Lately, the need for three-dimensional (3D) cell culture has been recognized in order to closely mimic the organization of native tissues. Thus, 3D scaffolds started to be employed to facilitate the 3D cell organization and enable the artificial tissue formation for the emerging tissue engineering applications. 3D scaffolds can be prepared by various techniques, each with certain advantages and disadvantages. Decellularization is an easy method based on removal of cells from native tissue sample, yielding extracellular matrix (ECM) scaffold with preserved architecture and bioactivity. This chapter provides a detailed protocol for decellularization of pig lung and also some basic assays for evaluation of its effectivity, such as determination of DNA content and histological verification of the selected ECM components. Such decellularized scaffold can subsequently be used for various tissue engineering applications, for example, for recellularization with cells of interest, for natural ECM hydrogel preparation, or as a bioink for 3D bioprinting.

• MeSH
• extracelulární matrix MeSH
• hydrogely MeSH
• plíce * MeSH
• prasata MeSH
• tkáňové inženýrství * metody   MeSH
• tkáňové podpůrné struktury * MeSH
• zvířata MeSH
• Check Tag
• zvířata MeSH
• Publikační typ
• časopisecké články MeSH

Stereolithography-assisted fabrication of hydrogels of carboxybetaine methacrylamide (CBMAA) and a α,ω-methacrylate poly(d,l-lactide-block-ethylene glycol-block- d,l-lactide) (MA-PDLLA-PEG-PDLLA-MA) telechelic triblock macromer is presented. This technique allows printing complex structures with gyroid interconnected porosity possessing extremely high specific area. Hydrogels are characterized by infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and laser scanning confocal microscopy (LSCM). The copolymerization with zwitterionic comonomer leads hydrogels with high equilibrium water content (EWC), up to 700% while maintaining mechanical robustness. The introduction of carboxybetaine yields excellent resistance to nonspecific protein adsorption while providing a facile way for specific biofunctionalization with a model protein, fluorescein isothiocyanate labeled bovine serum albumin (BSA). The homogeneous protein immobilization across the hydrogel pores prove the accessibility to the innermost pore volumes. The remarkably low protein adsorption combined with the interconnected nature of the porosity allowing fast diffusion of nutrient and waste product and the mimicry of bone trabecular, makes the hydrogels presented here highly attractive for tissue engineering.

• MeSH
• hydrogely chemie   MeSH
• methakryláty chemie   MeSH
• poréznost MeSH
• skot MeSH
• tkáňové inženýrství * MeSH
• tkáňové podpůrné struktury chemie   MeSH
• zvířata MeSH
• Check Tag
• skot MeSH
• zvířata MeSH
• Publikační typ
• časopisecké články MeSH
• práce podpořená grantem MeSH

Poly(N,N-diethylacrylamide) (PDEAAm) hydrogel scaffolds were prepared by radical copolymerization of N,N-diethylacrylamide (DEAAm), N,N'-methylenebisacrylamide and methacrylic acid in the presence of (NH₄)₂SO₄ or NaCl. The hydrogels were characterized by low-vacuum scanning electron microscopy in the water-swollen state, water and cyclohexane regain, and by mercury porosimetry. The pentapeptide, YIGSR-NH₂, was immobilized on the hydrogel. Human embryonic stem cells (hESCs) were cultured with the hydrogels to test their biocompatibility. The results suggest that the PDEAAm hydrogel scaffolds are nontoxic and support hESC attachment and proliferation, and that interconnected pores of the scaffolds are important for hESC cultivation. Immobilization of YIGSR-NH₂ pentapeptide on the PDEAAm surface improved both adhesion and growth of hESCs compared with the unmodified hydrogel. The YIGSR-NH₂-modified PDEAAm hydrogels may be a useful tool for tissue-engineering purposes.

