Significant malrotation of the femur after osteosynthesis is a serious complication of treatment and has a number of consequences for the patients and causes deterioration of their quality of life. Therefore, it is necessary to be familiar with intraoperative techniques to control the correct rotation, mostly clinical and radiological, which give us the possibility to minimize rotational errors. In the postoperative period, with even a slight suspicion of malrotation, it is necessary to proceed to its exact verification and, in indicated cases, to perform necessary correction. We recommend one of the CT techniques as a very reliable method, however in younger patients we prefer to use MRI. Early diagnosis of the rotational error and especially its size is essential from the point of view of potential reconstructive surgery, which is then chosen also with regard to the location of the original lesion. Key words: femoral osteosynthesis, limb malrotation, methods of measuring.

• MeSH
• femur chirurgie   diagnostické zobrazování   MeSH
• fraktury femuru * chirurgie   MeSH
• lidé MeSH
• magnetická rezonanční tomografie metody   MeSH
• počítačová rentgenová tomografie MeSH
• pooperační komplikace diagnóza   etiologie   MeSH
• vnitřní fixace fraktury * škodlivé účinky   metody   MeSH
• Check Tag
• lidé MeSH
• Publikační typ
• anglický abstrakt MeSH
• časopisecké články MeSH
• přehledy MeSH

• MeSH
• femur * abnormality   diagnostické zobrazování   MeSH
• lidé MeSH
• novorozenec MeSH
• vrozené deformity dolní končetiny * diagnostické zobrazování   patologie   terapie   MeSH
• Check Tag
• lidé MeSH
• novorozenec MeSH
• Publikační typ
• přehledy MeSH

PURPOSE OF THE STUDY: Temporary hemiepiphyseodesis using figure-eight plates is currently one of the main surgical techniques to correct axial deformities of lower limbs in paediatric patients. Comprehensive analysis, correct indication and monitoring of treatment are the basic prerequisites for successful therapy. The aim of the study was to analyse parameters that could become an alternative to standard parameters used nowadays, namely the inserted screw angle (SA), and a new parameter - condylar ratio (CR). MATERIAL AND METHODS: The study included 47 patients treated at the Department of Paediatric Surgery, Orthopaedics and Traumatology at the University Hospital in Brno between 2014 and 2021 and diagnosed with idiopathic bilateral axis deviation of lower limbs, namely genu valgum. After having met the inclusion criteria, the patients underwent a clinical check-up, and long leg radiographs were also obtained. Anthropometric parameters (age, sex, BMI, intermalleolar distance (IMD)), duration of treatment as well as radiographic parameters - mechanical lateral distal femoral angle (mLDFA), mechanical medial proximal tibial angle (mMPTA), SA and CR, and their derived parameters expressing the change per unit time and defined as a rate of correction (r-mLDFA, r-mMPTA, r-SA, r-CR) were recorded. The obtained values were subsequently statistically analysed, namely by comparing the pretreatment and posttreatment values and through correlation analysis. RESULTS: The mean age of the population was 11.4 years, BMI 26.9 and IMD 14.1. The mean duration of treatment in the study population was 13.9 months. A significant difference was established between the pretreatment and posttreatment values of all measured radiographic parameters (p<.05). A significant correlation was identified between r-mLDFA and r-SA (p=.002), while no significant correlation was found between r-mLDFA and r-CA or between r-CA and r-SA (p=.650; p=.884). DISCUSSION: Comprehensive evaluation of the treatment of axial deformities of lower limbs and its optimization are crucial for successful therapy. In addition to the standard mechanical or even anatomical parameters assessing the axis deviation of lower limbs, the authors seek to evaluate also other parameters that may provide a new insight into the deformity or offer additional benefits such as reduced radiation exposure. Such a parameter is for instance the angle of inserted screws in the eight-figure plate system, although there is a difference in opinion among the authors. In our study, we concluded that it is the change in the screw angle that significantly correlates with the mechanical axis of the femur, and thus, under certain circumstances, can become a monitoring parameter. Contrarily, the condylar ratio is a newly introduced quantity which in our study did not show any significant correlation with the mechanical axis of the femur, although a significant change before and after therapy was observed. CONCLUSIONS: A significant correlation was established between the rate of change in screw angle and r-mLDFA, which may, under certain circumstances, serve as a parameter for treatment evaluation, with the advantage of reduced radiation exposure since the assessment requires one scan of the knee joints under loading only. On the other hand, though, no significant correlation was established between the CR as the newly defined parameter and r-mLDFA, which is why it can only be considered as a complementary parameter rather than a decisive one. KEY WORDS: temporary hemiepiphysiodesis, growth plate, genua valga, screw angle, correlation.

