The impact of different operating conditions on membrane fouling and EPS production
Jazyk angličtina Země Anglie, Velká Británie Médium print-electronic
Typ dokumentu časopisecké články, práce podpořená grantem
PubMed
21565496
DOI
10.1016/j.biortech.2011.04.061
PII: S0960-8524(11)00575-X
Knihovny.cz E-zdroje
- MeSH
- biopolymery biosyntéza MeSH
- bioznečištění * MeSH
- extracelulární prostor chemie MeSH
- kinetika MeSH
- kvartérní amoniové sloučeniny analýza MeSH
- membrány umělé * MeSH
- měření biologické spotřeby kyslíku MeSH
- odpad tekutý - odstraňování metody MeSH
- pilotní projekty MeSH
- rozpustnost MeSH
- tlak MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
- Názvy látek
- biopolymery MeSH
- kvartérní amoniové sloučeniny MeSH
- membrány umělé * MeSH
The main goal of this research was to investigate how different factors influence membrane fouling. The impact of the different concentrations of activated sludge and the amount of extracellular polymer substances (EPS) were monitored. Two pilot plants with submerged membrane modules (hollow fiber and flat sheet) were operated and the raw wastewater was used. Humic substances were identified as the major components of EPS in the activated sludge (more than 34%) in both pilot plants. As the basic constituent in permeate, humic substances were identified as the most dominant components in the effluent (61%) in both pilot plants. Conversely, proteins were mostly analyzed in permeate and supernatant below the detection limit. The total amount of EPS [mgg(-1) (VSS)] was similar for concentrations of activated sludge 6, 10 and 14 g L(-1). Carbohydrates were identified as the component of EPS which tends most to clog membranes.
Citace poskytuje Crossref.org