-02150, Finland
- 700 1_
- $a Nevanen, Tarja K $u VTT Technical Research Centre of Finland, Espoo, FI-02150, Finland
- 700 1_
- $a Adam, Vojtech $u Department of Chemistry and Biochemistry, Mendel University in Brno, Zemedelska 1, Brno, CZ-613 00, Czech Republic; Central European Institute of Technology, Brno University of Technology, Brno, CZ-616 00, Czech Republic
- 700 1_
- $a Zitka, Ondrej $u Department of Chemistry and Biochemistry, Mendel University in Brno, Zemedelska 1, Brno, CZ-613 00, Czech Republic; Central European Institute of Technology, Brno University of Technology, Brno, CZ-616 00, Czech Republic
- 700 1_
- $a Merkoçi, Arben $u Catalan Institute of Nanoscience and Nanotechnology (ICN2), CSIC and The Barcelona Institute of Science and Technology, Bellaterra, ES-08193, Spain; ICREA - Institució Catalana de Recerca i Estudis Avançats, Barcelona, ES-08010, Spain. Electronic address: arben.merkoci@icn2.cat
- 773 0_
- $w MED00006627 $t Biosensors & bioelectronics $x 1873-4235 $g Roč. 156, č. - (2020), s. 112109
- 856 41
- $u https://pubmed.ncbi.nlm.nih.gov/32275576 $y Pubmed
- 910 __
- $a ABA008 $b sig $c sign $y p $z 0
- 990 __
- $a 20210420 $b ABA008
- 991 __
- $a 20210507101724 $b ABA008
- 999 __
- $a ok $b bmc $g 1650865 $s 1132964
- BAS __
- $a 3
- BAS __
- $a PreBMC
- BMC __
- $a 2020 $b 156 $c - $d 112109 $e 20200221 $i 1873-4235 $m Biosensors & bioelectronics $n Biosens Bioelectron $x MED00006627
- LZP __
- $a Pubmed-20210420