• MeSH
• akrylamidy chemie   MeSH
• buněčné linie MeSH
• embryonální kmenové buňky cytologie   MeSH
• hydrogely chemie   MeSH
• lidé MeSH
• myši MeSH
• oligopeptidy chemie   MeSH
• polymery chemie   MeSH
• proliferace buněk MeSH
• tkáňové inženýrství metody   MeSH
• tkáňové podpůrné struktury MeSH
• zvířata MeSH
• Check Tag
• lidé MeSH
• myši MeSH
• zvířata MeSH
• Publikační typ
• časopisecké články MeSH
• práce podpořená grantem MeSH

Fabrication of porous and biologically inspired biomaterials that mimic the formation of microstructural structures of nacre in the form of calcite (CaCO3) and evaluation of the biocompatibility of such organic-inorganic composite scaffold for bone tissue engineering, are focus of this paper. Nacre's self-assembly characteristics are concerned about the development of calcite filled biomineralized scaffold following the nature based biomineralization process and biomimetic applications. The PVP-CMC hydrogel film, comprised of PVP:0.2, CMC:0.8, PEG:1.0, Agar:2.0, Glycerene:1.0 and water:95.0 w/v%; acts as catalyst and template for the nucleation and growth of the inorganic CaCO3 within the scaffold. The PVP-CMC hydrogel (in the dry state) was immersed in ionic solutions (g/100 ml) of Na2CO3 and CaCl2·H2O in different concentrations sets i.e. Set-1: 10.50/14.70; Set-2: 5.25/7.35; Set-3: 4.20/5.88; Set-4: 2.10/2.94; Set-5: 1.05/1.47, Set-6: 0.55/0.55 for 90 min. As a result, "PVP-CMC-CaCO3" hydrogel scaffold was fabricated having bio-inspired structural and functional properties. Cell proliferation and cell viability were examined until 7 days in the presence of "PVP-CMC-CaCO3" scaffolds using permanent cell lines MG63 (human osteosarcoma), L929 (murine fibroblasts) as well as cultures from mouse bone explants (CC-MBE), confirmed that the said hydrogel scaffolds are biocompatible. But, from mechanical strength as well as biocompatibility point of view, scaffolds prepared in Set-1 to 3 ionic solutions were superior. In conclusion, these three calcite filled hydrogel scaffolds are recommended and can be used for osseointegration.

• MeSH
• biokompatibilní materiály chemie   MeSH
• buněčné linie MeSH
• difrakce rentgenového záření MeSH
• hydrogely chemie   MeSH
• mikroskopie elektronová rastrovací MeSH
• myši MeSH
• osteointegrace fyziologie   MeSH
• spektroskopie infračervená s Fourierovou transformací MeSH
• tkáňové inženýrství metody   MeSH
• tkáňové podpůrné struktury chemie   MeSH
• viabilita buněk fyziologie   MeSH
• zvířata MeSH
• Check Tag
• myši MeSH
• zvířata MeSH
• Publikační typ
• časopisecké články MeSH

The principal focus of this work is the in-depth analysis of the biological efficiency of inorganic calcium-filled bacterial cellulose (BC) based hydrogel scaffolds for their future use in bone tissue engineering/bioengineering. Inorganic calcium was filled in the form of calcium phosphate (β-tri calcium phosphate (β-TCP) and hydroxyapatite (HA)) and calcium carbonate (CaCO₃). The additional calcium, CaCO₃ was incorporated following in vitro bio-mineralization. Cell viability study was performed with the extracts of BC based hydrogel scaffolds: BC-PVP, BC-CMC; BC-PVP-β-TCP/HA, BC-CMC-β-TCP/HA and BC-PVP-β-TCP/HA-CaCO₃, BC-CMC-β-TCP/HA-CaCO₃; respectively. The biocompatibility study was performed with two different cell lines, i.e., human fibroblasts, Lep-3 and mouse bone explant cells. Each hydrogel scaffold has facilitated notable growth and proliferation in presence of these two cell types. Nevertheless, the percentage of DNA strand breaks was higher when cells were treated with BC-CMC based scaffolds i.e., BC-CMC-β-TCP/HA and BC-CMC-β-TCP/HA-CaCO₃. On the other hand, the apoptosis of human fibroblasts, Lep-3 was insignificant in BC-PVP-β-TCP/HA. The scanning electron microscopy confirmed the efficient adhesion and growth of Lep-3 cells throughout the surface of BC-PVP and BC-PVP-β-TCP/HA. Hence, among all inorganic calcium filled hydrogel scaffolds, 'BC-PVP-β-TCP/HA' was recommended as an efficient tissue engineering scaffold which could facilitate the musculoskeletal (i.e., bone tissue) engineering/bioengineering.

