Bell-shaped extraction device assisted liquid-liquid microextraction technique and its optimization using response-surface methodology
Jazyk angličtina Země Nizozemsko Médium print-electronic
Typ dokumentu hodnotící studie, časopisecké články, práce podpořená grantem
PubMed
22349143
DOI
10.1016/j.chroma.2012.01.069
PII: S0021-9673(12)00195-1
Knihovny.cz E-zdroje
- MeSH
- chemické látky znečišťující vodu analýza izolace a purifikace MeSH
- design vybavení MeSH
- mikroextrakce kapalné fáze přístrojové vybavení metody MeSH
- minerální vody analýza MeSH
- pitná voda analýza MeSH
- plynová chromatografie s hmotnostně spektrometrickou detekcí metody MeSH
- reprodukovatelnost výsledků MeSH
- voda analýza MeSH
- Publikační typ
- časopisecké články MeSH
- hodnotící studie MeSH
- práce podpořená grantem MeSH
- Názvy látek
- chemické látky znečišťující vodu MeSH
- minerální vody MeSH
- pitná voda MeSH
- voda MeSH
We have developed a new microextraction technique for equilibrium, non-exhaustive analyte preconcentration from aqueous solutions into organic solvents lighter than water. The key point of the method is application of specially designed and optimized bell-shaped extraction device, BSED. The technique has been tested and applied to the preconcentration of selected volatile and semi volatile compounds which were determined by gas chromatography/mass spectrometry in spiked water samples. The significant parameters of the extraction have been found using chemometric procedures and these parameters were optimized using the central composite design (CCD) for two solvents. The analyte preconcentration factors were in a range from 8.3 to 161.8 (repeatability from 7 to 14%) for heptane, and 50.0-105.0 (repeatability from 0 to 5%) for tert-butyl acetate. The reproducibility of the technique was within 1-8%. The values of limits of detection and determination were 0.1-3.3 ng mL(-1) for heptane and 0.3-10.7 ng mL(-1) for tert-butyl acetate. The new microextraction technique has been found to be a cheap, simple and flexible alternative to the common procedures, such as SPME or LLME. This BSED-LLME technique can also be combined with other separation methods, e.g., HPLC or CE.
Citace poskytuje Crossref.org