• Je něco špatně v tomto záznamu ?

Cytotoxicity study and influence of SBA-15 surface polarity and pH on adsorption and release properties of anticancer agent pemetrexed

M. Almáši, E. Beňová, V. Zeleňák, B. Madaj, V. Huntošová, J. Brus, M. Urbanová, J. Bednarčík, V. Hornebecq,

. 2020 ; 109 (-) : 110552. [pub] 20191214

Jazyk angličtina Země Nizozemsko

Typ dokumentu časopisecké články

Perzistentní odkaz   https://www.medvik.cz/link/bmc20028328

Mesoporous material SBA-15 was functionalized with different polar and nonpolar groups: 3-aminopropyl, (SBA-15-NH2), 3-isocyanatopropyl (SBA-15-NCO), 3-mercaptopropyl (SBA-15-SH), methyl (SBA-15-CH3) and phenyl (SBA-15-Ph). The resulting surface grafted materials were investigated as matrices for controlled drug delivery. Anticancer agent, pemetrexed (disodium pemetrexed heptahydrate) was selected as a model drug and loaded in the unmodified and functionalized SBA-15 materials. Materials were characterized by elemental analysis, infrared spectroscopy, transmission electron microscopy, nitrogen adsorption/desorption analysis, small angle X-ray scattering, powder X-ray diffraction, solid state NMR spectroscopy and thermogravimetry. It was shown that surface modification has an impact on both encapsulated drug amount and release properties. Release experiments were performed into two media with different pH: simulated body fluid (pH = 7.4) and simulated gastric fluid (pH = 2). In general, the effect of pH was reflected by the lower release of pemetrexed under acidic conditions (pH = 2) compared to slightly alkaline saline environment (pH = 7.4). The release rate of pemetrexed from propylamine-, propylisocyanate- and phenyl-modified SBA-15 was found to be effectively controlled by intermolecular interactions as compared to that from pure SBA-15, SBA-15-SH, and SBA-15-CH3, that evidenced a steady and similar release. The highest release was observed for methyl-functionalized material whose hydrophobic surface accelerates the pemetrexed release. The data obtained from release studies were fitted using various kinetic models to determine the pemetrexed release mechanism and its release rate. The best correlations were found for Korsmeyer-Peppas and Higuchi models. Moreover, the theoretical three-parameter model for drug release kinetic was applied to calculate the strength of drug-support interactions. The in vitro cell study was performed on SKBR3 cancer cells and obtained results demonstrated that the modification of the mesoporous silica material by grafted polar/nonpolar groups may significantly affect the compatibility of this material with cells, drug release from this material and subsequent biological activity of PEM.

