Automated sequential injection (SIA) method for chemiluminescence (CL) determination of nonsteroidal anti-inflammatory drug indomethacin (I) was devised. The CL radiation was emitted in the reaction of I (dissolved in aqueous 50% v/v ethanol) with intermediate reagent tris(2,2'-bipyridyl)ruthenium(III) (Ru(bipy)(3)(3+)) in the presence of acetate. The Ru(bipy)(3)(3+) was generated on-line in the SIA system by the oxidation of 0.5mM tris(2,2'-bipyridyl)ruthenium(II) (Ru(bipy)(3)(2+)) with Ce(IV) ammonium sulphate in diluted sulphuric acid. The optimum sequence, concentrations, and aspirated volumes of reactant zones were: 15 mM Ce(IV) in 50mM sulphuric acid 41 microL, 0.5 mM Ru(bipy)(3)(2+) 30 microL, 0.4M Na acetate 16 microL and I sample 15 microL; the flow rates were 60 microLs(-1) for the aspiration into the holding coil and 100 microLs(-1) for detection. Calibration curve relating the intensity of CL (peak height of the transient CL signal) to concentration of I was curvilinear (second order polynomial) for 0.1-50 microM I (r=0.9997; n=9) with rectilinear section in the range 0.1-10 microM I (r=0.9995; n=5). The limit of detection (3sigma) was 0.05 microM I. Repeatability of peak heights (R.S.D., n=10) ranged between 2.4% (0.5 microM I) and 2.0% (7 microM I). Sample throughput was 180 h(-1). The method was applied to determination of 1 to 5% of I in semisolid dosage forms (gels and ointments). The results compared well with those of UV spectrophotometric method.

Department of Analytical Chemistry Faculty of Pharmacy Charles University Heyrovskeho 1203 CZ 500 05 Hradec Kralove Czech Republic

References provided by Crossref.org