Scarcity of medical resources inspired many teams worldwide to design ventilators utilizing different approaches during the recent COVID-19 pandemic. Although it can be relatively easy to design a simple ventilator in a laboratory, a large scale production of reliable emergency ventilators which meet international standards for critical care ventilators is challenging and time consuming. The aim of this study is to propose a novel and easily manufacturable principle of gas mixing and inspiratory flow generation for mechanical lung ventilators. Two fast ON/OFF valves, one for air and one for oxygen, are used to control the inspiratory flow generation using pulse width modulation. Short gas flow pulses are smoothed by low-pass acoustic filters and do not propagate further into the patient circuit. At the same time, the appropriate pulse width modulation of both ON/OFF valves controls the oxygen fraction in the generated gas mixture. Tests focused on the accuracy of the delivered oxygen fractions and tidal volumes have proved compliance with the international standards for critical care ventilators. The concept of a simple construction using two fast ON/OFF valves may be used for designing mechanical lung ventilators and thus suitable for their rapid production during pandemics.

Department of Biomedical Technology Faculty of Biomedical Engineering Czech Technical University Prague Prague Czech Republic

Zobrazit více v PubMed

World Health Organization. Mass casualty management systems. Strategies and guidelines for building health sector capacity (2007).

Wilgis J. Strategies for providing mechanical ventilation in a mass casualty incident: Distribution versus stockpiling. Respir Care. 2008;53:96–103. PubMed

Coccolini F, et al. COVID-19 the showdown for mass casualty preparedness and management: The Cassandra Syndrome. World J. Emerg. Surg. 2020;15:1–6. doi: 10.1186/s13017-020-00304-5. PubMed DOI PMC

Rosenbaum L. Facing Covid-19 in Italy—Ethics, logistics, and therapeutics on the epidemic’s front line. N. Engl. J. Med. 2020;382:1873–1875. doi: 10.1056/NEJMp2005492. PubMed DOI

Pearce, J. M. A review of open source ventilators for COVID-19 and future pandemics. F1000Research9, 218 (2020). PubMed PMC

Al Husseini AM, et al. Design and prototyping of a low-cost portable mechanical ventilator. Trans. ASME-W-J. Med. Dev. 2010;4:027514. PubMed PMC

Nguyen J, et al. Repurposing CPAP machines as stripped-down ventilators. Sci. Rep. 2021;11:1–9. PubMed PMC

Medical electrical equipment—Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators. In: ISO 80601-2-12:2020 (International Organization for Standardization, 2020).

Papazian L, et al. Formal guidelines: Management of acute respiratory distress syndrome. Ann. Intensive Care. 2019;9:69. doi: 10.1186/s13613-019-0540-9. PubMed DOI PMC

Griffiths MJ, et al. Guidelines on the management of acute respiratory distress syndrome. BMJ Open Respir. Res. 2019;6:e000420. doi: 10.1136/bmjresp-2019-000420. PubMed DOI PMC

Griffiths MJ, et al. RAND appropriateness panel to determine the applicability of UK guidelines on the management of acute respiratory distress syndrome (ARDS) and other strategies in the context of the COVID-19 pandemic. Thorax. 2022;77:129–135. doi: 10.1136/thoraxjnl-2021-216904. PubMed DOI

Navas-Blanco JR, Dudaryk R. Management of respiratory distress syndrome due to COVID-19 infection. BMC Anesthesiol. 2020;20:1–6. doi: 10.1186/s12871-020-01095-7. PubMed DOI PMC

Alhazzani W, et al. Surviving sepsis campaign guidelines on the management of adults with coronavirus disease 2019 (COVID-19) in the ICU: first update. Crit. Care Med. 2021;49:219–234. doi: 10.1097/CCM.0000000000004899. PubMed DOI

Teschler, L. More dangerous than the virus? Converting manual resuscitators to ventilators. Medical Design and Outsourcing. https://www.medicaldesignandoutsourcing.com/more-dangerous-than-the-virus-converting-manual-resuscitators-to-ventilators/ (2022).

Tobin MJ. Principles and practice of mechanical ventilation. Haymarket: McGraw Hill Professional; 2012.

Devereaux, A. V. et al. Oxygen and Ventilator Logistics During California's COVID-19 Surge: When Oxygen Becomes a Scarce Resource. Disaster Med. Public Health Prep. 1–7 (2021). PubMed PMC

Medical gas pipeline systems: Part 1: Pipeline systems for compressed medical gases and vacuum. In: ISO 7396-1:2016 (International Organization for Standardization, 2016).

Roubik K, Stranska M. A method of compliance measurement and gastight testing in models of the respiratory system. Lekar Tech. Clin. Technol. 2014;44:9–18.

Bis L, Roubik K. Design and performance of a flow sensor CoroQuant used with emergency lung ventilator CoroVent during COVID-19 pandemic. Meas. Sens. 2022;22:100383. doi: 10.1016/j.measen.2022.100383. PubMed DOI PMC

FDA. Ventilators and Ventilator Accessories EUAs. https://www.fda.gov/medical-devices/coronavirus-disease-2019-covid-19-emergency-use-authorizations-medical-devices/ventilators-and-ventilator-accessories-euas (Accessed on March 6, 2023).

Branson RD, Rodriquez D. COVID-19 lessons learned: Response to the anticipated ventilator shortage. Respir Care. 2023;68:129–150. doi: 10.4187/respcare.10676. PubMed DOI PMC