In response to the growing need for development of modern biomaterials for applications in regenerative medicine strategies, the research presented here investigated the biological potential of two types of polymer nanocomposites. Graphene oxide (GO) and partially reduced graphene oxide (rGO) were incorporated into a poly(ε-caprolactone) (PCL) matrix, creating PCL/GO and PCL/rGO nanocomposites in the form of membranes. Proliferation of osteoblast-like cells (human U-2 OS cell line) on the surface of the studied materials confirmed their biological activity. Fluorescence microscopy was able to distinguish the different patterns of interaction between cells (depending on the type of material) after 15 days of the test run. Raman micro-spectroscopy and two-dimensional correlation spectroscopy (2D-COS) applied to Raman spectra distinguished the nature of cell-material interactions after only 8 days. Combination of these two techniques (Raman micro-spectroscopy and 2D-COS analysis) facilitated identification of a much more complex cellular response (especially from proteins) on the surface of PCL/GO. The presented approach can be regarded as a method for early study of the bioactivity of membrane materials.
- MeSH
- grafit * farmakologie chemie MeSH
- lidé MeSH
- osteoblasty MeSH
- polyestery chemie MeSH
- polymery MeSH
- Ramanova spektroskopie MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
The COVID-19 pandemic has raised the problem of efficient, low-cost materials enabling the effective protection of people from viruses transmitted through the air or via surfaces. Nanofibers can be a great candidate for efficient air filtration due to their structure, although they cannot protect from viruses. In this work, we prepared a wide range of nanofibrous biodegradable samples containing Ag (up to 0.6 at.%) and Cu (up to 20.4 at.%) exhibiting various wettability. By adjusting the magnetron current (0.3 A) and implanter voltage (5 kV), the deposition of TiO2 and Ag+ implantation into PCL/PEO nanofibers was optimized in order to achieve implantation of Ag+ without damaging the nanofibrous structure of the PCL/PEO. The optimal conditions to implant silver were achieved for the PCL-Ti0.3-Ag-5kV sample. The coating of PCL nanofibers by a Cu layer was successfully realized by magnetron sputtering. The antiviral activity evaluated by widely used methodology involving the cultivation of VeroE6 cells was the highest for PCL-Cu and PCL-COOH, where the VeroE6 viability was 73.1 and 68.1%, respectively, which is significantly higher compared to SARS-CoV-2 samples without self-sanitizing (42.8%). Interestingly, the samples with implanted silver and TiO2 exhibited no antiviral effect. This difference between Cu and Ag containing nanofibers might be related to the different concentrations of ions released from the samples: 80 μg/L/day for Cu2+ versus 15 μg/L/day for Ag+. The high antiviral activity of PCL-Cu opens up an exciting opportunity to prepare low-cost self-sanitizing surfaces for anti-SARS-CoV-2 protection and can be essential for air filtration application and facemasks. The rough cost estimation for the production of a biodegradable nanohybrid PCL-Cu facemask revealed ~$0.28/piece, and the business case for the production of these facemasks would be highly positive, with an Internal Rate of Return of 34%.
- MeSH
- antivirové látky chemie MeSH
- biokompatibilní potahované materiály chemie MeSH
- Cercopithecus aethiops MeSH
- COVID-19 prevence a kontrola přenos MeSH
- lidé MeSH
- měď chemie MeSH
- nanovlákna chemie MeSH
- polyestery chemie MeSH
- SARS-CoV-2 chemie MeSH
- titan chemie MeSH
- Vero buňky MeSH
- zlato chemie MeSH
- zvířata MeSH
- Check Tag
- lidé MeSH
- zvířata MeSH
- Publikační typ
- časopisecké články MeSH
The aim of this study was to fabricate novel microparticles (MPs) for efficient and long-term delivery of amikacin (AMI). The emulsification method proposed for encapsulating AMI employed low-molecular-weight poly(lactic acid) (PLA) and poly(lactic acid-co-polyethylene glycol) (PLA-PEG), both supplemented with poly(vinyl alcohol) (PVA). The diameters of the particles obtained were determined as less than 30 μm. Based on an in-vitro release study, it was proven that the MPs (both PLA/PVA- and PLA-PEG/PVA-based) demonstrated long-term AMI release (2 months), the kinetics of which adhered to the Korsmeyer-Peppas model. The loading efficiencies of AMI in the study were determined at the followings levels: 36.5 ± 1.5 μg/mg for the PLA-based MPs and 106 ± 32 μg/mg for the PLA-PEG-based MPs. These values were relatively high and draw parallels with studies published on the encapsulation of aminoglycosides. The MPs provided antimicrobial action against the Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Klebsiella pneumoniae bacterial strains. The materials were also comprehensively characterized by the following methods: differential scanning calorimetry; gel permeation chromatography; scanning electron microscopy; Fourier transform infrared spectroscopy-attenuated total reflectance; energy-dispersive X-ray fluorescence; and Brunauer-Emmett-Teller surface area analysis. The findings of this study contribute toward discerning new means for conducting targeted therapy with polar, broad spectrum antibiotics.
