We present experimental demonstration of an end-pumping scheme based on splicing the multimode pump and single-mode signal fibers directly to a double-clad fiber with a tailored cross section. The method is used to pump a double-clad, erbium- and ytterbium-doped, fiber ring laser. The efficiency of the end-pumping method is tested by determining the slope efficiencies of the fiber ring laser and the fiber laser in a Fabry-Perot configuration. Comparable slope efficiencies are found when both laser configurations have similar output coupler ratios. The developed pumping scheme and double-clad fiber can find applications in cost-effective power fiber amplifiers and lasers.

Institute of Radio Engineering and Electronics Academy of Sciences Chaberská 57 18251 Prague Czech Republic

Citace poskytuje Crossref.org

Active Optical Fibers and Components for Fiber Lasers Emitting in the 2-μm Spectral Range