• Je něco špatně v tomto záznamu ?

Three-dimensional printed model reconstruction in intraoperative use for glass penetrating facial tissue removal

F. Basovsky, L. Capek, I. Kucera, F. Ptacek, J. Kriz

. 2024 ; 12 (9) : e9271. [pub] 20240828

Status neindexováno Jazyk angličtina Země Anglie, Velká Británie

Typ dokumentu kazuistiky, časopisecké články

Perzistentní odkaz   https://www.medvik.cz/link/bmc24017917

KEY CLINICAL MESSAGE: In the anatomically complex terrain of the head and neck, the use of 3D intraoperative models serves as an effective verification tool, determining the size, shape, and number of foreign bodies. This allows the main operator to maximize their capacities for careful wound revision and receive real-time information about the remaining content of the sought-after bodies. ABSTRACT: Penetrating foreign bodies of various origins in the head and neck are uncommon, but potentially hazardous injuries. Complete removal of foreign bodies from soft tissues is essential for optimal healing, minimizing complications, and significantly reducing the risk of the need for reoperation. Despite various technological systems and safeguards available, unintentionally retained surgically placed foreign bodies remain difficult to eliminate completely. A 34-year-old female patient with a cut on the right side of her face who was initially treated with sutures at a general surgical clinic presented for a follow-up examination. A foreign body was verified subcutaneously on the anterior-posterior x-ray image on the right side. Computed tomography confirmed a total of 7 foreign bodies with a density corresponding to dental enamel, distributed subcutaneously, subfascially, and intramuscularly in the right temporal region. As part of the preoperative preparation and analysis, the bone segment of the right temporal fossa with the zygomatic bone and the glass fragments were segmented from the CT data and printed on an SLA printer. The physical 3D models were autoclave sterilized and present during surgery. The position, shape, and number of each individual glass fragment was compared with 3D-printed one. The benefits of producing 3D models of foreign bodies are undeniable, particularly in their perioperative comparison with the removed foreign bodies from wounds.

Citace poskytuje Crossref.org

000      
00000naa a2200000 a 4500
001      
bmc24017917
003      
CZ-PrNML
005      
20241016081815.0
007      
ta
008      
241008s2024 enk f 000 0|eng||
009      
AR
024    7_
$a 10.1002/ccr3.9271 $2 doi
035    __
$a (PubMed)39210933
040    __
$a ABA008 $b cze $d ABA008 $e AACR2
041    0_
$a eng
044    __
$a enk
100    1_
$a Basovsky, Filip $u Department of Maxillo-Facial surgery Regional Hospital Liberec Liberec Czechia
245    10
$a Three-dimensional printed model reconstruction in intraoperative use for glass penetrating facial tissue removal / $c F. Basovsky, L. Capek, I. Kucera, F. Ptacek, J. Kriz
520    9_
$a KEY CLINICAL MESSAGE: In the anatomically complex terrain of the head and neck, the use of 3D intraoperative models serves as an effective verification tool, determining the size, shape, and number of foreign bodies. This allows the main operator to maximize their capacities for careful wound revision and receive real-time information about the remaining content of the sought-after bodies. ABSTRACT: Penetrating foreign bodies of various origins in the head and neck are uncommon, but potentially hazardous injuries. Complete removal of foreign bodies from soft tissues is essential for optimal healing, minimizing complications, and significantly reducing the risk of the need for reoperation. Despite various technological systems and safeguards available, unintentionally retained surgically placed foreign bodies remain difficult to eliminate completely. A 34-year-old female patient with a cut on the right side of her face who was initially treated with sutures at a general surgical clinic presented for a follow-up examination. A foreign body was verified subcutaneously on the anterior-posterior x-ray image on the right side. Computed tomography confirmed a total of 7 foreign bodies with a density corresponding to dental enamel, distributed subcutaneously, subfascially, and intramuscularly in the right temporal region. As part of the preoperative preparation and analysis, the bone segment of the right temporal fossa with the zygomatic bone and the glass fragments were segmented from the CT data and printed on an SLA printer. The physical 3D models were autoclave sterilized and present during surgery. The position, shape, and number of each individual glass fragment was compared with 3D-printed one. The benefits of producing 3D models of foreign bodies are undeniable, particularly in their perioperative comparison with the removed foreign bodies from wounds.
590    __
$a NEINDEXOVÁNO
655    _2
$a kazuistiky $7 D002363
655    _2
$a časopisecké články $7 D016428
700    1_
$a Capek, Lukas $u Department of Clinical Biomechanics Regional Hospital Liberec Liberec Czechia $1 https://orcid.org/0000000339500646 $7 mzk2007390351
700    1_
$a Kucera, Ivo $u Department of Maxillo-Facial surgery Regional Hospital Liberec Liberec Czechia
700    1_
$a Ptacek, Frantisek $u Department of Maxillo-Facial surgery Regional Hospital Liberec Liberec Czechia
700    1_
$a Kriz, Jakub $u Department of Maxillo-Facial surgery Regional Hospital Liberec Liberec Czechia
773    0_
$w MED00194285 $t Clinical case reports $x 2050-0904 $g Roč. 12, č. 9 (2024), s. e9271
856    41
$u https://pubmed.ncbi.nlm.nih.gov/39210933 $y Pubmed
910    __
$a ABA008 $b sig $c sign $y - $z 0
990    __
$a 20241008 $b ABA008
991    __
$a 20241016081810 $b ABA008
999    __
$a ok $b bmc $g 2196405 $s 1229868
BAS    __
$a 3
BAS    __
$a PreBMC-PubMed-not-MEDLINE
BMC    __
$a 2024 $b 12 $c 9 $d e9271 $e 20240828 $i 2050-0904 $m Clinical case reports $n Clin Case Rep $x MED00194285
LZP    __
$a Pubmed-20241008

Najít záznam

Citační ukazatele

    Možnosti archivace