- MeSH
- amikacin aplikace a dávkování chemie MeSH
- antibakteriální látky aplikace a dávkování chemie MeSH
- Escherichia coli účinky léků MeSH
- Klebsiella pneumoniae účinky léků MeSH
- laktáty chemie MeSH
- mikrobiální testy citlivosti MeSH
- molekulová hmotnost MeSH
- nosiče léků chemie MeSH
- polyestery chemie MeSH
- polyethylenglykoly chemie MeSH
- polyvinylalkohol chemie MeSH
- příprava léků metody MeSH
- Pseudomonas aeruginosa účinky léků MeSH
- rozpustnost MeSH
- Staphylococcus aureus účinky léků MeSH
- tobolky MeSH
- uvolňování léčiv MeSH
- velikost částic MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
Fused deposition modelling (FDM) is a process of additive manufacturing allowing creating of highly precise complex three-dimensional objects for a large range of applications. The principle of FDM is an extrusion of the molten filament and gradual deposition of layers and their solidification. Potential applications in pharmaceutical and medical fields require the development of biodegradable and biocompatible thermoplastics for the processing of filaments. In this work, the potential of production of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P(3HB-co-4HB)) filaments for FDM was investigated in respect to its thermal stability. Copolymer P(3HB-co-4HB) was biosynthesised by Cupriavidus malaysiensis. Rheological and mechanical properties of the copolymer were modified by the addition of plasticizers or blending with poly(lactic acid). Thermal stability of mixtures was studied employing thermogravimetric analysis and rheological analyses by monitoring the time-dependent changes in the complex viscosity of melt samples. The plasticization of P(3HB-co-4HB) slightly hindered its thermal degradation but the best stabilization effect was found in case of the copolymer blended with poly(lactic acid). Overall, rheological, thermal and mechanical properties demonstrated that the plasticized P(3HB-co-4HB) is a potential candidate of biodegradable polymer for FDM processes.
The aim of our research was to study the behaviour of adipose tissue-derived stem cells (ADSCs) and vascular smooth muscle cells (VSMCs) on variously modified poly(L-lactide) (PLLA) foils, namely on pristine PLLA, plasma-treated PLLA, PLLA grafted with polyethylene glycol (PEG), PLLA grafted with dextran (Dex), and the tissue culture polystyrene (PS) control. On these materials, the ADSCs were biochemically differentiated towards VSMCs by a medium supplemented with TGFβ1, BMP4 and ascorbic acid (i.e. differentiation medium). ADSCs cultured in a non-differentiation medium were used as a negative control. Mature VSMCs cultured in both types of medium were used as a positive control. The impact of the variously modified PLLA foils and/or differences in the composition of the medium were studied with reference to cell adhesion, growth and differentiation. We observed similar adhesion and growth of ADSCs on all PLLA samples when they were cultured in the non-differentiation medium. The differentiation medium supported the expression of specific early, mid-term and/or late markers of differentiation (i.e. type I collagen, αSMA, calponin, smoothelin, and smooth muscle myosin heavy chain) in ADSCs on all tested samples. Moreover, ADSCs cultured in the differentiation medium revealed significant differences in cell growth among the samples that were similar to the differences observed in the cultures of VSMCs. The round morphology of the VSMCs indicated worse adhesion to pristine PLLA, and this sample was also characterized by the lowest cell proliferation. Culturing VSMCs in the differentiation medium inhibited their metabolic activity and reduced the cell numbers. Both cell types formed the most stable monolayer on plasma-treated PLLA and on the PS control. The behaviour of ADSCs and VSMCs on the tested PLLA foils differed according to the specific cell type and culture conditions. The suitable biocompatibility of both cell types on the tested PLLA foils seems to be favourable for vascular tissue engineering purposes.
