In the field of orthopedic surgery, large bone defects resulting from trauma, surgical resection, or congenital anomalies present significant challenges. In many cases, treatment necessitates scaffold structures that not only support bone regeneration but also address potential bacterial infections that can impede healing. In this study, we developed 3D bioprinted scaffolds using hydrogel-based biomaterial ink comprising a blend of chitosan (CS) and agarose (AG), each separately fortified with ZnO, MgO, and CaO nanoparticles (NPs). We performed a comprehensive assessment of the inks' printability and wettability, and ascertained their rheological properties. The in vitro degradation of 3D bioprinted scaffolds was analyzed, their antibacterial capabilities against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were explored, and the differentiation of bone marrow mesenchymal stem cells (BMSCs) was evaluated. The findings indicated that the hydrogel, CS-AG (CA), composed of 3.5% (w/v) CS and 1.5% (w/v) AG, demonstrated superior printing characteristics. Among the nanoparticles, ZnO proved to be a notable booster of antibacterial activity and facilitated osteogenic differentiation and proliferation of bone marrow stem cells. Conversely, MgO showed similar antibacterial efficacy but was less successful in promoting cell proliferation compared to ZnO and CaO, whereas CaO displayed the weakest antibacterial efficacy. The results identify the ZnO NP-loaded CA biomaterial ink as a viable option for addressing bone abnormalities, enhancing bone repair, and preventing bacterial infection.

Delong Instruments a s Brno Czech Republic

Department of Biomedical Engineering Faculty of Electrical Engineering and Communication Technologies Brno University of Technology Brno Czech Republic

Department of Microelectronics Faculty of Electrical Engineering and Communication Brno University of Technology Brno Czech Republic

Zobrazit více v PubMed

Liao Y., Zhang X.‐L., Li L., Shen F.‐M., and Zhong M.‐K., “Stem Cell Therapy for Bone Repair: a Systematic Review and Meta‐Analysis of Preclinical Studies with Large Animal Models,” British Journal of Clinical Pharmacology 78, no. 4 (2014): 718–726. PubMed PMC

Jiang S., Wang M., and He J., “A Review of Biomimetic Scaffolds for Bone Regeneration: Toward a Cell‐Free Strategy,” Bioengineering & Translational Medicine 6, no. 2 (2021): 10206. PubMed PMC

He Y., Jin Y., Ying X., et al., “Development of an Antimicrobial Peptide‐loaded Mineralized Collagen Bone Scaffold for Infective Bone Defect Repair,” Regen Biomater 7, no. 5 (2020): 515–525. PubMed PMC

Veerachamy S., Yarlagadda T., Manivasagam G., and Yarlagadda P. K., “Bacterial Adherence and Biofilm Formation on Medical Implants: a Review,” Proceedings of the Institution of Mechanical Engineers 228, no. 10 (2014): 1083–1099. PubMed

Bello S. A., Cruz‐Lebrón J., Rodríguez‐Rivera O. A., and Nicolau E., “Bioactive Scaffolds as a Promising Alternative for Enhancing Critical‐Size Bone Defect Regeneration in the Craniomaxillofacial Region,” ACS Applied Bio Materials 6, no. 11 (2023): 4465–4503. PubMed

Zhang X., He J., Qiao L., et al., “3D printed PCLA Scaffold with Nano‐Hydroxyapatite Coating Doped Green Tea EGCG Promotes Bone Growth and Inhibits Multidrug‐Resistant Bacteria Colonization,” Cell Proliferation 55, no. 10 (2022) 13289. PubMed PMC

Ye X., He Z., Liu Y., et al., “Cryogenic 3D Printing of w/o Pickering Emulsions Containing Bifunctional Drugs for Producing Hierarchically Porous Bone Tissue Engineering Scaffolds with Antibacterial Capability,” International Journal of Molecular Sciences 23, no. 17 (2022): 9722. PubMed PMC

Yu L., Sun F., Wang Y., et al., “Effects of MgO Nanoparticle Addition on the Mechanical Properties, Degradation Properties, Antibacterial Properties and in Vitro and in Vivo Biological Properties of 3D‐printed Zn Scaffolds,” Bioactive Materials 37 (2024): 72–85. PubMed PMC

Christy P. N., Basha S. K., and Kumari V. S., “Nano Zinc Oxide and Nano Bioactive Glass Reinforced Chitosan/Poly(vinyl alcohol) Scaffolds for Bone Tissue Engineering Application,” Materials Today Communications 31 (2022): 103429.

