Synergetic effect of TiC particles on cavitation erosion resistance of AZ31-TiC surface composites
Status PubMed-not-MEDLINE Language English Country Great Britain, England Media electronic-ecollection
Document type Journal Article
PubMed
40034291
PubMed Central
PMC11874552
DOI
10.1016/j.heliyon.2025.e42602
PII: S2405-8440(25)00982-X
Knihovny.cz E-resources
- Publication type
- Journal Article MeSH
AZ31/TiC surface composites were produced using Friction Stir Processing (FSP), with varying amounts of TiC particles. The microstructure and hardness measurements, as well as the evaluation of erosion wear resistance, were carried out on AZ31/TiC composites. X-ray diffraction tests were carried out to identify the phase composition. The presence of α-Mg and TiC phases was observed in all composites and no chemical interactions between the AZ31 matrix and TiC were observed at the interface. The AZ31 alloy is shown to have a hardness of 62 The AZ31 alloy reinforced with 15 vol% of TiC particles showed the highest resistance to cavitation with volume loss of 44 mm3, while the AZ31 alloy showed the lowest resistance with volume loss of 142 mm3 for 15 min exposure time. HV ± 2 HV, whereas the AZ31/15 vol% of TiC composites is found to exhibit the highest hardness of 116 HV ± 5 HV.
See more in PubMed
Gupta M. An insight into the capability of composite technology to enable magnesium to spread its wings in engineering and biomedical applications. SOJ Materials Science & Engineering. 2017;5:1–2. doi: 10.15226/sojmse.2017.00145. DOI
Satish Kumar T., Thankachan Titus, Bhowmik Abhijit, Makki Emad, Giri Jayant, Shirsendu Das. Development and characterization of AZ91/AlN magnesium matrix composites via friction stir processing. AIP Advances, AIP Advances. 2024;14 doi: 10.1063/5.0202057. DOI
Satish Kumar T., Raghu R., Thankachan Titus, Kalita Kanak, Čep Robert. Mechanical property analysis and dry sand three-body abrasive wear behaviour of AZ31/ZrO2 composites produced by stir casting. Sci. Rep. 2024;14:1543. doi: 10.1038/s41598-024-52100-9. PubMed DOI PMC
Kamal Basha K., Subramanian R., Satish Kumar T., Suganya Priyadharshini G. Dry sliding wear behaviour of AZ31/ZrO2 composites produced using a stir casting process. MTAEC9. 2023;57(3):257. doi: 10.17222/mit.2022.543. DOI
Vaira Vignesh R., Padmanaban R., Govindaraju M. Synthesis and characterization of magnesium alloy surface composite (AZ91D—SiO2) by friction stir processing for bioimplants. Silicon. 2020;12(5):1085–1102. doi: 10.1007/s12633-019-00194-6. DOI
Vignesh R.V., Padmanaban R., Govindaraju M. Investigations on the surface topography, corrosion behavior, and biocompatibility of friction stir processed magnesium alloy AZ91D. Surface Topography: Metrology and Properties. 2019;7(2) doi: 10.1088/2051-672X/ab269c. DOI
Muralimanokar M., Vaira V.R., Padmanaban R., Suganya P.G. Characterization of AZ31-NbC surface composite fabricated by friction stir processing. Koroze a Ochr Mater. 2020;64:29–37. doi: 10.2478/kom-2020-0005. DOI
Luo A.A. Magnesium casting technology for structural applications. J. Magnesium Alloys. 2013;1:2–22. doi: 10.1016/j.jma.2013.02.002. DOI
Tekumalla S., Nandigam Y., Bibhanshu N., Rajashekara S., Yang C., Suwas S., Gupta M. A strong and deformable in-situ magnesium nanocomposite igniting above 1000 ◦ c. Sci. Rep. 2018;8:7038. doi: 10.1038/s41598-018-25527-0. PubMed DOI PMC
Bagheri B., Abbasi M., Abdollahzadeh A., et al. A comparative study between friction stirs processing and friction stir vibration processing to develop magnesium surface nanocomposites. Int. J. Miner. Metall. Mater. 2020;27:1133–1146. doi: 10.1007/s12613-020-1993-4. DOI
Liang Junhao, Li Hejun, Qi Lehua, Tian Wenlong, Li Xuefeng, Chao Xujiang, Wei Jianfeng. Fabrication and mechanical properties of CNTs/Mg composites prepared by combining friction stir processing and ultrasonic assisted extrusion. J. Alloys Compd. 2017;728(25):282–288. doi: 10.1016/j.jallcom.2017.09.009. DOI