• MeSH
• celulosa chemie   MeSH
• hydrogely chemie   MeSH
• hydroxyapatit chemie   MeSH
• kosti a kostní tkáň cytologie   MeSH
• lidé MeSH
• myši MeSH
• tkáňové inženýrství metody   MeSH
• tkáňové podpůrné struktury chemie   MeSH
• vápník chemie   MeSH
• zvířata MeSH
• Check Tag
• lidé MeSH
• myši MeSH
• zvířata MeSH
• Publikační typ
• časopisecké články MeSH

PURPOSE OF THE STUDY: The preclinical study aimed to compare the healing of segmental bone defects treated with biodegradable hyaluronic acid and tricalcium phosphate-based hydrogel with the established autologous spongioplasty. Another aim was to evaluate the hydrogel as a scaffold for osteoinductive growth factor of bone morphogenetic protein-2 (BMP-2) and stem cells. MATERIAL AND METHODS: The study was conducted in an in vivo animal model. A standardized rabbit model of a 15 mm long segmental bone defect of left radius was used. A total of 40 animals were divided into 5 groups of 8 individuals. In the KO- (negative control) group, the created defect was left to heal spontaneously. In the KO+ (positive control) group, the defect was filled with morselized bone autograft prepared from the resected segment. In the study group A, the defect was filled with hydrogel based on hyaluronic acid derivative and tricalcium phosphate. In the study group B, the defect was filled with hydrogel based on hyaluronic acid derivative, tricalcium phosphate and bone marrow aspirate. In the study group C, the defect was filled with hydrogel based on hyaluronic acid derivative, tricalcium phosphate, bone marrow aspirate and BMP-2. Healing was assessed using radiographs at 1, 6, and 12 weeks postoperatively and histology specimens were collected at 16 weeks postoperatively. RESULTS: Altogether 35 rabbits survived (KO- 7, KO+ 7, A 7, B 6, C 8) until the end of the study. As concerns the radiographic assessment, the best results were achieved by the groups KO+ and C, where new bone formation across the entire width of the bone defect was clearly seen at 6 and 12 weeks and the osteotomy line was completely healed too. At 12 weeks, complete bone remodelling was observed in all animals in the group KO+, whereas in the group C, bone remodelling was fully completed in 5 animals and partially completed in 3 animals. In terms of histological assessment, however, the best results were achieved by the group C, where the bone defect was completely remodelled into lamellar bone in 7 specimens, while in 1 specimen it healed with bony callus formation. In the group KO+, the defect was healed in 4 specimens by cartilaginous callus with loci of remodelling into bony callus, in 2 specimens the bony callus was predominant with cartilaginous callus areas, and only one defect was completely remodelled into lamellar bone. DISCUSSION: Compared to autografts that manifest osteogenic, osteoinductive and osteoconductive properties, the biodegradable hyaluronic acid and tricalcium phosphate-based hydrogel has osteoconductive properties only. Thus, it was also tested in our study as a scaffold for bone marrow cells and BMP-2 osteoinductive growth factor. Thanks to its semi-liquid properties, the biodegradable hyaluronic acid and tricalcium phosphate-based hydrogel is a promising material for use in 3D printing. CONCLUSIONS: The preclinical study in an in vivo animal model confirmed the beneficial effect of the biodegradable hyaluronic acid and tricalcium phosphate-based hydrogel on the healing of critical-size segmental bone defects. Better healing of these defects was also confirmed for filling composed of hydrogel and BMP-2 osteoinductive growth factor. The benefit of bone marrow aspirate mixed with hydrogel was not confirmed. KEY WORDS: bone defect, non-union, rabbit, hyaluronic acid, calcium phosphate, stem cells, BMP-2, scaffold, bone healing, spongioplasty.