• MeSH
• dítě MeSH
• femur chirurgie   abnormality   diagnostické zobrazování   MeSH
• genua valga * chirurgie   MeSH
• kostní destičky * MeSH
• kostní šrouby * MeSH
• lidé MeSH
• mladiství MeSH
• radiografie metody   MeSH
• tibie chirurgie   abnormality   diagnostické zobrazování   MeSH
• výsledek terapie MeSH
• Check Tag
• dítě MeSH
• lidé MeSH
• mladiství MeSH
• mužské pohlaví MeSH
• ženské pohlaví MeSH
• Publikační typ
• anglický abstrakt MeSH
• časopisecké články MeSH

PURPOSE: The purpose of this study was to determine whether regular running distance and biomechanics are related to medial central femur cartilage (MCFC) structure. METHODS: The cross-sectional study sample consisted of 1164 runners and nonrunners aged 18-65 yr. Participants completed questionnaires on physical activity and their running history. We performed quantitative magnetic resonance imaging of knee cartilage-T2 relaxation time (T2) mapping (high T2 indicates cartilage degeneration)-and a running biomechanical analysis using a three-dimensional motion capture system. A 14-d monitoring of the physical activity was conducted. RESULTS: Those aged 35-49 yr were at 84% higher odds of having MCFC T2 in the highest level (85th percentile, P < 0.05) compared with youngest adults indicating that MCFC structures may be altered with aging. Being male was associated with 34% lower odds of having T2 at the highest level ( P < 0.05) compared with females. Nonrunners and runners with the highest weekly running distance were more likely to have a high T2 compared with runners with running distance of 6-20 km·wk -1 ( P < 0.05). In addition, the maximal knee internal adduction moment was associated with a 19% lower odds of having T2 at the highest level ( P < 0.05). CONCLUSIONS: Females compared with males and a middle-aged cohort compared with the younger cohort seemed to be associated with the degeneration of MCFC structures. Runners who ran 6-20 km·wk -1 were associated with a higher quality of their MCFC compared with highly active individuals and nonrunners. Knee frontal plane biomechanics was related to MCFC structure indicating a possibility of modifying the medial knee collagen fibril network through regular running.

• MeSH
• běh * fyziologie   MeSH
• biomechanika MeSH
• dospělí MeSH
• femur fyziologie   anatomie a histologie   diagnostické zobrazování   MeSH
• kloubní chrupavka * fyziologie   anatomie a histologie   diagnostické zobrazování   MeSH
• kolenní kloub * fyziologie   diagnostické zobrazování   MeSH
• lidé středního věku MeSH
• lidé MeSH
• magnetická rezonanční tomografie * MeSH
• mladiství MeSH
• mladý dospělý MeSH
• průřezové studie MeSH
• senioři MeSH
• sexuální faktory MeSH
• věkové faktory MeSH
• Check Tag
• dospělí MeSH
• lidé středního věku MeSH
• lidé MeSH
• mladiství MeSH
• mladý dospělý MeSH
• mužské pohlaví MeSH
• senioři MeSH
• ženské pohlaví MeSH
• Publikační typ
• časopisecké články MeSH

PURPOSE OF THE STUDY Patellofemoral stability and congruency are influenced by different parameters. Their contribution to anterior knee pain and instability is not fully understood. We investigated, if isolated femoral antetorsion of more than 25° leads to patellofemoral instability. MATERIAL AND METHODS We analyzed 90 knees in patients with patellofemoral complaints and correlated clinical and radiological characteristics. Patients presenting at our center between January 2018 and December 2020 because of patellofemoral pain or instability were included, provided that there was no previous surgical intervention done. RESULTS The severity of trochlea dysplasia classified using the Oswestry-Bristol classification significantly correlated with events of patellofemoral dislocations. (χ=8.152, p=0.043, φ=0.288). All males with a history of patella dislocation had at least a mild trochlea dysplasia. The majority of females complaining about patellofemoral symptoms in general had a dysplastic trochlea. Patella alta is more frequently found in patients with trochlea dysplasia than in patients with a normal femoral trochlea anatomy. DISCUSSION The majority of unstable patellofemoral joints showed a dysplastic trochlea. A high femoral antetorsion was found to be an additional minor factor contributing to instability. Isolated high femoral antetorsion without trochlea dysplasia rather leads to anterior knee pain without patella dislocation. Furthermore, no direct significant correlation between patella alta and patellofemoral instability was found. Patella alta can therefore rather be seen as a result of a dysplastic trochlea than a primary major risk factor for patellofemoral instability. CONCLUSIONS Trochlea dysplasia is the major risk factor for patellofemoral instability. Patella alta can rather be seen as a result of a dysplastic trochlea than as a primary risk factor for patella instability or pain. Isolated high femoral antetorsion often leads to patellofemoral pain syndrome but not to patella dislocations. Key words: MPFL, patella instability, patellofemoral instability.

