-
Je něco špatně v tomto záznamu ?
Non-invasive diagnostic system and its opto-mechanical probe for combining confocal Raman spectroscopy and optical coherence tomography
J. Klemes, A. Kotzianova, M. Pokorny, P. Mojzes, J. Novak, L. Sukova, J. Demuth, J. Vesely, L. Sasek, V. Velebny,
Jazyk angličtina Země Německo
Typ dokumentu časopisecké články
PubMed
28464557
DOI
10.1002/jbio.201600284
Knihovny.cz E-zdroje
- MeSH
- mechanické jevy * MeSH
- optická koherentní tomografie přístrojové vybavení metody MeSH
- Ramanova spektroskopie přístrojové vybavení metody MeSH
- software MeSH
- systémová integrace MeSH
- Publikační typ
- časopisecké články MeSH
Non-invasive optical diagnostic methods allow important information about studied systems to be obtained in a non-destructive way. Complete diagnosis requires information about the chemical composition as well as the morphological structure of a sample. We report on the development of an opto-mechanical probe that combines Raman spectroscopy (RS) and optical coherence tomography (OCT), two methods that provide all the crucial information needed for a non-invasive diagnosis. The aim of this paper is to introduce the technical design, construction and optimization of a dual opto-mechanical probe combining two in-house developed devices for confocal RS and OCT. The unique benefit of the probe is a gradual acquisition of OCT and RS data, which allows to use the acquired OCT images to pinpoint locations of interest for RS measurements. The parameters and the correct functioning of the probe were verified by RS scanning of various samples (silicon wafer and ex vivo tissue) based on their OCT images - lateral as well as depth scanning was performed. Both the OCT and RS systems were developed, optimized and tested with the ultimate aim of verifying the functionality of the probe. Picture: Schematic illustration and visualization of the developed RS-OCT probe.
Contipro a s R and D Department CZ 56102 Dolni Dobrouc Czech Republic
Citace poskytuje Crossref.org
- 000
- 00000naa a2200000 a 4500
- 001
- bmc18025055
- 003
- CZ-PrNML
- 005
- 20180716115832.0
- 007
- ta
- 008
- 180709s2017 gw f 000 0|eng||
- 009
- AR
- 024 7_
- $a 10.1002/jbio.201600284 $2 doi
- 035 __
- $a (PubMed)28464557
- 040 __
- $a ABA008 $b cze $d ABA008 $e AACR2
- 041 0_
- $a eng
- 044 __
- $a gw
- 100 1_
- $a Klemes, Jan $u Contipro a.s., R&D Department, CZ-56102, Dolni Dobrouc, Czech Republic.
- 245 10
- $a Non-invasive diagnostic system and its opto-mechanical probe for combining confocal Raman spectroscopy and optical coherence tomography / $c J. Klemes, A. Kotzianova, M. Pokorny, P. Mojzes, J. Novak, L. Sukova, J. Demuth, J. Vesely, L. Sasek, V. Velebny,
- 520 9_
- $a Non-invasive optical diagnostic methods allow important information about studied systems to be obtained in a non-destructive way. Complete diagnosis requires information about the chemical composition as well as the morphological structure of a sample. We report on the development of an opto-mechanical probe that combines Raman spectroscopy (RS) and optical coherence tomography (OCT), two methods that provide all the crucial information needed for a non-invasive diagnosis. The aim of this paper is to introduce the technical design, construction and optimization of a dual opto-mechanical probe combining two in-house developed devices for confocal RS and OCT. The unique benefit of the probe is a gradual acquisition of OCT and RS data, which allows to use the acquired OCT images to pinpoint locations of interest for RS measurements. The parameters and the correct functioning of the probe were verified by RS scanning of various samples (silicon wafer and ex vivo tissue) based on their OCT images - lateral as well as depth scanning was performed. Both the OCT and RS systems were developed, optimized and tested with the ultimate aim of verifying the functionality of the probe. Picture: Schematic illustration and visualization of the developed RS-OCT probe.
- 650 12
- $a mechanické jevy $7 D055595
- 650 _2
- $a software $7 D012984
- 650 _2
- $a Ramanova spektroskopie $x přístrojové vybavení $x metody $7 D013059
- 650 _2
- $a systémová integrace $7 D018511
- 650 _2
- $a optická koherentní tomografie $x přístrojové vybavení $x metody $7 D041623
- 655 _2
- $a časopisecké články $7 D016428
- 700 1_
- $a Kotzianova, Adela $u Contipro a.s., R&D Department, CZ-56102, Dolni Dobrouc, Czech Republic. Masaryk University, Faculty of Science, Department of Chemistry, CZ-62500, Brno, Czech Republic.
- 700 1_
- $a Pokorny, Marek $u Contipro a.s., R&D Department, CZ-56102, Dolni Dobrouc, Czech Republic.
- 700 1_
- $a Mojzes, Peter $u Charles University, Faculty of Mathematics and Physics, Institute of Physics, CZ-12116, Prague, Czech Republic.
- 700 1_
- $a Novak, Jindrich $u Nanoware, CZ-14800, Praha 4, Czech Republic.
- 700 1_
- $a Sukova, Lada $u Contipro a.s., R&D Department, CZ-56102, Dolni Dobrouc, Czech Republic.
- 700 1_
- $a Demuth, Jaroslav $u Safibra s.r.o., CZ-25101, Ricany, Czech Republic.
- 700 1_
- $a Vesely, Jaroslav $u Safibra s.r.o., CZ-25101, Ricany, Czech Republic.
- 700 1_
- $a Sasek, Ladislav $u Safibra s.r.o., CZ-25101, Ricany, Czech Republic.
- 700 1_
- $a Velebny, Vladimir $u Contipro a.s., R&D Department, CZ-56102, Dolni Dobrouc, Czech Republic.
- 773 0_
- $w MED00157626 $t Journal of biophotonics $x 1864-0648 $g Roč. 10, č. 11 (2017), s. 1442-1449
- 856 41
- $u https://pubmed.ncbi.nlm.nih.gov/28464557 $y Pubmed
- 910 __
- $a ABA008 $b sig $c sign $y a $z 0
- 990 __
- $a 20180709 $b ABA008
- 991 __
- $a 20180716120130 $b ABA008
- 999 __
- $a ok $b bmc $g 1317186 $s 1021976
- BAS __
- $a 3
- BAS __
- $a PreBMC
- BMC __
- $a 2017 $b 10 $c 11 $d 1442-1449 $e 20170502 $i 1864-0648 $m Journal of biophotonics $n J Biophotonics $x MED00157626
- LZP __
- $a Pubmed-20180709