• Je něco špatně v tomto záznamu ?

Synthesis of Porous Polydimethylsiloxane Gold Nanoparticles Composites by a Single Step Laser Ablation Process

M. Cutroneo, V. Havranek, A. Mackova, P. Malinsky, L. Silipigni, P. Slepicka, D. Fajstavr, L. Torrisi

. 2021 ; 22 (22) : . [pub] 20211110

Jazyk angličtina Země Švýcarsko

Typ dokumentu časopisecké články

Perzistentní odkaz   https://www.medvik.cz/link/bmc22003209

Typically, polymeric composites containing nanoparticles are realized by incorporating pre-made nanoparticles into a polymer matrix by using blending solvent or by the reduction of metal salt dispersed in the polymeric matrix. Generally, the production of pre-made Au NPs occurs in liquids with two-step processes: producing the gold nanoparticles first and then adding them to the liquid polymer. A reproducible method to synthetize Au nanoparticles (NPs) into polydimethylsiloxane (PDMS) without any external reducing or stabilizing agent is a challenge. In this paper, a single-step method is proposed to synthetize nanoparticles (NPs) and at the same time to realize reproducible porous and bulk composites using laser ablation in liquid. With this single-step process, the gold nanoparticles are therefore produced directly in the liquid polymer. The optical properties of the suspensions of AuNPs in distilled water and in the curing agent have been analyzed by the UV-VIS spectroscopy, employed in the transmission mode, and compared with those of the pure curing agent. The electrical dc conductivity of the porous PDMS/Au NPs nanocomposites has been evaluated by the I-V characteristics. Scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) analysis have monitored the composition and morphology of the so-obtained composites and the size of the fabricated Au nanoparticles. Atomic force microscopy (AFM) has been used to determine the roughness of the bulk PDMS and its Au NP composites.

Citace poskytuje Crossref.org

000      
00000naa a2200000 a 4500
001      
bmc22003209
003      
CZ-PrNML
005      
20240618103735.0
007      
ta
008      
220113s2021 sz f 000 0|eng||
009      
AR
024    7_
$a 10.3390/ijms222212155 $2 doi
035    __
$a (PubMed)34830035
040    __
$a ABA008 $b cze $d ABA008 $e AACR2
041    0_
$a eng
044    __
$a sz
100    1_
$a Cutroneo, Mariapompea $u Nuclear Physics Institute, AS CR, 250 68 Rez, Czech Republic
245    10
$a Synthesis of Porous Polydimethylsiloxane Gold Nanoparticles Composites by a Single Step Laser Ablation Process / $c M. Cutroneo, V. Havranek, A. Mackova, P. Malinsky, L. Silipigni, P. Slepicka, D. Fajstavr, L. Torrisi
520    9_
$a Typically, polymeric composites containing nanoparticles are realized by incorporating pre-made nanoparticles into a polymer matrix by using blending solvent or by the reduction of metal salt dispersed in the polymeric matrix. Generally, the production of pre-made Au NPs occurs in liquids with two-step processes: producing the gold nanoparticles first and then adding them to the liquid polymer. A reproducible method to synthetize Au nanoparticles (NPs) into polydimethylsiloxane (PDMS) without any external reducing or stabilizing agent is a challenge. In this paper, a single-step method is proposed to synthetize nanoparticles (NPs) and at the same time to realize reproducible porous and bulk composites using laser ablation in liquid. With this single-step process, the gold nanoparticles are therefore produced directly in the liquid polymer. The optical properties of the suspensions of AuNPs in distilled water and in the curing agent have been analyzed by the UV-VIS spectroscopy, employed in the transmission mode, and compared with those of the pure curing agent. The electrical dc conductivity of the porous PDMS/Au NPs nanocomposites has been evaluated by the I-V characteristics. Scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) analysis have monitored the composition and morphology of the so-obtained composites and the size of the fabricated Au nanoparticles. Atomic force microscopy (AFM) has been used to determine the roughness of the bulk PDMS and its Au NP composites.
650    _2
$a dimethylpolysiloxany $x chemie $7 D004129
650    _2
$a zlato $x chemie $7 D006046
650    12
$a laserová terapie $7 D053685
650    _2
$a kovové nanočástice $x chemie $7 D053768
650    _2
$a nanokompozity $x chemie $7 D053761
650    _2
$a poréznost $7 D016062
655    _2
$a časopisecké články $7 D016428
700    1_
$a Havranek, Vladimir $u Nuclear Physics Institute, AS CR, 250 68 Rez, Czech Republic
700    1_
$a Mackova, Anna $u Nuclear Physics Institute, AS CR, 250 68 Rez, Czech Republic $u Department of Physics, Faculty of Science, University of J. E. Purkyně, České Mládeže 8, 400 96 Ústí nad Labem, Czech Republic
700    1_
$a Malinsky, Petr $u Nuclear Physics Institute, AS CR, 250 68 Rez, Czech Republic $u Department of Physics, Faculty of Science, University of J. E. Purkyně, České Mládeže 8, 400 96 Ústí nad Labem, Czech Republic
700    1_
$a Silipigni, Letteria $u Department of Physics (MIFT), Messina University, V.le F.S. D'Alcontres 31, 98166 Messina, Italy $u INFN, Sezione di Catania, Via S. Sofia 64, 95123 Catania, Italy
700    1_
$a Slepicka, Petr $u Department of Solid State Engineering, Institute of Chemical Technology, 166 28 Prague, Czech Republic
700    1_
$a Fajstavr, Dominik $u Department of Solid State Engineering, Institute of Chemical Technology, 166 28 Prague, Czech Republic $7 xx0318828
700    1_
$a Torrisi, Lorenzo $u Department of Physics (MIFT), Messina University, V.le F.S. D'Alcontres 31, 98166 Messina, Italy $u INFN, Sezione di Catania, Via S. Sofia 64, 95123 Catania, Italy
773    0_
$w MED00176142 $t International journal of molecular sciences $x 1422-0067 $g Roč. 22, č. 22 (2021)
856    41
$u https://pubmed.ncbi.nlm.nih.gov/34830035 $y Pubmed
910    __
$a ABA008 $b sig $c sign $y p $z 0
990    __
$a 20220113 $b ABA008
991    __
$a 20240618103736 $b ABA008
999    __
$a ok $b bmc $g 1750846 $s 1154358
BAS    __
$a 3
BAS    __
$a PreBMC
BMC    __
$a 2021 $b 22 $c 22 $e 20211110 $i 1422-0067 $m International journal of molecular sciences $n Int J Mol Sci $x MED00176142
LZP    __
$a Pubmed-20220113
Zpět

Najít záznam

Citační ukazatele

Možnosti archivace