Canales D. A., Piñones N., Saavedra M., et al., “Fabrication and Assessment of Bifunctional Electrospun Poly(l‐lactic acid) Scaffolds with Bioglass and Zinc Oxide Nanoparticles for Bone Tissue Engineering,” International Journal of Biological Macromolecules 228 (2023): 78–88. PubMed

Pan H., Gao H., Li Q., et al., “Engineered Macroporous Hydrogel Scaffolds PubMed

Münchow E. A., Pankajakshan D., Albuquerque M. T. P., et al., “Synthesis and Characterization of CaO‐loaded Electrospun Matrices for Bone Tissue Engineering,” Clinical Oral Investigations 20, no. 8 (2016): 1921–1933. PubMed PMC

Safiaghdam H., Nokhbatolfoghahaei H., Farzad‐Mohajeri S., et al., “3D‐printed MgO Nanoparticle Loaded Polycaprolactone β ‐Tricalcium Phosphate Composite Scaffold for Bone Tissue Engineering Applications: in‐Vitro and In‐Vivo Evaluation,” Journal of Biomedical Materials Research Part A 111, no. 3 (2023): 322–339. PubMed

Monavari M., Homaeigohar S., Fuentes‐Chandía M., et al., “3D printing of Alginate Dialdehyde‐gelatin (ADA‐GEL) Hydrogels Incorporating Phytotherapeutic Icariin Loaded Mesoporous SiO2‐CaO Nanoparticles for Bone Tissue Engineering,” Materials Science and Engineering: C 131 (2021): 112470. PubMed

Fielding G. and Bose S., “SiO2 and ZnO Dopants in Three‐dimensionally Printed Tricalcium Phosphate Bone Tissue Engineering Scaffolds Enhance Osteogenesis and Angiogenesis in Vivo,” Acta Biomaterialia 9, no. 11 (2013): 9137–9148. PubMed PMC

Gulati K., Ramakrishnan S., Aw M. S., Atkins G. J., Findlay D. M., and Losic D., “Biocompatible Polymer Coating of Titania Nanotube Arrays for Improved Drug Elution and Osteoblast Adhesion,” Acta Biomaterialia 8, no. 1 (2012): 449–456. PubMed

Nadernezhad A., Caliskan O. S., Topuz F., Afghah F., Erman B., and Koc B., “Nanocomposite Bioinks Based on Agarose and 2D Nanosilicates with Tunable Flow Properties and Bioactivity for 3D Bioprinting,” ACS Applied Bio Materials 2, no. 2 (2019): 796–806. PubMed

Ramasamy N., Sivalingam A., Saravanabhavan S. S., Palani K. N., and Natesan B., “Preparation and Evaluation of Physicochemical Studies of Novel Natural Cellulose Microfibril (CMF) Reinforced Poly (sodium acrylate) Hydrogel,” Carbon Letters 34, no. 2 (2024): 743–755.

Wu Y., Li S., and Chen G., “Hydrogels as Water and Nutrient Reservoirs in Agricultural Soil: a Comprehensive Review of Classification, Performance, and Economic Advantages,” Environment Development and Sustainability 26, no. 10 (2023): 24653–24685.

Rashid H., Lucas H., Busse K., Kressler J., Mäder K., and Trutschel M.‐L., “Development of Poly(sorbitol adipate)‐g‐poly(ethylene glycol) Mono Methyl Ether‐Based Hydrogel Matrices for Model Drug Release,” Gels 10, no. 1 (2023): 17. PubMed PMC

Fohlerova Z., Kamnev K., Sepúlveda M., Pytlicek Z., Prasek J., and Mozalev A., “Nanostructured Zirconium‐Oxide Bioceramic Coatings Derived from the Anodized Al/Zr Metal Layers,” Advanced Materials Interfaces 8, no. 14 (2021): 2100256.

Bahrami S., Hassanzadeh‐Afruzi F., and Maleki A., “Synthesis and Characterization of a Novel and Green Rod‐like Magnetic ZnS/CuFe 2 O 4 /Agar Organometallic Hybrid Catalyst for the Synthesis of Biologically‐Active 2‐Amino‐Tetrahydro‐4 H ‐Chromene‐3‐Carbonitrile Derivatives,” Applied Organometallic Chemistry 34, no. 11 (2020): 5949.

