Urolithiasis is a frequent and in many cases serious disease. Proper analysis of kidney stone composition is crucial for appropriate treatment and prevention of disease recurrence. In this work, scanning electron microscopy (SEM) coupled with energy-dispersive spectroscopy was applied for a study of 30 samples covering the most common types of human kidney stones. The results are analyzed and evaluated in terms of applicability of the method for both routine kidney stone analysis as well as collecting of specific data. The method provides complex information about studied samples including morphology of the stones and of the present crystals or their aggregates. It also brings information on elemental composition of the phases. After application of standardization, quantitative microanalysis with detection limits of 400 ppm (Mg, P, S, Cl, K, Ca), 500 ppm (Na) and 1200 ppm (F) was obtained. Compositional mapping with EDS shows the elemental distribution within a sample. This study demonstrated that information on morphology and chemistry acquired by these methods was highly reliable for identification of phases, even when present in small amounts. It provided information on kidney stone structure, relationships between phases, major and minor element content, and variations in chemical composition related to the growth of the stones. SEM represents a powerful tool in urinary stone analysis, since a single facility can produce a wide spectrum of information. It can be suggested as a basic method used for routine urinary stone identification, whilst bringing additional detailed information that cannot be obtained by other methods.
High concentrations of airborne asbestos in the ambient air are still a serious problem of air quality in numerous localities around the world. Since 2002, elevated concentrations of asbestos minerals of unknown origin have been detected in the ambient air of Pilsen, Czech Republic. To determine the asbestos fibre sources in this urban air, a systematic study was conducted. First, 14 bulk dust samples were collected in Pilsen at nine localities, and 6 bulk samples of construction aggregates for gravel production were collected in a quarry in the Pilsen-Litice district. The quarry is the largest quarry in the Pilsen region and the closest quarry to the built-up urban area. X-ray diffraction of the asbestos minerals revealed that monoclinic amphibole (MA, namely actinolite based on subsequent SEM-EDX analysis) in the bulk samples accounted for < 1-33% of the mass and that the highest values were found in the bulk dust samples from the railway platform of the Pilsen main railway station. Simultaneously, 24-h samples of airborne particulate matter (PM) at three localities in Pilsen were collected. Actinolite was identified in 40% of the PM samples. The relationship between the meteorology and presence of actinolite in the 24 PM10 samples was not proven, probably due to the long sampling integration time. Therefore, highly time-and-size-resolved PM sampling was performed. Second, sampling of size-segregated aerosols and measurements of the wind speed (WS), wind direction (WD), precipitation (P) and hourly PM10, PM2.5 and PM1 were conducted in a suburban locality near the quarry in two monthly highly time-resolved periods (30, 60, 120 min). Three/eight PM size fractions were sampled by a Davis Rotating-drum Uniform-size-cut Monitor (3/8DRUM) and analysed for the presences of asbestos fibres by scanning electron microscopy with energy dispersive x-ray spectroscopy (SEM-EDX). Asbestos fibre detection in highly time-resolved PM samples and current WD and WS determination allows the apportionment directionality of asbestos fibre sources. The number of critical actinolite asbestos fibres (length ≥ 5 μm and width < 3 μm, 3:1) increased with the PM1-10/PM10 and PM2.5-10/PM10 ratios, WS > 2 m s-1 and precipitation < 1 mm. Additionally, the number of critical actinolite asbestos fibres was not related to a specific WD. Therefore, we conclude that the sources of airborne critical actinolite asbestos fibres in Pilsen's urban area are omnipresent. Frequent use of construction aggregates and gravel from the metamorphic spilite quarries in the Pilsen region and in many localities around the urban area is a plausible explanation for the omnipresence of the critical actinolite asbestos fibres concentration in Pilsen's ambient air. Mitigation strategies to reduce the concentrations of critical actinolite asbestos fibres must be developed. Continuous monitoring and performing SEM-EDX analysis of highly time-and-size-resolved PM samples, correlated with fast changing WS and WD, seems to be a strong tool for efficiently controlling the mitigation strategies of critical actinolite asbestos fibres.
- MeSH
- aerosoly analýza MeSH
- azbest chemie MeSH
- látky znečišťující vzduch analýza MeSH
- mikroskopie elektronová rastrovací MeSH
- monitorování životního prostředí metody MeSH
- pevné částice chemie MeSH
- prach analýza MeSH
- velikost částic MeSH
- znečištění ovzduší MeSH
- Publikační typ
- časopisecké články MeSH
- Geografické názvy
- Česká republika MeSH
Increasing amounts of impurities (especially As) in Cu ores have aggravated the problem of flue dust generation in recent years. As an example from a smelter processing As-rich Cu ores, we characterized a flue dust particularly rich in As (>50 wt%) to understand its mineralogy and pH-dependent leaching behavior, with special emphasis on binding, release and solubility controls of inorganic contaminants (As, Bi, Cd, Cu, Pb, Sb, Zn). Whereas arsenolite (As2O3) was the major host for As and Sb, other contaminants were bound in sulfides, arsenates, alloys and slag-like particles. The EU regulatory leaching test (EN 12457-2) indicated that leached As, Cd, Sb and Zn significantly exceeded the limit values for landfills accepting hazardous waste. The pH-dependent leaching test (CEN/TS 14997) revealed that As, Sb and Pb exhibited the greatest leaching at pH 11-12, whereas Cd, Cu and Zn were leached most under acidic condition (pH 3) and Bi leaching was pH-independent. Mineralogical investigation of leached residue coupled with geochemical modeling confirmed that newly formed Ca, Pb and Ca-Pb arsenates (mimetite, Pb5(AsO4)3Cl) partly control the release of As and other contaminants under circumneutral and alkaline conditions and will be of key importance for the fate of smelter-derived contamination in soils or when stabilization technology is employed.