• MeSH
• bolest komplikace   MeSH
• femur diagnostické zobrazování   chirurgie   MeSH
• kolenní kloub diagnostické zobrazování   chirurgie   MeSH
• lidé MeSH
• luxace pately * komplikace   diagnostické zobrazování   MeSH
• nestabilita kloubu * diagnostické zobrazování   etiologie   MeSH
• patela chirurgie   MeSH
• Check Tag
• lidé MeSH
• mužské pohlaví MeSH
• ženské pohlaví MeSH
• Publikační typ
• časopisecké články MeSH

PURPOSE: The calcar femorale (femoral calcar) is used in the English literature to designate the thickened medial cortex of the femoral neck. This term is, however, incorrect, as the calcar femorale is actually quite another structure. METHODS: Searching was performed in original and historic publication. RESULTS: The importance of the thickened medial cortex of the proximal femur in femoral neck fractures was discussed already by Robert Adams in 1834-1836. Therefore, the German surgeon C.W. Streubel, in 1847, called it Adamscher Knochenbogen (Adams' arch). Due to misspelling, this term was gradually changed to Adambogen, and at the turn of twentieth century, it was commonly used primarily in the German literature. Then, it fell into oblivion and its "renaissance" came as late as during the 1960s, again in the German literature, in connection with operative treatment of trochanteric fractures. CONCLUSIONS: However, under the influence of the English literature, it has been replaced by the term calcar femorale (femoral calcar), used ever since. The term Adams' arch should be reserved for the thickened medial cortex of the proximal femur, while the term calcar femorale (femoral calcar) should be used for the vertical plate arising from the medial cortex close below the lesser trochanter.

• MeSH
• dolní končetina MeSH
• femur * diagnostické zobrazování   chirurgie   MeSH
• kostní destičky MeSH
• krček femuru * MeSH
• lidé MeSH
• Check Tag
• lidé MeSH
• Publikační typ
• časopisecké články MeSH
• práce podpořená grantem MeSH

PURPOSE: Functional results after internal fixation of trochanteric femoral fractures may be negatively affected by healing in a non-physiological position. The aim of this study was to evaluate the occurrence and severity of femoral malrotation after nailing of trochanteric fractures. MATERIALS AND METHODS: The authors conducted a prospective study focused on a CT analysis of malrotation after intramedullary nailing of trochanteric fractures (AO 31A1-3) in 101 patients. We recorded the type of fracture, method of anesthesia, scheduled surgery vs. acute surgery, and the surgeon's experience as possible risk factors for limb malrotation after trochanteric fracture surgeries. RESULTS: The average extent of malrotation was 9° of internal rotation ranging from 29° of external to 48°of internal rotation. In 35% of patients, we observed a rotation greater than 15°, and in 15 patients (15%), the rotation was greater than 25°. The risk of significant internal malrotation was significantly higher than external malrotation (37 vs. 4 patients). None of the factors observed proved to be statistically significant. The effect of general anesthesia and the type of intertrochanteric fracture came closest to having a significant effect on rotational error. CONCLUSION: Improper reduction of a trochanteric fracture is a common problem that can lead to femur malrotation. In our study, a rotational error greater than 15° occurred in 35% of the patients, but none of the monitored factors represented a statistically significant risk for this complication.

• MeSH
• femur diagnostické zobrazování   chirurgie   MeSH
• fraktury femuru * diagnostické zobrazování   etiologie   chirurgie   MeSH
• fraktury kyčle * komplikace   diagnostické zobrazování   chirurgie   MeSH
• intramedulární fixace fraktury * škodlivé účinky   metody   MeSH
• kostní hřeby škodlivé účinky   MeSH
• lidé MeSH
• počítačová rentgenová tomografie MeSH
• prospektivní studie MeSH
• Check Tag
• lidé MeSH
• Publikační typ
• časopisecké články MeSH