Attasgah R. B., Velasco‐Rodríguez B., Pardo A., et al., “Development of Functional Hybrid Scaffolds for Wound Healing Applications,” Iscience 25, no. 4 (2022): 104019. PubMed PMC

Mendoza‐Villafaña J. J., VE F.‐G., León‐Campos M. I., et al., “Impact of Incorporating Silver Nanoparticles (AgNPs) into Collagen‐PU‐PEG Hydrogels for Superior Antibacterial Efficacy in Severe Wounds,” Asian Journal of Basic Science & Research 06, no. 02 (2024): 50–63.

Sutradhar S., Saha P., Chowdhury A., and Das S., “Reduction of Electromagnetic Pollution by the Enhancement of Microwave Absorption of Strontium Hexaferrite Functionalized Poly(vinylidene fluoride) Composite Film,” Materials Research Express 6 (2019): 086424.

Ikram M., Muhammad Khan A., Haider A., Haider J., Naz S., and Ul‐Hamid A., “Facile Synthesis of La‐ and Chitosan‐Doped CaO Nanoparticles and Their Evaluation for Catalytic and Antimicrobial Potential with Molecular Docking Studies,” ACS Omega 7 (2022): 28459–28470. PubMed PMC

Ramanujam K. and Sundrarajan M., “Antibacterial Effects of Biosynthesized MgO Nanoparticles Using Ethanolic Fruit Extract of Emblica officinalis,” Journal of Photochemistry and Photobiology B Biology 141 (2014): 296–300. PubMed

Doan Thi T. U., Nguyen T. T., Thi Y. D., Ta Thi K. H., Phan B. T., and Pham K. N., “Green Synthesis of ZnO Nanoparticles Using Orange Fruit Peel Extract for Antibacterial Activities,” RSC Advances 10, no. 40 (2020): 23899–23907. PubMed PMC

Suflet D. M., Popescu I., Pelin I. M., et al., “Dual Cross‐Linked Chitosan/PVA Hydrogels Containing Silver Nanoparticles with Antimicrobial Properties,” Pharmaceutics 13, no. 9 (2021): 1461. PubMed PMC

Takeno H., Aoki Y., and Kimura K., “Effects of Silica and Clay Nanoparticles on the Mechanical Properties of Poly(vinyl alcohol) Nanocomposite Hydrogels,” Colloids and Surfaces A: Physicochemical and Engineering Aspects 630 (2021): 127592.

Zuo P. P., Feng H. F., Xu Z. Z., et al., “Fabrication of Biocompatible and Mechanically Reinforced Graphene Oxide‐chitosan Nanocomposite Films,” Chemistry Central Journal 25, no. 1 (2013): 39. PubMed PMC

Khan A., Goepel M., Colmenares J. C., and Gläser R., “Chitosan‐Based N‐Doped Carbon Materials for Electrocatalytic and Photocatalytic Applications,” ACS Sustainable Chemistry & Engineering 8, no. 12 (2020): 4708–4727.

Shin S. and Hyun J., “Rheological Properties of Cellulose Nanofiber Hydrogel for High‐fidelity 3D Printing,” Carbohydrate Polymers 263 (2021): 117976. PubMed

Singh I., Dixit K., Gupta P., George S. M., Sinha N., and Balani K., “3D‐Printed Multifunctional Ag/CeO PubMed

Guo H., Ge J., Wu H., Zhang T., and Zhao A., “Enhancing Temperature Resistance of Polymer Gels by Hybrid with Silica Nanoparticles,” Petroleum Science and Technology 40, no. 24 (2022): 3037–3059.

