Environments in the vicinity of the lead (Pb) smelters are contaminated by emissions containing high concentrations of antimony (Sb) and arsenic (As). Air-pollution-control (APC) residues from bag-type filters from a secondary Pb smelter were subjected to leaching experiments to elucidate the controlling mechanisms of Sb and As release. Kinetic batch leaching tests at a liquid-to-solid (L/S) ratio of 10 L kg(- 1) within the time frame of 720 hours and batch leaching at various L/S ratios (ranging from 1 to 1000 L kg(-1)) were performed. In contrast to other inorganic contaminants (Pb, Cd, Zn), less than 1% of the total Sb and As content was leached from the residues. At a L/S ratio of 10, the As and Sb concentrations in the leachates exceeded the EU limit values for non-hazardous waste (0.2 and 0.07 mg L(-1) ). According to PHREEQC-2 calculations, the concentrations of As and Sb are controlled by the precipitation of complex arsenates and antimonates mainly at low L/S ratios. The washing and related chemical/mineralogical transformation of APC residues was suggested as a technological pre-treatment process before their re-smelting in a blast furnace. The Ferrox-like processing of the resulting contaminated process water/leachate was simulated using the PHREEQC-2 code. Significant reduction was obtained in the concentration of some key contaminants (As, Cu, Pb, Zn) related to sorption on newly formed hydrous ferric oxides, whereas Sb and Cd exhibited only limited attenuation.

Institute of Geochemistry Mineralogy and Mineral Resources Charles University Prague Czech Republic

Citace poskytuje Crossref.org