PURPOSE OF THE STUDY The purpose of this study was to evaluate the position of tibial tunnel (TT) and femoral tunnels (FT) performed by using the anteromedial (AM) portal technique and its effect on the aperture of FT. MATERIAL AND METHODS A total 44 patients operated for anterior cruciate ligament (ACL) rupture by AM portal technique between January 2013 and July 2015, were included in this study. They were subjected to a magnetic resonance imaging of the knee to assess the FT, dimensions of the FT aperture and TT. The location of the ACL graft within the joint was compared with the intact ACL of healthy individuals. The patients were also evaluated using Lysholm and IKDC subjective scores for functional outcome. RESULTS The mean FT angle on both the coronal plane (42.88°±5.83°) and the sagittal plane (68.47°±9.57°) was significantly different from the intra-articular part of the hamstring autograft angles (74.93°±7.27° and 58.74°±4.88°, respectively) (p<0.0001). The mean distance of the FT aperture was 13.18 (±2.49) mm on vertical axis, 10.97 (±1.50) mm on the sagittal axis (p<0.0001). The difference between TT axis and the axis of the intra-articular part of autograft on both coronal (72.78°±4.67° and 74.93°±7.27°, respectively) and sagittal planes (60.12°±5.53° and 58.74°±4.88°, respectively) were not significant (p>0.05). DISCUSSION Ilingrowth et al. claimed that the FT were scattered in the very large distance and some of them were placed outside of anatomical range in the series included the cases performed with transtibial and transtibial independent techniques. In this series, in which we used a femoral guide to drill the FT at lateral femoral condyle at 2 or 10 o'clock position depended upon the site of operation, we obtained a consistent FT which is comparable with the intra-articular part of native ACL. Amano et al. found that the FT aperture enlargement was significant in the series when hamstring tendons were used as autograft, over a 6-month period. We also found a significant difference between the narrowest part of the FT (7.01 ± 1.05 mm) and its aperture (10.97 ± 1.50 mm in sagittal, 13.18 ± 2.49 mm in vertical direction). The enlargement was mainly in the vertical direction, due to the fact that the loads resulting from daily life are mostly on the horizontal plane. CONCLUSIONS The direction of intra-articular part of the ACL graft in the cases operated with the AM portal technique is significantly different from the FT direction in both the coronal and sagittal planes. The enlargement of the FT aperture is larger in the vertical axis compared to the sagittal axis. Although the long-term clinical consequences of asymmetrical enlargement of the FT aperture are not known yet, to avoid this potential risk, a technique to approximate the direction of FT to the intra-articular part of the ACL without changing the FT entry site, can be used. Key words: knee, anterior cruciate ligament reconstruction, femoral tunnel, tibial tunnel, anteromedial portal.

• MeSH
• femur diagnostické zobrazování   chirurgie   MeSH
• kolenní kloub diagnostické zobrazování   chirurgie   MeSH
• lidé MeSH
• ligamentum cruciatum anterius diagnostické zobrazování   chirurgie   MeSH
• poranění předního zkříženého vazu * chirurgie   MeSH
• rekonstrukce předního zkříženého vazu * MeSH
• tibie chirurgie   MeSH
• Check Tag
• lidé MeSH
• Publikační typ
• časopisecké články MeSH

AIMS: The aim of this study was to answer the question whether our newly developed injectable biodegradable "self-setting" polymer-composite as a bone adhesive is a good "bone-glue" candidate to efficiently fix comminuted fractures of pig femoral bones used as an ex-vivo experimental model. METHODS: Mechanical properties of adhesive prepared from α-tricalcium phosphate (TCP) powder and thermogelling copolymer were optimized by selecting the appropriate composition with adhesion enhancers based on dopamine and sodium iodinate. Setting time and injectability were controlled by rheology. Ex-vivo experiments of fixed pig bones were provided in terms of either the three-point bending test of bending wedge type fractured pig femurs (with LCP) or the axial compression test of 45° oblique fractured femurs (without LCP) in physiological saline solution at 37 °C. Fractured bones treated with optimized adhesive before and after bending tests were imaged by X-ray microtomography (μCT). RESULTS: Based on the rheological measurement, the adhesive modified with both dopamine and sodium iodinate exhibited optimal thixotropic properties required for injection via thin 22 G needle. This optimal adhesive composition showed an 8 min lag phase (processing time) followed by fast increase in storage modulus at 37 °C up to 1 GPa within 110 min. Self-setting of dopamine/iodinate modified adhesive was completed in 48 h exhibiting the maximum strength at compression of 7.98 MPa ± 1.39 MPa. Whereas unmodified adhesive failed in glue-to-bone adhesion, dopamine and dopamine/iodinate modified adhesive used for 45° oblique fracture fixation showed good and similar strength at compression (3.05 and 2.79 MPa, respectively). However, significantly higher elasticity of about 250% exhibited adhesive with iodinate enhancer. Moreover, mechanical properties of B2 fractures fixed with both LCP and dopamine/iodinate adhesive were approaching closely to the properties of original bone. Excellent adhesion between the adhesive and the bone fragments was proved by μCT. CONCLUSION: The polymer-composite bone adhesive modified with dopamine/iodinate exhibited very good fixation ability of femoral artificial comminuted fractures in an experimental model.