Wang K., Yin R., Lu Y., et al., “Soft‐hard Hybrid Covalent‐network Polymer Sponges with Super Resilience, Recoverable Energy Dissipation and Fatigue Resistance under Large Deformation,” Materials Science and Engineering: C 126 (2021): 112185. PubMed

Sun D., Gao Y., Zhou Y., et al., “Enhance Fracture Toughness and Fatigue Resistance of Hydrogels by Reversible Alignment of Nanofibers,” ACS Applied Materials & Interfaces 14, no. 43 (2022): 49389–49397. PubMed

Jin C., Wu Q., Zhang H., Yang G., Yuan X., and Fu H., “Study on Preparation, Stability, Thermal Conductivity, and Viscosity of Silver Nanoparticles‐decorated Three‐dimensional Graphene‐Like Porous Carbon Hybrid Nanofluids,” Nanotechnology 32, no. 24 (2021): 245712. PubMed

Hu L., Song C., Li H., et al., “Oxidized Dextran/Chitosan Hydrogel Engineered with Tetrasulfide‐Bridged Silica Nanoparticles for Postsurgical Treatment,” Macromolecular Bioscience 24, no. 1 (2024): 2200565. PubMed

Abou‐Taleb H. A., Fathalla Z., Naguib D. M., Fatease A. A., and Abdelkader H., “Chitosan/Solid‐Lipid Nanoparticles Hybrid Gels for Vaginal Delivery of Estradiol for Management of Vaginal Menopausal Symptoms,” Pharmaceuticals 16, no. 9 (2023): 1284. PubMed PMC

Daguano J. K. M. B., Giora F. C., Santos K. F., et al., “Shear‐thinning Sacrificial Ink for Fabrication of Biosilicate® Osteoconductive Scaffolds by Material Extrusion 3D Printing,” Materials Chemistry and Physics 287 (2022): 126286.

Hu L., Song C., Li H., et al., “Oxidized Dextran/Chitosan Hydrogel Engineered with Tetrasulfide‐Bridged Silica Nanoparticles for Postsurgical Treatment,” Macromolecular Bioscience 24, no. 1 (2024) 2200565. PubMed

Bashir M. H., Korany N. S., Farag D. B. E., et al., “Polymeric Nanocomposite Hydrogel Scaffolds in Craniofacial Bone Regeneration: a Comprehensive Review,” Biomolecules 13, no. 2 (2023): 205. PubMed PMC

Jonnalagadda J. B., Rivero I. V., and Warzywoda J., “In‐vitro Degradation Characteristics of Poly(e‐caprolactone)/Poly(glycolic acid) Scaffolds Fabricated via Solid‐state Cryomilling,” Journal of Biomaterials Applications 30, no. 4 (2015): 472–483. PubMed

Correa S. O., Luo X., and Raub C. B., “Microfluidic Fabrication of Stable Collagen Microgels with Aligned Microstructure Using Flow‐driven co‐deposition and Ionic Gelation,” Journal of Micromechanics and Microengineering 30, no. 8 (2020): 085002. PubMed PMC

Côté A. S., Cormack A. N., and Tilocca A., “Influence of Calcium on the Initial Stages of the Sol–Gel Synthesis of Bioactive Glasses,” Journal of Physical Chemistry B 120, no. 45 (2016): 11773–11780. PubMed

Picker A., Nuss H., Guenoun P., and Chevallard C., “Polymer Vesicles as Microreactors for Bioinspired Calcium Carbonate Precipitation,” Langmuir 27, no. 7 (2011): 3213–3218. PubMed

Butler M. F., Frith W. J., Rawlins C., Weaver A. C., and Heppenstall‐Butler M., “Hollow Calcium Carbonate Microsphere Formation in the Presence of Biopolymers and Additives,” Crystal Growth & Design 9, no. 1 (2009): 534–545.

Politi Y., Batchelor D. R., Zaslansky P., et al., “Role of Magnesium Ion in the Stabilization of Biogenic Amorphous Calcium Carbonate: a Structure−Function Investigation,” Chemistry of Materials 22, no. 1 (2010): 161–166.

Somasundaram S., Ionescu M., and Mathan B., “Ion Implantation of Calcium and Zinc in Magnesium for Biodegradable Implant Applications,” Metals (Basel) 8, no. 1 (2018): 30.

Zhang M., Wang X., Zhang S., et al., “Fabrication and Properties of a Biodegradable Zn‐Ca Composite,” Materials 16, no. 19 (2023): 6432. PubMed PMC

Hernández‐Escobar D., Pajares‐Chamorro N., Chatzistavrou X., Hankenson K. D., Hammer N. D., and Boehlert C. J., “Tailored Coatings for Enhanced Performance of Zinc–Magnesium Alloys in Absorbable Implants,” ACS Biomaterials Science & Engineering 10, no. 1 (2024): 338–354. PubMed

Garimella A., Awale G., Parai R., Ghosh S. B., and Bandyopadhyay‐Ghosh S., “An Integrated Approach to Develop Engineered Metal Composite Bone Scaffold with Controlled Degradation,” Materials Technology 34, no. 14 (2019): 858–866.

