• Je něco špatně v tomto záznamu ?

Lumbar Interbody Fusion Conducted on a Porcine Model with a Bioresorbable Ceramic/Biopolymer Hybrid Implant Enriched with Hyperstable Fibroblast Growth Factor 2

M. Krticka, L. Planka, L. Vojtova, V. Nekuda, P. Stastny, R. Sedlacek, A. Brinek, M. Kavkova, E. Gopfert, V. Hedvicakova, M. Rampichova, L. Kren, K. Liskova, D. Ira, J. Dorazilová, T. Suchy, T. Zikmund, J. Kaiser, D. Stary, M. Faldyna, M. Trunec

. 2021 ; 9 (7) : . [pub] 20210625

Jazyk angličtina Země Švýcarsko

Typ dokumentu časopisecké články

Perzistentní odkaz   https://www.medvik.cz/link/bmc21024500

Grantová podpora
17-31276A Ministerstvo Zdravotnictví Ceské Republiky

Many growth factors have been studied as additives accelerating lumbar fusion rates in different animal models. However, their low hydrolytic and thermal stability both in vitro and in vivo limits their workability and use. In the proposed work, a stabilized vasculogenic and prohealing fibroblast growth factor-2 (FGF2-STAB®) exhibiting a functional half-life in vitro at 37 °C more than 20 days was applied for lumbar fusion in combination with a bioresorbable scaffold on porcine models. An experimental animal study was designed to investigate the intervertebral fusion efficiency and safety of a bioresorbable ceramic/biopolymer hybrid implant enriched with FGF2-STAB® in comparison with a tricortical bone autograft used as a gold standard. Twenty-four experimental pigs underwent L2/3 discectomy with implantation of either the tricortical iliac crest bone autograft or the bioresorbable hybrid implant (BHI) followed by lateral intervertebral fixation. The quality of spinal fusion was assessed by micro-computed tomography (micro-CT), biomechanical testing, and histological examination at both 8 and 16 weeks after the surgery. While 8 weeks after implantation, micro-CT analysis demonstrated similar fusion quality in both groups, in contrast, spines with BHI involving inorganic hydroxyapatite and tricalcium phosphate along with organic collagen, oxidized cellulose, and FGF2- STAB® showed a significant increase in a fusion quality in comparison to the autograft group 16 weeks post-surgery (p = 0.023). Biomechanical testing revealed significantly higher stiffness of spines treated with the bioresorbable hybrid implant group compared to the autograft group (p < 0.05). Whilst histomorphological evaluation showed significant progression of new bone formation in the BHI group besides non-union and fibrocartilage tissue formed in the autograft group. Significant osteoinductive effects of BHI based on bioceramics, collagen, oxidized cellulose, and FGF2-STAB® could improve outcomes in spinal fusion surgery and bone tissue regeneration.

