Fabrication of adsorbents with excellent adsorption capacity, outstanding stability, easy separation ability, excellent recyclability and widely generality for organic dyes removal from wastewater remains challenging. Herein, three-dimensional polyaniline/poly(vinyl alcohol)/montmorillonite (PANI/PVAL/MMT) hybrid aerogels with easy separation performance and highly effective reusable adsorption on both anionic and cationic dyes were fabricated by a simple in-situ polymerization method. As-prepared hybrid aerogels were characterized via infrared and Raman spectra, scanning electron microscopy, energy dispersive spectra mapping, small and wide-angle X-ray scattering, thermogravimetric analysis, mercury intrusion porosimetry and elemental analysis. The results showed that MMT particles were successfully incorporated into aerogel matrix. Well-defined hierarchical structure, where PANI nanofibers are coated on the skeleton wall, can be observed for PANI/PVAL/MMT when the incorporation amount of MMT was around 11.1 wt%. The adsorption performance of as-prepared hybrid aerogels on both anionic and cationic dyes was systemically carried out at different solution pH, adsorbent dosage and initial dye concentration. The data analysis showed that the adsorption process for PVAL/PANI/MMT aerogel for Reactive Black 5, methyl orange and safranin followed Freundlich isotherm and the maximum experimental adsorption capacities were found to be 199, 251 and 57.0 mg g-1 at 25 °C, respectively. Mechanism studies indicated that the electrostatic interaction is the main driving force for the adsorption of dyes. The results demonstrated that the fabricated hybrid aerogel is an efficient adsorbent for the removal of both anionic and cationic organic dyes.

Institute of High Energy Physics Chinese Academy of Sciences 100049 Beijing China; Spallation Neutron Source Science Centre 523803 Dongguan China

Institute of Macromolecular Chemistry Czech Academy of Sciences 162 06 Prague 6 Czech Republic

Institute of Macromolecular Chemistry Czech Academy of Sciences 162 06 Prague 6 Czech Republic; University of Chemistry and Technology Prague 166 28 Prague 6 Czech Republic

State Key Laboratory for Modification of Chemical Fibers and Polymer Materials and College of Materials Science and Engineering Donghua University Shanghai 201620 China

State Key Laboratory for Modification of Chemical Fibers and Polymer Materials and College of Materials Science and Engineering Donghua University Shanghai 201620 China; Institute of Macromolecular Chemistry Czech Academy of Sciences 162 06 Prague 6 Czech Republic

Citace poskytuje Crossref.org

Carbonized Leather Waste with Deposited Polypyrrole Nanotubes: Conductivity and Dye Adsorption

Recent Advances in the Removal of Organic Dyes from Aqueous Media with Conducting Polymers, Polyaniline and Polypyrrole, and Their Composites