Kubásek J., Dvorský D., Capek J., Pinc J., and Vojtech D., “Zn‐Mg Biodegradable Composite: Novel Material with Tailored Mechanical and Corrosion Properties,” Materials 12, no. 23 (2019): 3930. PubMed PMC

Lee J. E., Heo S. W., Kim C. H., Park S. J., Park S.‐H., and Kim T. H., “In‐situ Ionic Crosslinking of 3D Bioprinted Cell‐hydrogel Constructs for Mechanical Reinforcement and Improved Cell Growth,” Biomaterials Advances 147 (2023): 213322. PubMed

Zheng Q., Liu L., Hu Z., et al., “Altering the Zn

Zhang X., Xiao Y., Guo S., et al., “pH‐sensitive Zinc Oxide Nanoparticle‐controlled Sodium Alginate/Silica Hydrogel Beads: for Controlled Curcumin Release,” Journal of Molecular Structure 1324 (2025): 140967.

Zhang H., Yu R., Xia Y., et al., “Effect of Magnesium and Calcium Ions on the Strength and Biofunctionality of GelMA/SAMA Composite Hydrogels,” Journal of Materials Chemistry B 12, no. 41 (2024): 10692–10704. PubMed

Sabbagh F., Kiarostami K., Mahmoudi Khatir N., Rezania S., and Muhamad I. I., “Green Synthesis of Mg0.99 Zn0.01O Nanoparticles for the Fabrication of κ‐Carrageenan/NaCMC Hydrogel in Order to Deliver Catechin,” Polymers (Basel) 12, no. 4 (2020): 861. PubMed PMC

Avdeeva E., Porokhova E., Khlusov I., et al., “Calcium Chelidonate: Semi‐Synthesis, Crystallography, and Osteoinductive Activity in Vitro and in Vivo,” Pharmaceuticals 14, no. 6 (2021): 579. PubMed PMC

Hung K.‐C. and Hsu S.‐H., “Polymer Surface Interacts with Calcium in Aqueous Media to Induce Stem Cell Assembly,” Advanced Healthcare Materials 4, no. 15 (2015): 2186–2194. PubMed

Pina S., Canadas R. F., Jiménez G., et al., “Biofunctional Ionic‐Doped Calcium Phosphates: Silk Fibroin Composites for Bone Tissue Engineering Scaffolding,” Cells Tissues Organs 204, no. 3–4 (2017): 150–163. PubMed

Jo Y. J., Choi E. Y., Choi N. W., and Kim C. K., “Antibacterial and Hydrophilic Characteristics of Poly(ether sulfone) Composite Membranes Containing Zinc Oxide Nanoparticles Grafted with Hydrophilic Polymers,” Industrial & Engineering Chemistry Research 55, no. 28 (2016): 7801–7809.

Mehrvarz A., Khalil‐Allafi J., Etminanfar M., and Mahdavi S., “The Study of Morphological Evolution, Biocorrosion Resistance, and Bioactivity of Pulse Electrochemically Deposited Hydroxyapatite/ZnO Composite on NiTi Superelastic Alloy,” Surface & Coatings Technology 423 (2021): 127628.

George D., Maheswari P. U., Sheriffa Begum K. M. M., and Arthanareeswaran G., “Biomass‐Derived Dialdehyde Cellulose Cross‐linked Chitosan‐Based Nanocomposite Hydrogel with Phytosynthesized Zinc Oxide Nanoparticles for Enhanced Curcumin Delivery and Bioactivity,” Journal of Agricultural and Food Chemistry 67, no. 39 (2019): 10880–10890. PubMed

Adhikari N. M., Tuladhar A., Wang Z., De Yoreo J. J., and Rosso K. M., “No Hydrogen Bonding between Water and Hydrophilic Single Crystal MgO Surfaces?,” The Journal of Physical Chemistry C 125, no. 47 (2021): 26132–26138.

cheng C. C., PB M., Shinoda W., and Nielsen S. O., “Size‐dependent Hydrophobic to Hydrophilic Transition for Nanoparticles: a Molecular Dynamics Study,” Journal of Chemical Physics 131, no. 24 (2009) 244706. PubMed

Campea M. A., Majcher M. J., Lofts A., and Hoare T., “A Review of Design and Fabrication Methods for Nanoparticle Network Hydrogels for Biomedical, Environmental, and Industrial Applications,” Advanced Functional Materials 31, no. 33 (2021) 2102355.