Jonda E., Szala M., Sroka M., Łatk L., Walczak M. Investigations of cavitation erosion and wear resistance of cermet coatings manufactured by HVOF spraying. Appl. Surf. Sci. 2023;608 doi: 10.1016/j.apsusc.2022.155071. DOI
Tekumalla S., Gupta M. In: Magnesium - the Wonder Element for Engineering/Biomedical Applications. Gupta M., editor. Intech Open; 2020. Introductory chapter: an insight into fascinating potential of magnesium. DOI
Kim K., Chahine G.L., Franc J.-P., Karimi A. first ed. Springer International Publishing; Dordrecht: 2014. Advanced Experimental and Numerical Techniques for Cavitation Erosion Prediction. DOI
Taillon G., Pougoum F., Lavigne S., Ton-That L., Schulz R., Bousser E., Savoie S., Martinu L., Klemberg-Sapieha J.E. Cavitation erosion mechanisms in stainless steels and in composite metal–ceramic HVOF coatings. Wear. 2016;364–365:201–210. doi: 10.1016/j.wear.2016.07.015. DOI
Singla Shivali, Kang Amardeep Singh, Sidhu T.S. Development and characterization of WE43/nano-TiC surface composite by friction stir processing technique. Measurement and Control. 2020;53(3–4):730–741. doi: 10.1177/0020294019895302. DOI
Sagar Prem, Handa Amit. Enhanced strength ductility and wear resistance in a friction stir processing engineered AZ31B/TiC magnesium-based nanocomposites. Can. Metall. Q. 2024;63:1150–1168. doi: 10.1080/00084433.2023.2289800. DOI
Wen W.A.N.G., Fang Yuan, Peng Pai, Zhang Zhi-juan, Han Peng, Zhang Ting, Zhi-hao L.I.U., Guan Xiao-hu, Wang Zhi, Qiao Ke, Wang Kuai-she. Microstructure, mechanical and wear properties of AZ31/CoCrFeNi composites fabricated by friction stir processing. Trans. Nonferrous Met. Soc. China. 2023;33:2328–2339. doi: 10.1016/S1003-6326(23)66262-4. DOI
Guo Chengwei, Jasim Dheyaa J., Paidar Moslem, Mahariq Ibrahim, Šlapáková Michaela, Alfredi Daniel, Mehrez Sadok, Zou Yunhe. Unveiling the vibration effect on microstructure and tribological characteristics of AZ80 Mg/AlCrFeMoNb surface composite developed by friction stir processing. Vacuum. 2024;230 doi: 10.1016/j.vacuum.2024.113667. DOI
Satish Kumar T., Thankachan Titus, Shalini S. Microstructure, hardness and wear behavior of ZrC particle reinforced AZ31 surface composites synthesized via friction stir processing. Sci. Rep. 2023;13 doi: 10.1038/s41598-023-47381-5. PubMed DOI PMC
Abdollahzadeh A., Bagheri Vanani B., Masoudi Morghmaleki A., Ostovari Moghaddam A., Eivani A.R. Advancements in joining Al-Zn-TiC-Mg composites using friction stir welding process: influence of traverse speed. J. Compos. Mater. 2024;58(26):2757–2779. doi: 10.1177/00219983241274502. DOI
Abdollahzadeh A., Bagheri Vanani B., Koohdar H., et al. Multi-pass friction stir welding of Al–TiC–Zn–Mg composite: microstructure and mechanical characteristics. Metallogr. Microstruct. Anal. 2024;13:601–623. doi: 10.1007/s13632-024-01117-7. DOI
Abdollahzadeh A., Vanani B.B., Koohdar H., et al. Influence of variation ambient system on dissimilar friction stir welding of Al alloy to Mg alloy by the addition of nanoparticles and interlayer. Met. Mater. Int. 2024;30:2830–2852. doi: 10.1007/s12540-024-01670-4. DOI
Bagheri Vanani Behrouz, Amin Abdollahzadeh. Fabrication of reinforced Al–Mg composite by TiC particles via FSW: microstructure and tribology study. J. Mater. Res. Technol. 2024;30:6787–6801. doi: 10.1016/j.jmrt.2024.05.066. DOI
Esen Z., Dikici B., Duygulu O., Dericioglu A.F. Titanium-magnesium based composites: mechanical properties and in-vitro corrosion response in Ringer's solution. Mater. Sci. Eng. 2013;573:119–126. doi: 10.1016/j.msea.2013.02.040. DOI
Hassan S.F., Gupta M. Development of ductile magnesium composite materials using titanium as reinforcement. J. Alloys Compd. 2002;345:246–251. doi: 10.1016/S0925-8388(02)00413-9. DOI
Chichili D.R., Ramesh K.T., Hemker K.J. The high-strain-rate response of alpha- titanium: experiments, deformation mechanisms and modeling. Acta Mater. 1998;46:1025–1043. doi: 10.1016/S1359-6454(97)00287-5. DOI
Dular Matevz, Stoffel Bernd, Sirok Brane. Development of a cavitation erosion model. Wear. 2006;261:642–655. doi: 10.1016/j.wear.2006.01.020. DOI