• MeSH
• biomechanika MeSH
• diafýzy MeSH
• femur diagnostické zobrazování   MeSH
• fixace fraktury MeSH
• fraktury femuru * diagnostické zobrazování   MeSH
• kostní cementy * MeSH
• kostní destičky MeSH
• prasata MeSH
• vnitřní fixace fraktury MeSH
• zvířata MeSH
• Check Tag
• zvířata MeSH
• Publikační typ
• časopisecké články MeSH
• práce podpořená grantem MeSH

PURPOSE OF THE STUDY The purpose of the study is to verify the correct alignment of components of the Oxford medial unicompartmental knee arthroplasty using the Zimmer Microplasty® instrumentation at the beginning of the learning curve. The implantation of prosthetic components of partial knee arthroplasty in proper alignment has an effect on long-term survival of the prosthesis and should eliminate the occurrence of frequent complications. MATERIAL AND METHODS The study group includes 20 patients, 9 men with the mean age of 68 years (range 62-78 years) and 11 women with the mean age of 69 years (range 52-81 years). 13 patients underwent surgery on the right knee and 7 patients on the left knee. The mean length of symptoms was 13 months (range 7-20 months), the mean varus knee deformity was 7° (range 4-12°). The selected patients met both the clinical and radiological criteria for enrolment in the study. In all of them medial unicompartmental knee arthroplasty was performed in 2019 by the same surgeon. After surgery, the parameters of accuracy of alignment of individual prosthetic components were measured on the full-length radiograph of the limb under load. The WOMAC score was recorded preoperatively and one year after surgery and subsequently compared. The knee joint flexion preoperatively and one year after surgery was evaluated. RESULTS The analysis of radiographs revealed that in 12 cases the femoral component was implanted in the mean valgus angle of 1.6° (range 1-3°) and in 8 cases in the mean varus angle of 3° (range 1-5°). All femoral components were implanted in the mean flexion of 7.3° (range 3-11°), no component was implanted in extension. As concerns the tibial component, 19 components were implanted in a neutral or minimum varus angle with the mean value of 1.1° (range 0.3-4°). One component only was implanted in the valgus angle of 1°. All tibial components were implanted with the mean dorsal slope of 6.5° (range 4-8°). The incision was 5 mm deep on average (range 3-6 mm). There was a slight divergence between the components, namely 2.8° on average (range 2-7°) and the distance between the components was 4mm on average (range 3-5 mm). The mean knee joint flexion achieved preoperatively by patients was 115° (range 110-123°), whereas postoperatively the mean flexion achieved was 126° (range 111-138°). The preoperative Womac score was 84.5 points on average (range 64-96 points), whereas postoperatively it was 26.4 points on average (range 7-52 points). None of the components was implanted outside the permitted range, no early complications of the partial replacement (luxation of polyethylene mobile bearing insert, early loosening of the prosthesis, tibial fracture) were observed. DISCUSSION Our radiographic measurements show that when Zimmer Microplasty® instrumentation is used correct alignment of the femoral and tibial component can be achieved and the individual components were correctly aligned within the recommended range. Every single component met the required criteria for alignment. When comparing the values obtained by us in measurements with those obtained by other authors from abroad, similar results regarding the alignment of components were achieved. CONCLUSIONS When using Zimmer Microplasty® instrumentation, excellent results can be achieved also at the beginning of the learning curve of partial knee replacement. Key words: medial gonarthrosis, unicompartmental arthroplasty, hemiarthroplasty, alignment of components.

• MeSH
• artróza kolenních kloubů * diagnostické zobrazování   chirurgie   MeSH
• femur diagnostické zobrazování   chirurgie   MeSH
• kolenní kloub diagnostické zobrazování   chirurgie   MeSH
• lidé středního věku MeSH
• lidé MeSH
• protézy kolene * MeSH
• senioři MeSH
• totální endoprotéza kolene * škodlivé účinky   MeSH
• Check Tag
• lidé středního věku MeSH
• lidé MeSH
• mužské pohlaví MeSH
• senioři MeSH
• ženské pohlaví MeSH
• Publikační typ
• časopisecké články MeSH