Lee Y. K., Song J., Moon H. J., et al., “In Vitro and In Vivo Evaluation of Non‐Crystalline Calcium Phosphate Glass as a Bone Substitute,” Key Engineering Materials 254 (2003): 185–188.

Kalra K., Chhabra V., and Prasad N., “Antibacterial Activities of Zinc Oxide Nanoparticles: a Mini Review,” Journal of Physics: Conference Series 2267, no. 1 (2022): 012049.

D'Orazio M., Mastropasqua M. C., Cerasi M., Pacello F., Consalvo A., and Chirullo B., “The Capability of Pseudomonas aeruginosa to Recruit Zinc under Conditions of Limited Metal Availability Is Affected by Inactivation of the ZnuABC Transporter,” Metallomics 7, no. 6 (2015): 1023–1035. PubMed PMC

Xiong F., Wen D., and Li Q., “Calcium‐Mediated Regulation Promotes the Biofilm Formation of Two Novel Pyridine‐Degrading Bacteria,” Frontiers in Environmental Science 10 (2022): 815528.

Romani A. M. P., “Cellular Magnesium Homeostasis,” Archives of Biochemistry and Biophysics 512, no. 1 (2011): 1–23. PubMed PMC

Lakhkar N. J., Lee I.‐H., Kim H.‐W., Salih V., Wall I. B., and Knowles J. C., “Bone Formation Controlled by Biologically Relevant Inorganic Ions: Role and Controlled Delivery from Phosphate‐based Glasses,” Advanced Drug Delivery Reviews 65, no. 4 (2013): 405–420. PubMed

Xia Y., Guo Y., Yang Z., et al., “Iron Oxide Nanoparticle‐calcium Phosphate Cement Enhanced the Osteogenic Activities of Stem Cells through WNT/β‐catenin Signaling,” Materials Science and Engineering: C 104 (2019): 109955. PubMed

Zhang Y., Lin T., Meng H., et al., “3D gel‐printed Porous Magnesium Scaffold Coated with Dibasic Calcium Phosphate Dihydrate for Bone Repair in Vivo,” Journal of Orthopaedic Translation 33 (2022): 13–23. PubMed PMC

Bowen R. A. R. and Remaley A. T., “Interferences from Blood Collection Tube Components on Clinical Chemistry Assays,” Biochem Med (Zagreb) (2014): 31–44. PubMed PMC

Coelho C. C., Padrão T., Costa L., et al., “The Antibacterial and Angiogenic Effect of Magnesium Oxide in a Hydroxyapatite Bone Substitute,” Scientific Reports 10, no. 1 (2020): 19098. PubMed PMC

Rodríguez‐Lugo V., Angeles C., De La Isla A., and Castano V. M., “Effect of Bio‐calcium Oxide on the Morphology of Hydroxyapatite,” International Journal of Basic and Applied Sciences 4, no. 4 (2015): 395–403.

S A. and Kavitha H. P., “Magnesium Oxide Nanoparticles: Effective Antilarvicidal and Antibacterial Agents,” ACS Omega 8, no. 6 (2023): 5225–5233. PubMed PMC

Xia Y., Chen H., Zhang F., et al., “Injectable Calcium Phosphate Scaffold with Iron Oxide Nanoparticles to Enhance Osteogenesis via Dental Pulp Stem Cells,” Artif Cells Nanomed Biotechnol 46, no. sup1 (2018): 423–433. PubMed

Budiraharjo R., Neoh K. G., and Kang E.‐T., “Enhancing Bioactivity of Chitosan Film for Osteogenesis and Wound Healing by Covalent Immobilization of BMP‐2 or FGF‐2,” Journal of Biomaterials Science, Polymer Edition 24, no. 6 (2013): 645–662. PubMed