The paper presents a validation of novel multichannel ballistocardiography (BCG) measuring system, enabling heartbeat detection from information about movements during myocardial contraction and dilatation of arteries due to blood expulsion. The proposed methology includes novel sensory system and signal processing procedure based on Wavelet transform and Hilbert transform. Because there are no existing recommendations for BCG sensor placement, the study focuses on investigation of BCG signal quality measured from eight different locations within the subject's body. The analysis of BCG signals is primarily based on heart rate (HR) calculation, for which a J-wave detection based on decision-making processes was used. Evaluation of the proposed system was made by comparing with electrocardiography (ECG) as a gold standard, when the averaged signal from all sensors reached HR detection sensitivity higher than 95% and two sensors showed a significant difference from ECG measurement.

• MeSH
• Ballistocardiography * methods   MeSH
• Adult MeSH
• Electrocardiography * methods   MeSH
• Humans MeSH
• Young Adult MeSH
• Signal Processing, Computer-Assisted MeSH
• Heart Rate * physiology   MeSH
• Wavelet Analysis MeSH
• Check Tag
• Adult MeSH
• Humans MeSH
• Young Adult MeSH
• Male MeSH
• Female MeSH
• Publication type
• Journal Article MeSH
• Comparative Study MeSH

In this paper, the concept design of intelligent technical textile blocks implemented with optical fibers that include fiber Bragg gratings for strain and temperature sensing is briefly introduced. In addition to the main design of the system, a design of measurement blocks with integrated fiber Bragg grating elements for strain measurement is also presented. In the basic measurement, the created textile block was tested for deformation sensitivity when a load was applied. Moreover, a unique robust and low profile connector was designed, created and verified. The fibers are terminated with GRIN lenses, allowing easy manipulation and completion of the connector in the field, with an average insertion loss of 5.5 dB.

• Keywords
• FBG, intelligent textile, strain, temperature,
• Publication type
• Journal Article MeSH

This article presents a solution for continuous monitoring of both respiratory rate (RR) and heart rate (HR) inside Magnetic Resonance Imaging (MRI) environments by a novel ballistocardiography (BCG) fiber-optic sensor. We designed and created a sensor based on the Fiber Bragg Grating (FBG) probe encapsulated inside fiberglass (fiberglass is a composite material made up of glass fiber, fabric, and cured synthetic resin). Due to this, the encapsulation sensor is characterized by very small dimensions (30 × 10 × 0.8 mm) and low weight (2 g). We present original results of real MRI measurements (conventionally most used 1.5 T MR scanner) involving ten volunteers (six men and four women) by performing conventional electrocardiography (ECG) to measure the HR and using a Pneumatic Respiratory Transducer (PRT) for RR monitoring. The acquired sensor data were compared against real measurements using the objective Bland⁻Altman method, and the functionality of the sensor was validated (95.36% of the sensed values were within the ±1.96 SD range for the RR determination and 95.13% of the values were within the ±1.96 SD range for the HR determination) by this means. The accuracy of this sensor was further characterized by a relative error below 5% (4.64% for RR and 4.87% for HR measurements). The tests carried out in an MRI environment demonstrated that the presence of the FBG sensor in the MRI scanner does not affect the quality of this imaging modality. The results also confirmed the possibility of using the sensor for cardiac triggering at 1.5 T (for synchronization and gating of cardiovascular magnetic resonance) and for cardiac triggering when a Diffusion Weighted Imaging (DWI) is used.

• Keywords
• MRI-compatible, ballistocardiography (BCG), cardiac triggering, fiber bragg grating (FBG), fiberglass, heart rate (HR), respiratory rate (RR),
• MeSH
• Ballistocardiography methods   MeSH
• Respiratory Rate physiology   MeSH
• Electrocardiography MeSH
• Humans MeSH
• Magnetic Resonance Imaging MeSH
• Heart physiology   MeSH
• Heart Rate physiology   MeSH
• Fiber Optic Technology methods   MeSH
• Check Tag
• Humans MeSH
• Male MeSH
• Female MeSH
• Publication type
• Journal Article MeSH