Citace poskytuje Crossref.org

000      
00000naa a2200000 a 4500
001      
bmc20028328
003      
CZ-PrNML
005      
20210114153534.0
007      
ta
008      
210105s2020 ne f 000 0|eng||
009      
AR
024    7_
$a 10.1016/j.msec.2019.110552 $2 doi
035    __
$a (PubMed)32228921
040    __
$a ABA008 $b cze $d ABA008 $e AACR2
041    0_
$a eng
044    __
$a ne
100    1_
$a Almáši, Miroslav $u Department of Inorganic Chemistry, Faculty of Science, P. J. Šafárik University, Moyzesova 11, SK-041 01 Košice, Slovak Republic. Electronic address: miroslav.almasi@upjs.sk.
245    10
$a Cytotoxicity study and influence of SBA-15 surface polarity and pH on adsorption and release properties of anticancer agent pemetrexed / $c M. Almáši, E. Beňová, V. Zeleňák, B. Madaj, V. Huntošová, J. Brus, M. Urbanová, J. Bednarčík, V. Hornebecq,
520    9_
$a Mesoporous material SBA-15 was functionalized with different polar and nonpolar groups: 3-aminopropyl, (SBA-15-NH2), 3-isocyanatopropyl (SBA-15-NCO), 3-mercaptopropyl (SBA-15-SH), methyl (SBA-15-CH3) and phenyl (SBA-15-Ph). The resulting surface grafted materials were investigated as matrices for controlled drug delivery. Anticancer agent, pemetrexed (disodium pemetrexed heptahydrate) was selected as a model drug and loaded in the unmodified and functionalized SBA-15 materials. Materials were characterized by elemental analysis, infrared spectroscopy, transmission electron microscopy, nitrogen adsorption/desorption analysis, small angle X-ray scattering, powder X-ray diffraction, solid state NMR spectroscopy and thermogravimetry. It was shown that surface modification has an impact on both encapsulated drug amount and release properties. Release experiments were performed into two media with different pH: simulated body fluid (pH = 7.4) and simulated gastric fluid (pH = 2). In general, the effect of pH was reflected by the lower release of pemetrexed under acidic conditions (pH = 2) compared to slightly alkaline saline environment (pH = 7.4). The release rate of pemetrexed from propylamine-, propylisocyanate- and phenyl-modified SBA-15 was found to be effectively controlled by intermolecular interactions as compared to that from pure SBA-15, SBA-15-SH, and SBA-15-CH3, that evidenced a steady and similar release. The highest release was observed for methyl-functionalized material whose hydrophobic surface accelerates the pemetrexed release. The data obtained from release studies were fitted using various kinetic models to determine the pemetrexed release mechanism and its release rate. The best correlations were found for Korsmeyer-Peppas and Higuchi models. Moreover, the theoretical three-parameter model for drug release kinetic was applied to calculate the strength of drug-support interactions. The in vitro cell study was performed on SKBR3 cancer cells and obtained results demonstrated that the modification of the mesoporous silica material by grafted polar/nonpolar groups may significantly affect the compatibility of this material with cells, drug release from this material and subsequent biological activity of PEM.
650    12
$a protinádorové látky $x chemie $x farmakokinetika $x farmakologie $7 D000970
650    _2
$a nádorové buněčné linie $7 D045744
650    _2
$a léky s prodlouženým účinkem $x chemie $x farmakokinetika $x farmakologie $7 D003692
650    _2
$a lidé $7 D006801
650    _2
$a koncentrace vodíkových iontů $7 D006863
650    _2
$a nádory $x farmakoterapie $x metabolismus $x patologie $7 D009369
650    12
$a pemetrexed $x chemie $x farmakokinetika $x farmakologie $7 D000068437
650    12
$a oxid křemičitý $x chemie $x farmakokinetika $x farmakologie $7 D012822
650    _2
$a povrchové vlastnosti $7 D013499
655    _2
$a časopisecké články $7 D016428
700    1_
$a Beňová, Eva $u Department of Inorganic Chemistry, Faculty of Science, P. J. Šafárik University, Moyzesova 11, SK-041 01 Košice, Slovak Republic; Aix-Marseille University, CNRS, MADIREL, F-133 97 Marseille, France.
700    1_
$a Zeleňák, Vladimír $u Department of Inorganic Chemistry, Faculty of Science, P. J. Šafárik University, Moyzesova 11, SK-041 01 Košice, Slovak Republic.
700    1_
$a Madaj, Branislav $u Department of Inorganic Chemistry, Faculty of Science, P. J. Šafárik University, Moyzesova 11, SK-041 01 Košice, Slovak Republic.
700    1_
$a Huntošová, Veronika $u Center for Interdisciplinary Biosciences, Technology and Innovation Park, P. J. Šafárik University, Jesenna 5, SK-041 54 Košice, Slovak Republic.
700    1_
$a Brus, Jiří $u Laboratory of Solid State NMR Spectroscopy, Department of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovsky square 2, CZ-162 06 Prague, Czech Republic.
700    1_
$a Urbanová, Martina $u Laboratory of Solid State NMR Spectroscopy, Department of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, Heyrovsky square 2, CZ-162 06 Prague, Czech Republic.
700    1_
$a Bednarčík, Jozef $u Department of Physics, Faculty of Science, P. J. Šafárik University, Park Angelinum 9, SK-041 01 Košice, Slovak Republic; Institute of Experimental Physics, Slovak Academy of Sciences, Watsonova 47, SK-040 01 Košice, Slovak Republic.
700    1_
$a Hornebecq, Virginie $u Aix-Marseille University, CNRS, MADIREL, F-133 97 Marseille, France.
773    0_
$w MED00184559 $t Materials science & engineering. C, Materials for biological applications $x 1873-0191 $g Roč. 109, č. - (2020), s. 110552
856    41
$u https://pubmed.ncbi.nlm.nih.gov/32228921 $y Pubmed
910    __
$a ABA008 $b sig $c sign $y a $z 0
990    __
$a 20210105 $b ABA008
991    __
$a 20210114153532 $b ABA008
999    __
$a ok $b bmc $g 1608663 $s 1119508
BAS    __
$a 3
BAS    __
$a PreBMC
BMC    __
$a 2020 $b 109 $c - $d 110552 $e 20191214 $i 1873-0191 $m Materials science & engineering. C, Materials for biological applications $n Mater Sci Eng C Mater Biol Appl $x MED00184559
LZP    __
$a Pubmed-20210105

Najít záznam

Citační ukazatele

Nahrávání dat ...

Možnosti archivace

Nahrávání dat ...