Possibilities of retention prediction in fast gradient liquid chromatography. Part 3: Short silica monolithic columns
Jazyk angličtina Země Nizozemsko Médium print-electronic
Typ dokumentu časopisecké články
PubMed
26239700
DOI
10.1016/j.chroma.2015.07.070
PII: S0021-9673(15)01038-9
Knihovny.cz E-zdroje
- Klíčová slova
- Fast separations, Gradient elution, Modeling of chromatography, Monolithic columns, Two-dimensional chromatography,
- MeSH
- acetonitrily MeSH
- benzenové deriváty analýza MeSH
- chromatografie kapalinová přístrojové vybavení metody MeSH
- flavony analýza MeSH
- oxid křemičitý chemie MeSH
- rozpouštědla MeSH
- statistické modely MeSH
- voda MeSH
- Publikační typ
- časopisecké články MeSH
- Názvy látek
- acetonitrile MeSH Prohlížeč
- acetonitrily MeSH
- benzenové deriváty MeSH
- flavony MeSH
- octadecylsilica MeSH Prohlížeč
- oxid křemičitý MeSH
- rozpouštědla MeSH
- voda MeSH
We studied possibilities of prediction of the gradient elution data for alkylbenzenes, flavones and phenolic acids on two short octadecyl silica gel monolithic columns, namely a Chromolith Flash C18, 25×4.6mm, and a "new generation" Chromolith High Resolution C18, 50×4.6mm, in fast 1-2min gradients. With fixed short gradient times and varying gradient ranges of acetonitrile concentration in water, high flow rates of the mobile phase (3-5mL/min) could be used. The gradient elution data were predicted from four gradient models based on two-parameter and three-parameter isocratic retention equations. Various gradient retention models can be used for prediction of chromatograms and optimization of separation within a fixed gradient time. A two-parameter log-log model introduced in 1974 and a three-parameter model introduced in 1980 provided slightly more accurate prediction than the Linear Solvent Strength (LSS) semi-logarithmic two-parameter model, most frequently used in reversed-phase LC. A three-parameter model introduced in 1978 provided slightly improved accuracy of prediction of gradient data with respect to two-parameter models, in contrast to another, more recent three-parameter empirical model introduced in 2010 (which failed for gradients starting at a non-zero concentration of acetonitrile). Both a longer (5cm) and more efficient Chromolith HR column and a shorter (2.5cm) slightly less efficient Chromolith Flash column provide useful separations in fast gradients (1-2min) at high flow rates (3.5-5mL/min), especially in second dimension of two-dimensional LC×LC, in combination with HILIC separation on monolithic microcolumn in D1.
Citace poskytuje Crossref.org