The functional properties of composites modified by superabsorbent polymers (SAPs) strongly depend on the swelling capacity of applied SAPs. In this sense, three types of commercially available SAPs namely Cablock CT, Hydropam, and Creasorb SIS with different chemical composition and particle size distribution were studied in this manuscript to reveal the differences in absorptivity as can be viewed as pretests for their utilization in concrete composites. In addition, absorptivity in distilled water, tap water, and 0.1 M NaCl solution are examined for determining the SAPs response for the change of the solution pH. To overcome problems with the teabag method inaccuracy, the new method is introduced. Besides to quantitative evaluation of the SAPs absorptivity, the correlation for the absorption and desorption period as the function of SAPs residence time within the examined solution is proposed. To access the effect of selected SAPs on functional properties, optimization based on the flow table test is employed and mechanical parameters are determined after 7, 14, 28, and 90 days of curing. Obtained results refer to substantial differences between particular SAPs and contribute to the understanding of the effect of SAP on the functional properties of cement-based materials.

Faculty of Chemical Engineering and Technology Cracow University of Technology Warszawska 24 31155 Cracow Poland

Faculty of Civil Engineering Czech Technical University Prague Thákurova 7 16629 Prague Czech Republic

See more in PubMed

Bowman D.C., Evans R.Y., Paul J.L. Fertilizer Salts Reduce Hydration of Polyacrylamide Gels and Affect Physical-Properties of Gel-Amended Container Media. J. Am. Soc. Hortic. Sci. 1990;115:382–386. doi: 10.21273/JASHS.115.3.382. DOI

Kosemund K., Schlatter H., Ochsenhirt J.L., Krause E.L., Marsman D.S., Erasala G.N. Safety evaluation of superabsorbent baby diapers. Regul. Toxicol. Pharmacol. 2009;53:81–89. doi: 10.1016/j.yrtph.2008.10.005. PubMed DOI

Calo E., Khutoryanskiy V.V. Biomedical applications of hydrogels: A review of patents and commercial products. Eur. Polym. J. 2015;65:252–267. doi: 10.1016/j.eurpolymj.2014.11.024. DOI

Kim D.W., Kim K.S., Seo Y.G., Lee B.J., Park Y.J., Youn Y.S., Kim J.O., Yong C.S., Jin S.G., Choi H.G. Novel sodium fusidate-loaded film-forming hydrogel with easy application and excellent wound healing. Int. J. Pharm. 2015;495:67–74. doi: 10.1016/j.ijpharm.2015.08.082. PubMed DOI

Silva D., Fernandes A.C., Nunes T.G., Colaco R., Serro A.P. The effect of albumin and cholesterol on the biotribological behavior of hydrogels for contact lenses. Acta Biomater. 2015;26:184–194. doi: 10.1016/j.actbio.2015.08.011. PubMed DOI

Demitri C., Scalera F., Madaghiele M., Sannino A., Maffezzoli A. Potential of Cellulose-Based Superabsorbent Hydrogels as Water Reservoir in Agriculture. Int. J. Polym. Sci. 2013;2013:435073. doi: 10.1155/2013/435073. DOI

Guilherme M.R., Aouada F.A., Fajardo A.R., Martins A.F., Paulino A.T., Davi M.F.T., Rubira A.F., Muniz E.C. Superabsorbent hydrogels based on polysaccharides for application in agriculture as soil conditioner and nutrient carrier: A review. Eur. Polym. J. 2015;72:365–385. doi: 10.1016/j.eurpolymj.2015.04.017. DOI

Zohuriaan-Mehr M.J., Kabiri K. Superabsorbent polymer materials: A review. Iran. Polym. J. 2008;17:451–477.