• MeSH
• fosforečnany vápenaté * farmakologie   MeSH
• hydrogely farmakologie   MeSH
• kostní morfogenetický protein 2 * MeSH
• králíci MeSH
• kyselina hyaluronová * farmakologie   MeSH
• modely nemocí na zvířatech MeSH
• radius chirurgie   zranění   MeSH
• regenerace kostí účinky léků   MeSH
• tkáňové podpůrné struktury * MeSH
• zvířata MeSH
• Check Tag
• králíci MeSH
• zvířata MeSH
• Publikační typ
• anglický abstrakt MeSH
• časopisecké články MeSH

Hydrogels prepared from a mixture of fibrin and high-molecular weight (MW) hyaluronic acid (HA) were found to be suitable scaffolds for chondrocyte seeding and pig knee cartilage regeneration. Collagen in the hydrogels is not necessary for the formation of biomechanically stable tissue. Regenerated cartilage showed very good biomechanical and histological properties only 6 months after implantation. Notably, the quality of the healing process was dependent on the initial chondrocyte concentration of the scaffolds. These experiments were performed according to good laboratory practice (GLP).

• MeSH
• biokompatibilní materiály chemie   MeSH
• biomechanika MeSH
• chondrocyty cytologie   fyziologie   MeSH
• chondrogeneze MeSH
• chrupavka fyziologie   chirurgie   MeSH
• fibrin chemie   MeSH
• hydrogely MeSH
• kyselina hyaluronová chemie   MeSH
• miniaturní prasata MeSH
• prasata MeSH
• protézy a implantáty MeSH
• regenerace MeSH
• testování materiálů MeSH
• tkáňové inženýrství MeSH
• tkáňové podpůrné struktury chemie   MeSH
• zvířata MeSH
• Check Tag
• mužské pohlaví MeSH
• zvířata MeSH
• Publikační typ
• časopisecké články MeSH
• práce podpořená grantem MeSH

BACKGROUND: Chronic lymphocytic leukemia (CLL) is a common adult leukemia characterized by the accumulation of neoplastic mature B cells in blood, bone marrow, lymph nodes, and spleen. The disease biology remains unresolved in many aspects, including the processes underlying the disease progression and relapses. However, studying CLL in vitro poses a considerable challenge due to its complexity and dependency on the microenvironment. Several approaches are utilized to overcome this issue, such as co-culture of CLL cells with other cell types, supplementing culture media with growth factors, or setting up a three-dimensional (3D) culture. Previous studies have shown that 3D cultures, compared to conventional ones, can lead to enhanced cell survival and altered gene expression. 3D cultures can also give valuable information while testing treatment response in vitro since they mimic the cell spatial organization more accurately than conventional culture. METHODS: In our study, we investigated the behavior of CLL cells in two types of material: (i) solid porous collagen scaffolds and (ii) gel composed of carboxymethyl cellulose and polyethylene glycol (CMC-PEG). We studied CLL cells' distribution, morphology, and viability in these materials by a transmitted-light and confocal microscopy. We also measured the metabolic activity of cultured cells. Additionally, the expression levels of MYC, VCAM1, MCL1, CXCR4, and CCL4 genes in CLL cells were studied by qPCR to observe whether our novel culture approaches lead to increased adhesion, lower apoptotic rates, or activation of cell signaling in relation to the enhanced contact with co-cultured cells. RESULTS: Both materials were biocompatible, translucent, and permeable, as assessed by metabolic assays, cell staining, and microscopy. While collagen scaffolds featured easy manipulation, washability, transferability, and biodegradability, CMC-PEG was advantageous for its easy preparation process and low variability in the number of accommodated cells. Both materials promoted cell-to-cell and cell-to-matrix interactions due to the scaffold structure and generation of cell aggregates. The metabolic activity of CLL cells cultured in CMC-PEG gel was similar to or higher than in conventional culture. Compared to the conventional culture, there was (i) a lower expression of VCAM1 in both materials, (ii) a higher expression of CCL4 in collagen scaffolds, and (iii) a lower expression of CXCR4 and MCL1 (transcript variant 2) in collagen scaffolds, while it was higher in a CMC-PEG gel. Hence, culture in the material can suppress the expression of a pro-apoptotic gene (MCL1 in collagen scaffolds) or replicate certain gene expression patterns attributed to CLL cells in lymphoid organs (low CXCR4, high CCL4 in collagen scaffolds) or blood (high CXCR4 in CMC-PEG).

