Laser-synthesized nanocrystalline, ferroelectric, bioactive BaTiO3/Pt/FS for bone implants
Jazyk angličtina Země Anglie, Velká Británie Médium print-electronic
Typ dokumentu časopisecké články, práce podpořená grantem
PubMed
29621929
DOI
10.1177/0885328218768646
Knihovny.cz E-zdroje
- Klíčová slova
- BaTiO3, Pulsed laser deposition, biotests, ferroelectricity, implants,
- MeSH
- buněčné linie MeSH
- elektřina MeSH
- kostní náhrady chemie MeSH
- lasery MeSH
- lidé MeSH
- nanočástice chemie ultrastruktura MeSH
- osteoblasty cytologie MeSH
- osteogeneze MeSH
- oxid křemičitý chemie MeSH
- platina chemie MeSH
- protézy a implantáty MeSH
- sloučeniny barya chemie MeSH
- titan chemie MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
- Názvy látek
- barium titanate(IV) MeSH Prohlížeč
- kostní náhrady MeSH
- oxid křemičitý MeSH
- platina MeSH
- sloučeniny barya MeSH
- titan MeSH
The goal of our study is to design BaTiO3 ferroelectric layers that will cover metal implants and provide improved osseointegration. We synthesized ferroelectric BaTiO3 layers on Pt/fused silica substrates, and we studied their physical and bio-properties. BaTiO3 and Pt layers were prepared using KrF excimer laser ablation at substrate temperature Ts in the range from 200°C to 750°C in vacuum or under oxygen pressure of 10 Pa, 15 Pa, and 20 Pa. The BaTiO3/Pt and Pt layers adhered well to the substrates. BaTiO3 films of crystallite size 60-140 nm were fabricated. Ferroelectric loops were measured and ferroelectricity was also confirmed using Raman scattering measurements. Results of atomic force microscopy topology and the X-ray diffraction structure of the BaTiO3/Pt/fused silica multilayers are presented. The adhesion, viability, growth, and osteogenic differentiation of human osteoblast-like Saos-2 cells were also studied. On days 1, 3, and 7 after seeding, the lowest cell numbers were found on non-ferroelectric BaTiO3, while the values on ferroelectric BaTiO3, on non-annealed and annealed Pt interlayers, and on the control tissue culture polystyrene dishes and microscopic glass slides were similar, and were usually significantly higher than on non-ferroelectric BaTiO3. A similar trend was observed for the intensity of the fluorescence of alkaline phosphatase, a medium-term marker of osteogenic differentiation, and of osteocalcin, a late marker of osteogenic differentiation. At the same time, the cell viability, tested on day 1 after seeding, was very high on all tested samples, reaching 93-99%. Ferroelectric BaTiO3 films deposited on metallic bone implants through a Pt interlayer can therefore markedly improve the osseointegration of these implants in comparison with non-ferroelectric BaTiO3 films.
Czech Technical University Prague Faculty of Biomedical Engineering Kladno Czech Republic
Institute of Physics of the Czech Academy of Sciences Prague 8 Czech Republic
Institute of Physiology of the Czech Academy of Sciences Prague 4 Czech Republic
Citace poskytuje Crossref.org