- MeSH
- aorta metabolismus MeSH
- biokompatibilní materiály MeSH
- biopolymery chemie MeSH
- buněčná adheze MeSH
- buněčná diferenciace účinky léků MeSH
- kmenové buňky cytologie MeSH
- mikroskopie atomárních sil MeSH
- myocyty hladké svaloviny cytologie MeSH
- oxaziny chemie MeSH
- polyestery chemie MeSH
- polymery chemie MeSH
- polysacharidy chemie MeSH
- polystyreny chemie MeSH
- povrchové vlastnosti MeSH
- prasata MeSH
- proliferace buněk MeSH
- svaly hladké cévní cytologie MeSH
- testování materiálů MeSH
- tkáňové inženýrství metody MeSH
- tuková tkáň metabolismus MeSH
- xantheny chemie MeSH
- zvířata MeSH
- Check Tag
- zvířata MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
The effectiveness of cell transplantation can be improved by optimization of the transplantation site. For some types of cells that form highly oxygen-demanding tissue, e.g., pancreatic islets, a successful engraftment depends on immediate and sufficient blood supply. This critical point can be avoided when cells are transplanted into a bioengineered pre-vascularized cavity which can be formed using a polymer scaffold. In our study, we tested surface-modified poly(lactide-co-caprolactone) (PLCL) capsular scaffolds containing the pro-angiogenic factor VEGF. After each modification step (i.e., amination and heparinization), the surface properties and morphology of scaffolds were characterized by ATR-FTIR and XPS spectroscopy, and by SEM and AFM. All modifications preserved the gross capsule morphology and maintained the open pore structure. Optimized aminolysis conditions decreased the Mw of PLCL only up to 10% while generating a sufficient number of NH2 groups required for the covalent immobilization of heparin. The heparin layer served as a VEGF reservoir with an in vitro VEGF release for at least four weeks. In vivo studies revealed that to obtain highly vascularized PLCL capsules (a) the optimal VEGF dose for the capsule was 50 μg and (b) the implantation time was four weeks when implanted into the greater omentum of Lewis rats; dense fibrous tissue accompanied by vessels completely infiltrated the scaffold and created sparse granulation tissue within the internal cavity of the capsule. The prepared pre-vascularized pouch enabled the islet graft survival and functioning for at least 50 days after islet transplantation. The proposed construct can be used to create a reliable pre-vascularized pouch for cell transplantation.
- MeSH
- bioinženýrství * MeSH
- experimentální diabetes mellitus chemicky indukované metabolismus patologie MeSH
- fyziologická neovaskularizace * MeSH
- injekce intraperitoneální MeSH
- krevní glukóza analýza MeSH
- krysa rodu rattus MeSH
- molekulární struktura MeSH
- polyestery chemie metabolismus MeSH
- potkani inbrední LEW MeSH
- streptozocin aplikace a dávkování MeSH
- tobolky chemie metabolismus MeSH
- transplantace Langerhansových ostrůvků * MeSH
- vaskulární endoteliální růstové faktory chemie metabolismus MeSH
- velikost částic MeSH
- zvířata MeSH
- Check Tag
- krysa rodu rattus MeSH
- mužské pohlaví MeSH
- zvířata MeSH
- Publikační typ
- časopisecké články MeSH
Amine-coated biodegradable materials based on synthetic polymers have a great potential for tissue remodeling and regeneration because of their excellent processability and bioactivity. In the present study, we have investigated the influence of various chemical compositions of amine plasma polymer (PP) coatings and the influence of the substrate morphology, represented by polystyrene culture dishes and polycaprolactone nanofibers (PCL NFs), on the behavior of vascular smooth muscle cells (VSMCs). Although all amine-PP coatings improved the initial adhesion of VSMCs, 7-day long cultivation revealed a clear preference for the coating containing about 15 at.% of nitrogen (CPA-33). The CPA-33 coating demonstrated the ideal combination of good water stability, a sufficient amine group content, and favorable surface wettability and morphology. The nanostructured morphology of amine-PP-coated PCL NFs successfully slowed the proliferation rate of VSMCs, which is essential in preventing restenosis of vascular replacements in vivo. At the same time, CPA-33-coated PCL NFs supported the continuous proliferation of VSMCs during 7-day long cultivation, with no significant increase in cytokine secretion by RAW 264.7 macrophages. The CPA-33 coating deposited on biodegradable PCL NFs therefore seems to be a promising material for manufacturing small-diameter vascular grafts, which are still lacking on the current market.