• MeSH
• buněčné kultury metody   MeSH
• chronická lymfatická leukemie * patologie   metabolismus   MeSH
• gely chemie   MeSH
• kolagen * chemie   farmakologie   MeSH
• lidé MeSH
• polyethylenglykoly * chemie   MeSH
• receptory CXCR4 metabolismus   MeSH
• sodná sůl karboxymethylcelulosy * chemie   farmakologie   MeSH
• techniky 3D buněčné kultury metody   MeSH
• tkáňové podpůrné struktury * chemie   MeSH
• viabilita buněk účinky léků   MeSH
• Check Tag
• lidé MeSH
• Publikační typ
• časopisecké články MeSH

The structural properties of microfiber meshes made from poly(2-hydroxyethyl methacrylate) (PHEMA) were found to significantly depend on the chemical composition and subsequent cross-linking and nebulization processes. PHEMA microfibres showed promise as scaffolds for chondrocyte seeding and proliferation. Moreover, the peak liposome adhesion to PHEMA microfiber scaffolds observed in our study resulted in the development of a simple drug anchoring system. Attached foetal bovine serum-loaded liposomes significantly improved both chondrocyte adhesion and proliferation. In conclusion, fibrous scaffolds from PHEMA are promising materials for tissue engineering and, in combination with liposomes, can serve as a simple drug delivery tool.

• MeSH
• biokompatibilní materiály chemie   MeSH
• buněčná adheze MeSH
• chondrocyty cytologie   MeSH
• fluorescenční mikroskopie metody   MeSH
• konfokální mikroskopie metody   MeSH
• lékové transportní systémy MeSH
• liposomy chemie   MeSH
• nosiče léků chemie   MeSH
• polyhydroxyethylmethakrylát chemie   MeSH
• polymery chemie   MeSH
• proliferace buněk MeSH
• racionální návrh léčiv MeSH
• reagencia zkříženě vázaná chemie   MeSH
• skot MeSH
• tkáňové inženýrství metody   MeSH
• tkáňové podpůrné struktury chemie   MeSH
• zvířata MeSH
• Check Tag
• skot MeSH
• zvířata MeSH
• Publikační typ
• časopisecké články MeSH
• práce podpořená grantem MeSH

Non-woven textile mesh from polyglycolic acid (PGA) was found as a proper material for chondrocyte adhesion but worse for their proliferation. Neither hyaluronic acid nor chitosan nor polyvinyl alcohol (PVA) increased chondrocyte adhesion. However, chondrocyte proliferation suffered from acidic byproducts of PGA degradation. However, the addition of PVA and/or chitosan into a wet-laid non-woven textile mesh from PGA improved chondrocyte proliferation seeded in vitro on the PGA-based composite scaffold namely due to a diminished acidification of their microenvironment. This PVA/PGA composite mesh used in combination with a proper hydrogel minimized the negative effect of PGA degradation without dropping positive parameters of the PGA wet-laid non-woven textile mesh. In fact, presence of PVA and/or chitosan in the PGA-based wet-laid non-woven textile mesh even advanced the PGA-based wet-laid non-woven textile mesh for chondrocyte seeding and artificial cartilage production due to a positive effect of PVA in such a scaffold on chondrocyte proliferation.

• MeSH
• buněčná adheze MeSH
• buněčné dělení MeSH
• chondrocyty cytologie   MeSH
• chrupavka cytologie   MeSH
• financování organizované MeSH
• konfokální mikroskopie MeSH
• králíci MeSH
• kyselina hyaluronová MeSH
• kyselina polyglykolová MeSH
• PEG-DMA hydrogel MeSH
• polyvinylalkohol MeSH
• techniky tkáňových kultur metody   MeSH
• textilie MeSH
• tkáňové podpůrné struktury MeSH
• voda MeSH
• zvířata MeSH
• Check Tag
• králíci MeSH
• zvířata MeSH