Hong G., Song C., Choi S. Autogenous Healing of Early-Age Cracks in Cementitious Materials by Superabsorbent Polymers. Materials. 2020;13:590. doi: 10.3390/ma13030690. PubMed DOI PMC

Vafaei B., Farzanian K., Ghahremaninezhad A. The influence of superabsorbent polymer on the properties of alkali-activated slag pastes. Constr. Build. Mater. 2020;236:117525. doi: 10.1016/j.conbuildmat.2019.117525. DOI

Wyrzykowski M., Assmann A., Hesse C., Lura P. Microstructure development and autogenous shrinkage of mortars with C-S-H seeding and internal curing. Cem. Concr. Res. 2020;129:105967. doi: 10.1016/j.cemconres.2019.105967. DOI

Zhong P.H., Wyrzykowski M., Toropovs N., Li L., Liu J.P., Lura P. Internal curing with superabsorbent polymers of different chemical structures. Cem. Concr. Res. 2019;123:105789. doi: 10.1016/j.cemconres.2019.105789. DOI

Van Tittelboom K., De Belie N. Self-Healing in Cementitious Materials—A Review. Materials. 2013;6:2182–2217. doi: 10.3390/ma6062182. PubMed DOI PMC

Snoeck D., Steuperaert S., Van Tittelboom K., Dubruel P., De Belie N. Visualization of water penetration in cementitious materials with superabsorbent polymers by means of neutron radiography. Cem. Concr. Res. 2012;42:1113–1121. doi: 10.1016/j.cemconres.2012.05.005. DOI

Kang S.H., Hong S.G., Moon J. The effect of superabsorbent polymer on various scale of pore structure in ultra-high performance concrete. Constr. Build. Mater. 2018;172:29–40. doi: 10.1016/j.conbuildmat.2018.03.193. DOI

Ma X.W., Liu J.H., Wu Z.M., Shi C.J. Effects of SAP on the properties and pore structure of high performance cement-based materials. Constr. Build. Mater. 2017;131:476–484. doi: 10.1016/j.conbuildmat.2016.11.090. DOI

Gupta S., Kua H.W., Pang S.D. Combination of polypropylene fibre and superabsorbent polymer to improve physical properties of cement mortar. Mag. Concr. Res. 2018;70:350–364. doi: 10.1680/jmacr.17.00193. DOI

He Z.M., Shen A.Q., Guo Y.C., Lyu Z.H., Li D.S., Qin X., Zhao M., Wang Z.L. Cement-based materials modified with superabsorbent polymers: A review. Constr. Build. Mater. 2019;225:569–590. doi: 10.1016/j.conbuildmat.2019.07.139. DOI

Tan Y.W., Chen H.X., Wang Z.D., Xue C., He R. Performances of Cement Mortar Incorporating Superabsorbent Polymer (SAP) Using Different Dosing Methods. Materials. 2019;12:1619. doi: 10.3390/ma12101619. PubMed DOI PMC

Woyciechowski P.P., Kalinowski M. The Influence of Dosing Method and Material Characteristics of Superabsorbent Polymers (SAP) on the Effectiveness of the Concrete Internal Curing. Materials. 2018;11:1600. doi: 10.3390/ma11091600. PubMed DOI PMC

Yang J.B., Sun Z.P., Zhao Y.H., Ji Y.L., Li B.Y. The Water Absorption-release of Superabsorbent Polymers in Fresh Cement Paste: An NMR Study. J. Adv. Concr. Technol. 2020;18:139–145. doi: 10.3151/jact.18.139. DOI

Mechtcherine V., Snoeck D., Schroefl C., De Belie N., Klemm A.J., Ichimiya K., Moon J., Wyrzykowski M., Lura P., Toropovs N., et al. Testing superabsorbent polymer (SAP) sorption properties prior to implementation in concrete: Results of a RILEM Round-Robin Test. Mater. Struct. 2018;51:28. doi: 10.1617/s11527-018-1149-4. DOI

Schrofl C., Mechtcherine V., Gorges M. Relation between the molecular structure and the efficiency of superabsorbent polymers (SAP) as concrete admixture to mitigate autogenous shrinkage. Cem. Concr. Res. 2012;42:865–873. doi: 10.1016/j.cemconres.2012.03.011. DOI

