As was shown in the previous part of the study, windshields are an important part of the passive safety means of modern low-floor trams with an extraordinary effect on pedestrian safety in a pedestrian-tram collisions. Therefore, maximum attention must be paid to the definition of tram windshield characteristics. This article describes a windshield crash test, from which data are obtained to verify the feasibility of the applied computational approaches. A developed analytical model is utilised for a simple description of the energy balance during collision with an illustrative definition of the important parameters of laminated glass as well as their clear physical interpretations. The finite element analysis (FEA) performed in Ansys software using two versions of material definition, namely a simpler (*MAT_ELASTIC with nonlocal failure criterion) and a more complex (*MAT_GLASS with brittle stress-state-dependent failure) material model, which are presented as suitable for obtaining a detailed description of the shattering process of laminated glass, which can also be used effectively in windshield engineering.

• Keywords
• Ansys LS-DYNA, Ansys optiSLang, crash test, front face, head injury criterion, impact test, laminated glass, model, pedestrian, safety, tram, windshield,
• Publication type
• Journal Article MeSH

This article represents the first paper in a two-part series dealing with safety during tram-pedestrian collisions. This research is dedicated to the safety of trams for pedestrians during collisions and is motivated by the increased number of lethal cases. The first part of this paper includes an overview of tram face development from the earliest designs to the current ones in use and, at the same time, provides a synopsis and explanation of the technical context, including a link to current and forthcoming legislation. The historical design development can be characterised by three steps, from an almost vertical front face, to leaned and pointed shapes, to the current inclined low-edged windshield without a protruding coupler. However, since most major manufacturers now export their products worldwide and customisation is only of a technically insignificant nature, our conclusions are generalisable (supported by the example of Berlin). The most advantageous shape of the tram's front, minimising the effects on pedestrians in all collision phases, has evolved rather spontaneously and was unprompted, and it is now being built into the European Commission regulations. The goal of the second part of this paper is to conduct a series of tram-pedestrian collisions with a focus on the frontal and side impacts using a crash test dummy (anthropomorphic test device-ATD). Four tram types approaching the collision at four different impact speeds (5 km/h, 10 km/h, 15 km/h, and 20 km/h) were used. The primary outcome variable was the resultant head acceleration. The risk and severity of possible head injuries were assessed using the head injury criterion (HIC15) and its linkage to the injury level on the Abbreviated Injury Scale (AIS). The results showed increasing head impacts with an increasing speed for all tram types and collision scenarios. Higher values of head acceleration were reached during the frontal impact (17-124 g) compared to the side one (2-84 g). The HIC15 values did not exceed the value of 300 for any experimental setting, and the probability of AIS4+ injuries did not exceed 10%. The outcomes of tram-pedestrian collisions can be influenced by the ATD's position and orientation, the impact speed and front-end design of trams, and the site of initial contact.

• Keywords
• collision, crash test, front face design, head injury criterion, pedestrian, safety, tram, windshield,
• MeSH
• Pedestrians * MeSH
• Walking MeSH
• Accidents, Traffic MeSH
• Craniocerebral Trauma * MeSH
• Humans MeSH
• Motor Vehicles MeSH
• Wounds and Injuries * MeSH
• Check Tag
• Humans MeSH
• Publication type
• Journal Article MeSH
• Review MeSH