- MeSH
- aminy škodlivé účinky chemie imunologie farmakologie MeSH
- biokompatibilní potahované materiály škodlivé účinky chemie farmakologie MeSH
- buněčná adheze účinky léků imunologie MeSH
- fotoelektronová spektroskopie MeSH
- krevní plazma chemie imunologie MeSH
- krysa rodu rattus MeSH
- kultivované buňky MeSH
- makrofágy účinky léků metabolismus MeSH
- myocyty hladké svaloviny účinky léků metabolismus MeSH
- myši MeSH
- nanovlákna škodlivé účinky chemie MeSH
- polyestery chemie MeSH
- polymery škodlivé účinky chemie farmakologie MeSH
- povrchové vlastnosti účinky léků MeSH
- proliferace buněk účinky léků MeSH
- RAW 264.7 buňky MeSH
- svaly hladké cévní cytologie účinky léků růst a vývoj MeSH
- tkáňové podpůrné struktury škodlivé účinky chemie MeSH
- zvířata MeSH
- Check Tag
- krysa rodu rattus MeSH
- myši MeSH
- zvířata MeSH
- Publikační typ
- časopisecké články MeSH
Natural cosmetic products have recently re-emerged as a novel tool able to counteract skin aging and skin related damages. In addition, recently achieved progress in nanomedicine opens a novel approach yielding from combination of modern nanotechnology with traditional treatment for innovative pharmacotherapeutics. In the present study, we investigated the antiaging effect of a pretreatment with Myrtus communis natural extract combined with a polycaprolactone nanofibrous scaffold (NanoPCL-M) on skin cell populations exposed to UV. We set up a novel model of skin on a bioreactor mimicking a crosstalk between keratinocytes, stem cells and fibroblasts, as in skin. Beta-galactosidase assay, indicating the amount of senescent cells, and viability assay, revealed that fibroblasts and stem cells pretreated with NanoPCL-M and then exposed to UV are superimposable to control cells, untreated and unexposed to UV damage. On the other hand, cells only exposed to UV stress, without NanoPCL-M pretreatment, exhibited a significantly higher yield of senescent elements. Keratinocyte-based 3D structures appeared disjointed after UV-stress, as compared to NanoPCL-M pretreated samples. Gene expression analysis performed on different senescence associated genes, revealed the activation of a molecular program of rejuvenation in stem cells pretreated with NanoPCL-M and then exposed to UV. Altogether, our results highlight a future translational application of NanoPCL-M to prevent skin aging.