Jensen O.M., Hansen P.F. Water-entrained cement-based materials II. Experimental observations. Cem. Concr. Res. 2002;32:973–978. doi: 10.1016/S0008-8846(02)00737-8. DOI

Jensen O.M., Hansen P.F. Water-entrained cement-based materials I. Principles and theoretical background. Cem. Concr. Res. 2001;31:647–654. doi: 10.1016/S0008-8846(01)00463-X. DOI

Hasholt M.T., Jensen O.M., Kovler K., Zhutovsky S. Can superabsorent polymers mitigate autogenous shrinkage of internally cured concrete without compromising the strength? Constr. Build. Mater. 2012;31:226–230. doi: 10.1016/j.conbuildmat.2011.12.062. DOI

Mignon A., Vermeulen J., Snoeck D., Dubruel P., Van Vlierberghe S., De Belie N. Mechanical and self-healing properties of cementitious materials with pH-responsive semi-synthetic superabsorbent polymers. Mater. Struct. 2017;50:238. doi: 10.1617/s11527-017-1109-4. DOI

Secrieru E., Mechtcherine V., Schrofl C., Bonin D. Rheological characterisation and prediction of pumpability of strain hardening cement-based-composites (SHCC) with and without addition of superabsorbent polymers (SAP) at various temperatures. Constr. Build. Mater. 2016;112:581–594. doi: 10.1016/j.conbuildmat.2016.02.161. DOI

Kobeticova K., Fort J., Cerny R. Interactions of superabsorbent polymers based on acrylamide substances with microorganisms occurring in human dwellings. Ecotoxicol. Environ. Saf. 2020;195:110522. doi: 10.1016/j.ecoenv.2020.110522. PubMed DOI

Zhao S.Y., Jensen O.M., Hasholt M.T. Measuring absorption of superabsorbent polymers in cementitious environments. Mater. Struct. 2020;53:11. doi: 10.1617/s11527-020-1442-x. DOI

Kim M., Kang S.H., Hong S.G., Moon J. Influence of Effective Water-to-Cement Ratios on Internal Damage and Salt Scaling of Concrete with Superabsorbent Polymer. Materials. 2019;12:3863. doi: 10.3390/ma12233863. PubMed DOI PMC

Snoeck D., Schrofl C., Mechtcherine V. Recommendation of RILEM TC 260-RSC: Testing sorption by superabsorbent polymers (SAP) prior to implementation in cement-based materials. Mater. Struct. 2018;51:116. doi: 10.1617/s11527-018-1242-8. DOI

Kang S.H., Hong S.G., Moon J. Absorption kinetics of superabsorbent polymers (SAP) in various cement-based solutions. Cem. Concr. Res. 2017;97:73–83. doi: 10.1016/j.cemconres.2017.03.009. DOI

Snoeck D., Velasco L.F., Mignon A., Van Vlierberghe S., Dubruel P., Lodewyckx P., De Belie N. The effects of superabsorbent polymers on the microstructure of cementitious materials studied by means of sorption experiments. Cem. Concr. Res. 2015;77:26–35. doi: 10.1016/j.cemconres.2015.06.013. DOI

CSN EN 12350-5 . Testing of the Rheology of Fresh Concrete Mixture Part 5: Flow Table Test. Czech Standardization Institute; Prague, Czech Republic: 2007.

EN 1015-11 . Methods of Test for Mortar for Masonry—Part 11: Determination of Flexural and Compressive Strentgth of Hardened Mortar. Czech Standardization Institute; Prague, Czech Republic: 2000.

