• Something wrong with this record ?

Structure degradation and strength changes of sintered calcium phosphate bone scaffolds with different phase structures during simulated biodegradation in vitro

P. Stastny, R. Sedlacek, T. Suchy, V. Lukasova, M. Rampichova, M. Trunec,

. 2019 ; 100 (-) : 544-553. [pub] 20190309

Language English Country Netherlands

Document type Journal Article

Grant support
NV17-31276A MZ0 CEP Register

The structure degradation and strength changes of calcium phosphate scaffolds after long-term exposure to an acidic environment simulating the osteoclastic activity were determined and compared. Sintered calcium phosphate scaffolds with different phase structures were prepared with a similar cellular pore structure and an open porosity of over 80%. Due to microstructural features the biphasic calcium phosphate (BCP) scaffolds had a higher compressive strength of 1.7 MPa compared with the hydroxyapatite (HA) and β-tricalcium phosphate (TCP) scaffolds, which exhibited a similar strength of 1.2 MPa. After exposure to an acidic buffer solution of pH = 5.5, the strength of the HA scaffolds did not change over 14 days. On the other hand, the strength of the TCP scaffolds decreased steeply in the first 2 days and reached a negligible value of 0.09 MPa after 14 days. The strength of the BCP scaffolds showed a steady decrease with a reasonable value of 0.5 MPa after 14 days. The mass loss, phase composition and microstructural changes of the scaffolds during degradation in the acidic environment were investigated and a mechanism of scaffold degradation was proposed. The BCP scaffold showed the best cell response in the in vitro tests. The BCP scaffold structure with the highly soluble phase (α-TCP) embedded in a less soluble matrix (β-TCP/HA) exhibited a controllable degradation with a suitable strength stability and with beneficial biological behavior it represented the preferred calcium phosphate structure for a resorbable bone scaffold.

References provided by Crossref.org

000      
00000naa a2200000 a 4500
001      
bmc19034660
003      
CZ-PrNML
005      
20191014103632.0
007      
ta
008      
191007s2019 ne f 000 0|eng||
009      
AR
024    7_
$a 10.1016/j.msec.2019.03.027 $2 doi
035    __
$a (PubMed)30948091
040    __
$a ABA008 $b cze $d ABA008 $e AACR2
041    0_
$a eng
044    __
$a ne
100    1_
$a Stastny, Premysl $u CEITEC BUT, Brno University of Technology, Purkynova 123, 612 00 Brno, Czech Republic.
245    10
$a Structure degradation and strength changes of sintered calcium phosphate bone scaffolds with different phase structures during simulated biodegradation in vitro / $c P. Stastny, R. Sedlacek, T. Suchy, V. Lukasova, M. Rampichova, M. Trunec,
520    9_
$a The structure degradation and strength changes of calcium phosphate scaffolds after long-term exposure to an acidic environment simulating the osteoclastic activity were determined and compared. Sintered calcium phosphate scaffolds with different phase structures were prepared with a similar cellular pore structure and an open porosity of over 80%. Due to microstructural features the biphasic calcium phosphate (BCP) scaffolds had a higher compressive strength of 1.7 MPa compared with the hydroxyapatite (HA) and β-tricalcium phosphate (TCP) scaffolds, which exhibited a similar strength of 1.2 MPa. After exposure to an acidic buffer solution of pH = 5.5, the strength of the HA scaffolds did not change over 14 days. On the other hand, the strength of the TCP scaffolds decreased steeply in the first 2 days and reached a negligible value of 0.09 MPa after 14 days. The strength of the BCP scaffolds showed a steady decrease with a reasonable value of 0.5 MPa after 14 days. The mass loss, phase composition and microstructural changes of the scaffolds during degradation in the acidic environment were investigated and a mechanism of scaffold degradation was proposed. The BCP scaffold showed the best cell response in the in vitro tests. The BCP scaffold structure with the highly soluble phase (α-TCP) embedded in a less soluble matrix (β-TCP/HA) exhibited a controllable degradation with a suitable strength stability and with beneficial biological behavior it represented the preferred calcium phosphate structure for a resorbable bone scaffold.
650    _2
$a kosti a kostní tkáň $x fyziologie $7 D001842
650    _2
$a fosforečnany vápenaté $x chemie $7 D002130
650    _2
$a buněčná adheze $7 D002448
650    _2
$a keramika $x chemie $7 D002516
650    _2
$a pevnost v tlaku $7 D019245
650    _2
$a DNA $x metabolismus $7 D004247
650    _2
$a lidé $7 D006801
650    _2
$a koncentrace vodíkových iontů $7 D006863
650    _2
$a mezenchymální kmenové buňky $x cytologie $7 D059630
650    _2
$a poréznost $7 D016062
650    _2
$a tkáňové podpůrné struktury $x chemie $7 D054457
655    _2
$a časopisecké články $7 D016428
700    1_
$a Sedlacek, Radek $u Department of Mechanics, Biomechanics and Mechatronics, Czech Technical University in Prague, Technicka 4, 166 07 Prague, Czech Republic.
700    1_
$a Suchy, Tomas $u Department of Mechanics, Biomechanics and Mechatronics, Czech Technical University in Prague, Technicka 4, 166 07 Prague, Czech Republic; Institute of Rock Structure and Mechanics, Czech Academy of Sciences, V Holesovickach 41, 182 09 Prague, Czech Republic.
700    1_
$a Lukasova, Vera $u Institute of Experimental Medicine, Czech Academy of Sciences, Videnska 1083, 142 20 Prague, Czech Republic; University Center for Energy Efficient Buildings, Czech Technical University in Prague, Trinecka 1024, 273 43 Bustehrad, Czech Republic; Department of Cell Biology, Charles University, Vinicna 5, 128 00 Prague, Czech Republic.
700    1_
$a Rampichova, Michala $u Institute of Experimental Medicine, Czech Academy of Sciences, Videnska 1083, 142 20 Prague, Czech Republic.
700    1_
$a Trunec, Martin $u CEITEC BUT, Brno University of Technology, Purkynova 123, 612 00 Brno, Czech Republic; Institute of Materials Science and Engineering, Brno University of Technology, Technicka 2, 616 69 Brno, Czech Republic. Electronic address: martin.trunec@ceitec.vutbr.cz.
773    0_
$w MED00184559 $t Materials science & engineering. C, Materials for biological applications $x 1873-0191 $g Roč. 100, č. - (2019), s. 544-553
856    41
$u https://pubmed.ncbi.nlm.nih.gov/30948091 $y Pubmed
910    __
$a ABA008 $b sig $c sign $y a $z 0
990    __
$a 20191007 $b ABA008
991    __
$a 20191014104056 $b ABA008
999    __
$a ok $b bmc $g 1451320 $s 1073210
BAS    __
$a 3
BAS    __
$a PreBMC
BMC    __
$a 2019 $b 100 $c - $d 544-553 $e 20190309 $i 1873-0191 $m Materials science & engineering. C, Materials for biological applications $n Mater Sci Eng C Mater Biol Appl $x MED00184559
GRA    __
$a NV17-31276A $p MZ0
LZP    __
$a Pubmed-20191007

Find record

Citation metrics

Loading data ...

Archiving options

Loading data ...