- MeSH
- exprese genu účinky léků MeSH
- fibroblasty účinky léků MeSH
- keratinocyty účinky léků MeSH
- kmenové buňky účinky léků MeSH
- kultivované buňky MeSH
- kůže účinky léků MeSH
- lidé MeSH
- Myrtus chemie MeSH
- nanovlákna chemie MeSH
- polyestery chemie MeSH
- proliferace buněk účinky léků MeSH
- rostlinné extrakty farmakologie MeSH
- stárnutí buněk účinky léků MeSH
- stárnutí kůže účinky léků MeSH
- ultrafialové záření škodlivé účinky MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
The ubiquity and character of thermophilic poly(butylene adipate-co-terephthalate) (PBAT)-degrading microorganisms in soils were investigated and compared to the process in an industrial composting plant. PBAT degraders were sought in 41 temperate zone soils. No mesophilic degraders were found by the employed method, but roughly 102 colony-forming units (CFUs) of thermophilic degraders per gram of soil were found in nine soils, and after an enrichment procedure, the PBAT-degrading consortia were isolated from 30 out of 41 soils. Thermophilic actinomycetes, Thermobispora bispora in particular, together with bacilli proved to be the key constituents of the isolated and characterized PBAT-degrading consortia, with bacilli comprising from about 30% to over 90% of the retrieved sequences. It was also shown that only consortia containing both constituents were able to decompose PBAT. For comparison, a PBAT film together with two types of PBAT/starch films were subjected to biodegradation in compost and the degrading microorganisms were analyzed. Bacilli and actinobacteria were again the most common species identified on pure PBAT film, especially at the beginning of biodegradation. Later, the composition of the consortia on all three tested materials became very similar and more diverse. Since waste containing PBAT-based materials is often intended to end up in composting plants, this study increases our confidence that thermophilic PBAT degraders are rather broadly present in the environment and the degradation of the material during the composting process should not be limited by the absence of specific microorganisms.
- MeSH
- Actinobacteria růst a vývoj izolace a purifikace metabolismus MeSH
- Bacillaceae růst a vývoj izolace a purifikace metabolismus MeSH
- biodegradace MeSH
- kompostování MeSH
- polyestery chemie MeSH
- půdní mikrobiologie MeSH
- RNA ribozomální 16S genetika MeSH
- Publikační typ
- časopisecké články MeSH
- srovnávací studie MeSH
Chronic wounds and their associated bacterial infections are major issues in modern health care systems. Therefore, antimicrobial resistance (AMR), treatment costs, and number of disability-adjusted life-years have gained more interest. Recently, photodynamic therapy emerged as an effective approach against resistant and naïve bacterial strains with a low probability of creating AMR. In this study, needleless electrospinning was used to produce an indocyanine green (ICG) loaded poly(d,l-lactide) nanofibrous mesh as a photoresponsive wound dressing. The non-woven mesh had a homogeneous nanofibrous structure and showed long-term hydrolytic stability at different pH values. The antimicrobial activity was tested against several bacterial strains, namely Staphylococcus saprophyticus subsp. bovis, Escherichia coli DH5 alpha, and Staphylococcus aureus subsp. aureus. Upon irradiation with a laser of a specific wavelength (λ = 810 nm), the bacterial viability was significantly reduced by 99.978% (3.66 log10), 99.699% (2.52 log10), and 99.977% (3.64 log10), respectively. The nanofibrous mesh showed good biocompatibility, which was confirmed by the proliferation of mouse fibroblasts (L929) on the surface and into deeper parts of the mesh. Furthermore, a favorable proangiogenic effect was observed in ovo using the chorioallantoic membrane assay. In general, it can be concluded that ICG loaded nanofibers as an innovative wound dressing represent a promising strategy against chronic wounds associated with skin infections.
- MeSH
- biokompatibilní materiály chemie farmakologie MeSH
- buněčné linie MeSH
- chorioalantoická membrána krevní zásobení účinky léků MeSH
- Escherichia coli účinky léků růst a vývoj MeSH
- fibroblasty cytologie účinky léků MeSH
- fotochemoterapie MeSH
- indokyanová zeleň chemie farmakologie MeSH
- mikrobiální viabilita účinky léků MeSH
- myši MeSH
- nanovlákna MeSH
- obvazy MeSH
- polyestery chemie MeSH
- proliferace buněk účinky léků MeSH
- Staphylococcus aureus účinky léků růst a vývoj MeSH
- Staphylococcus saprophyticus účinky léků růst a vývoj MeSH
- zvířata MeSH
- Check Tag
- myši MeSH
- zvířata MeSH
- Publikační typ
- časopisecké články MeSH