Yun K.K., Kim K.K., Choi W., Yeon J.H. Hygral Behavior of Superabsorbent Polymers with Various Particle Sizes and Cross-Linking Densities. Polymers. 2017;9:600. doi: 10.3390/polym9110600. PubMed DOI PMC

Mignon A., Graulus G.J., Snoeck D., Martins J., De Belie N., Dubruel P., Van Vlierberghe S. pH-sensitive superabsorbent polymers: A potential candidate material for self-healing concrete. J. Mater. Sci. 2015;50:970–979. doi: 10.1007/s10853-014-8657-6. DOI

Kurenkov V.F., Hartan H.G., Lobanov F.I. Alkaline hydrolysis of polyacrylamide. Russ. J. Appl. Chem. 2001;74:543–554. doi: 10.1023/A:1012786826774. DOI

Mignon A., Snoeck D., Schaubroeck D., Luickx N., Dubruel P., Van Vlierberghe S., De Belie N. pH-responsive superabsorbent polymers: A pathway to self-healing of mortar. React. Funct. Polym. 2015;93:68–76. doi: 10.1016/j.reactfunctpolym.2015.06.003. DOI

Lyu Z.H., Shen A.Q., Mo S.X., Chen Z.H., He Z.M., Li D.S., Qin X. Life-cycle crack resistance and micro characteristics of internally cured concrete with superabsorbent polymers. Constr. Build. Mater. 2020;259:17. doi: 10.1016/j.conbuildmat.2020.119794. DOI

Liu J.H., Khayat K.H., Shi C.J. Effect of superabsorbent polymer characteristics on rheology of ultra-high performance concrete. Cem. Concr. Compos. 2020;112:103636. doi: 10.1016/j.cemconcomp.2020.103636. DOI

Kalinowski M., Woyciechowski P., Sokolowska J. Effect of mechanically-induced fragmentation of polyacrylic superabsorbent polymer (SAP) hydrogel on the properties of cement composites. Constr. Build. Mater. 2020;263:10. doi: 10.1016/j.conbuildmat.2020.120135. DOI

De Meyst L., Mannekens E., Araujo M., Snoeck D., Van Tittelboom K., Van Vlierberghe S., De Belie N. Parameter Study of Superabsorbent Polymers (SAPs) for Use in Durable Concrete Structures. Materials. 2019;12:1541. doi: 10.3390/ma12091541. PubMed DOI PMC

Sun B.B., Wu H., Song W.M., Li Z., Yu J. Design methodology and mechanical properties of Superabsorbent Polymer (SAP) cement-based materials. Constr. Build. Mater. 2019;204:440–449. doi: 10.1016/j.conbuildmat.2019.01.206. DOI

Dang J.T., Zhao J., Du Z.H. Effect of Superabsorbent Polymer on the Properties of Concrete. Polymers. 2017;9:672. doi: 10.3390/polym9120672. PubMed DOI PMC

Ma X.W., Yuan Q., Liu J.H., Shi C.J. Effect of water absorption of SAP on the rheological properties of cement-based materials with ultra-low w/b ratio. Constr. Build. Mater. 2019;195:66–74. doi: 10.1016/j.conbuildmat.2018.11.050. DOI

AzariJafari H., Kazemian A., Rahimi M., Yahia A. Effects of pre-soaked super absorbent polymers on fresh and hardened properties of self-consolidating lightweight concrete. Constr. Build. Mater. 2016;113:215–220. doi: 10.1016/j.conbuildmat.2016.03.010. DOI

Justs J., Wyrzykowski M., Bajare D., Lura P. Internal curing by superabsorbent polymers in ultra-high performance concrete. Cem. Concr. Res. 2015;76:82–90. doi: 10.1016/j.cemconres.2015.05.005. DOI

Beushausen H., Gillmer M., Alexander M. The influence of superabsorbent polymers on strength and durability properties of blended cement mortars. Cem. Concr. Compos. 2014;52:73–80. doi: 10.1016/j.cemconcomp.2014.03.008. DOI

Lin R.F., Pang L.F. Influences of superabsorbent polymers on the strength and shrinkage properties of low water-to-binder ratio expansive concrete. J. Ceram. Process. Res. 2019;20:231–240.

Microstructure Formation of Cement Mortars Modified by Superabsorbent Polymers

Functional Properties of SAP-Based Humidity Control Plasters