Properties of the waste treatment residual fly ash generated from municipal solid waste incinerator fly ash were investigated in this study. Six different mortar blends with the addition of the municipal solid waste incinerator fly ash were evaluated. The Portland cement replacement levels of the municipal solid waste incinerator fly ash used were 25%, 30% and 50%. Both, raw and washed municipal solid waste incinerator fly ash samples were examined. According to the mineralogical composition measurements, a 22.6% increase in the pozzolanic/hydraulic properties was observed for the washed municipal solid waste incinerator fly ash sample. The maximum replacement level of 25% for the washed municipal solid waste incinerator fly ash in mortar blends was established in order to preserve the compressive strength properties. Moreover, the leaching characteristics of the crushed mortar blend was analysed in order to examine the immobilisation of its hazardous contents.

ENET Energy Units for Utilization of Non Traditional Energy Sources VŠB Technical University of Ostrava Ostrava Czech Republic

Institute of Chemical Engineering Vienna University of Technology Vienna Austria

Institute of Environmental Engineering VŠB Technical University of Ostrava Ostrava Czech Republic

Institute of Geological Engineering VŠB Technical University of Ostrava Ostrava Czech Republic

Citace poskytuje Crossref.org