Citace poskytuje Crossref.org

000      
00000naa a2200000 a 4500
001      
bmc21024500
003      
CZ-PrNML
005      
20211013133910.0
007      
ta
008      
211006s2021 sz f 000 0|eng||
009      
AR
024    7_
$a 10.3390/biomedicines9070733 $2 doi
035    __
$a (PubMed)34202232
040    __
$a ABA008 $b cze $d ABA008 $e AACR2
041    0_
$a eng
044    __
$a sz
100    1_
$a Krticka, Milan $u Trauma Surgery Department, Faculty of Medicine, Masaryk University and The University Hospital Brno, 625 00 Brno, Czech Republic
245    10
$a Lumbar Interbody Fusion Conducted on a Porcine Model with a Bioresorbable Ceramic/Biopolymer Hybrid Implant Enriched with Hyperstable Fibroblast Growth Factor 2 / $c M. Krticka, L. Planka, L. Vojtova, V. Nekuda, P. Stastny, R. Sedlacek, A. Brinek, M. Kavkova, E. Gopfert, V. Hedvicakova, M. Rampichova, L. Kren, K. Liskova, D. Ira, J. Dorazilová, T. Suchy, T. Zikmund, J. Kaiser, D. Stary, M. Faldyna, M. Trunec
520    9_
$a Many growth factors have been studied as additives accelerating lumbar fusion rates in different animal models. However, their low hydrolytic and thermal stability both in vitro and in vivo limits their workability and use. In the proposed work, a stabilized vasculogenic and prohealing fibroblast growth factor-2 (FGF2-STAB®) exhibiting a functional half-life in vitro at 37 °C more than 20 days was applied for lumbar fusion in combination with a bioresorbable scaffold on porcine models. An experimental animal study was designed to investigate the intervertebral fusion efficiency and safety of a bioresorbable ceramic/biopolymer hybrid implant enriched with FGF2-STAB® in comparison with a tricortical bone autograft used as a gold standard. Twenty-four experimental pigs underwent L2/3 discectomy with implantation of either the tricortical iliac crest bone autograft or the bioresorbable hybrid implant (BHI) followed by lateral intervertebral fixation. The quality of spinal fusion was assessed by micro-computed tomography (micro-CT), biomechanical testing, and histological examination at both 8 and 16 weeks after the surgery. While 8 weeks after implantation, micro-CT analysis demonstrated similar fusion quality in both groups, in contrast, spines with BHI involving inorganic hydroxyapatite and tricalcium phosphate along with organic collagen, oxidized cellulose, and FGF2- STAB® showed a significant increase in a fusion quality in comparison to the autograft group 16 weeks post-surgery (p = 0.023). Biomechanical testing revealed significantly higher stiffness of spines treated with the bioresorbable hybrid implant group compared to the autograft group (p < 0.05). Whilst histomorphological evaluation showed significant progression of new bone formation in the BHI group besides non-union and fibrocartilage tissue formed in the autograft group. Significant osteoinductive effects of BHI based on bioceramics, collagen, oxidized cellulose, and FGF2-STAB® could improve outcomes in spinal fusion surgery and bone tissue regeneration.
655    _2
$a časopisecké články $7 D016428
700    1_
$a Planka, Ladislav $u Department of Paediatric Surgery, Orthopedics and Traumatology, Faculty of Medicine, Masaryk University and The University Hospital Brno, 662 63 Brno, Czech Republic
700    1_
$a Vojtova, Lucy $u CEITEC-Central European Institute of Technology, Brno University of Technology, 612 00 Brno, Czech Republic
700    1_
$a Nekuda, Vladimir $u Trauma Surgery Department, Faculty of Medicine, Masaryk University and The University Hospital Brno, 625 00 Brno, Czech Republic
700    1_
$a Stastny, Premysl $u CEITEC-Central European Institute of Technology, Brno University of Technology, 612 00 Brno, Czech Republic
700    1_
$a Sedlacek, Radek $u Department of Mechanics, Biomechanics and Mechatronics, Faculty of Mechanical Engineering, Czech Technical University in Prague, 160 00 Prague, Czech Republic
700    1_
$a Brinek, Adam $u CEITEC-Central European Institute of Technology, Brno University of Technology, 612 00 Brno, Czech Republic
700    1_
$a Kavkova, Michaela $u CEITEC-Central European Institute of Technology, Brno University of Technology, 612 00 Brno, Czech Republic
700    1_
$a Gopfert, Eduard $u Veterinary Research Institute, 621 00 Brno, Czech Republic
700    1_
$a Hedvicakova, Vera $u University Center for Energy Efficient Buildings, Czech Technical University in Prague, 273 43 Bustehrad, Czech Republic $u Department of Tissue Engineering, Institute of Experimental Medicine of the Czech Academy of Sciences, Videnska 1083, 142 20 Prague, Czech Republic
700    1_
$a Rampichova, Michala $u University Center for Energy Efficient Buildings, Czech Technical University in Prague, 273 43 Bustehrad, Czech Republic $u Department of Tissue Engineering, Institute of Experimental Medicine of the Czech Academy of Sciences, Videnska 1083, 142 20 Prague, Czech Republic
700    1_
$a Kren, Leos $u Department of Pathology, Faculty of Medicine of Masaryk University and The University Hospital Brno, 625 00 Brno, Czech Republic
700    1_
$a Liskova, Kvetoslava $u Department of Pathology, Faculty of Medicine of Masaryk University and The University Hospital Brno, 625 00 Brno, Czech Republic
700    1_
$a Ira, Daniel $u Trauma Surgery Department, Faculty of Medicine, Masaryk University and The University Hospital Brno, 625 00 Brno, Czech Republic
700    1_
$a Dorazilová, Jana $u CEITEC-Central European Institute of Technology, Brno University of Technology, 612 00 Brno, Czech Republic
700    1_
$a Suchy, Tomas $u Department of Composites and Carbon Materials, Institute of Rock Structure and Mechanics, The Czech Academy of Sciences, 182 09 Prague, Czech Republic
700    1_
$a Zikmund, Tomas $u CEITEC-Central European Institute of Technology, Brno University of Technology, 612 00 Brno, Czech Republic
700    1_
$a Kaiser, Jozef $u CEITEC-Central European Institute of Technology, Brno University of Technology, 612 00 Brno, Czech Republic
700    1_
$a Stary, David $u Department of Paediatric Surgery, Orthopedics and Traumatology, Faculty of Medicine, Masaryk University and The University Hospital Brno, 662 63 Brno, Czech Republic
700    1_
$a Faldyna, Martin $u Veterinary Research Institute, 621 00 Brno, Czech Republic
700    1_
$a Trunec, Martin $u CEITEC-Central European Institute of Technology, Brno University of Technology, 612 00 Brno, Czech Republic
773    0_
$w MED00205373 $t Biomedicines $x 2227-9059 $g Roč. 9, č. 7 (2021)
856    41
$u https://pubmed.ncbi.nlm.nih.gov/34202232 $y Pubmed
910    __
$a ABA008 $b sig $c sign $y - $z 0
990    __
$a 20211006 $b ABA008
991    __
$a 20211013133907 $b ABA008
999    __
$a ind $b bmc $g 1708349 $s 1144997
BAS    __
$a 3
BAS    __
$a PreBMC
BMC    __
$a 2021 $b 9 $c 7 $e 20210625 $i 2227-9059 $m Biomedicines $n Biomedicines $x MED00205373
GRA    __
$a 17-31276A $p Ministerstvo Zdravotnictví Ceské Republiky
LZP    __
$a Pubmed-20211006

Najít záznam

Citační ukazatele

Možnosti archivace