β-tricalcium phosphate (β-TCP)
Dotaz
Zobrazit nápovědu
This report describes the histological characteristics of large human bone defects that were implanted with β-tricalcium phosphate (β-TCP). Samples were obtained longer after the primary operation than in the earlier studies. We assessed a total of nine biopsies taken 33-208 weeks after implantation. The tissue sections were stained with hematoxylin-eosin for general observation, with Gomori stain to visualize the reticulin fibers, and with an antibody against tartrate-resistant alkaline phosphatase (TRAP) to characterize the cells. Ongoing bone remodeling was observed even 208 weeks after implantation as determined by the presence of osteoclasts and active osteoblasts and new woven and lamellar bone. We observed multinuclear giant cells phagocytosing the biomaterial and the attachment of osteoclasts to the β-TCP. The osteoclasts showed intense TRAP positivity, while the giant cells showed variable TRAP positivity. There was a zonal pattern in the original defects: The central regions showed granules and fibrous septa, while peripheral areas showed a layer of new bone formation. These data demonstrate ongoing bone remodeling long after implantation in the peripheral regions of the original defects as well as fibrous changes in the central regions and phagocytosis of biomaterial by multinuclear giant cells.
- MeSH
- biopsie MeSH
- dítě MeSH
- dospělí MeSH
- fosforečnany vápenaté terapeutické užití MeSH
- kosti a kostní tkáň patologie MeSH
- kostní náhrady terapeutické užití MeSH
- lidé středního věku MeSH
- lidé MeSH
- mladiství MeSH
- mladý dospělý MeSH
- nemoci kostí patologie terapie MeSH
- osteoblasty patologie MeSH
- osteoklasty patologie MeSH
- remodelace kosti MeSH
- Check Tag
- dítě MeSH
- dospělí MeSH
- lidé středního věku MeSH
- lidé MeSH
- mladiství MeSH
- mladý dospělý MeSH
- mužské pohlaví MeSH
- ženské pohlaví MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
Streptococcus mutans is one of the bacteria that initiates the colonization of the pellicle at the tooth surface. It forms a plaque, together with other bacteria, which gradually dissolves the pellicle and leaves the tooth surface unprotected against the acidic oral environment. Calcium phosphate ceramics are excellent synthetic materials for the study of biofilm formation in dentistry because they are comparable to teeth in chemical composition and structure. Calcium phosphates can be processed to achieve a variety of crystalline compounds with biologically relevant ionic substitutions and structures that allow study of the effect of the surface chemistry and the topography independently. In this article, we describe the preparation and characterization of three types of calcium phosphate-based materials as a suitable surface for the formation of the S. mutans biofilm: beta-tricalcium phosphate (β-TCP); sintered hydroxyapatite (SHA); and calcium-deficient hydroxyapatite (CDHA). The densest biofilms were formed on the surfaces of SHA and CDHA, with no significant differences due to the stoichiometry or microstructure. In contrast, β-TCP showed a lower susceptibility to S. mutans biofilm formation, suggesting that the crystalline structure is the controlling parameter. Subsequently, SHA was selected to develop a dental biofilm model that allowed study of S. mutans biofilm susceptibility to chlorhexidine and ethanol.
Due to unique osteogenic properties, tricalcium phosphate (TCP) has gained relevance in the field of bone repair. The development of novel and rapid sintering routes is of particular interest since TCP undergoes to high-temperature phase transitions and is widely employed in osteoconductive coatings on thermally-sensitive metal substrates. In the present work, TCP bioceramics was innovatively obtained by Ultrafast High-temperature Sintering (UHS). Ca-deficient hydroxyapatite nano-powder produced by mechanochemical synthesis of mussel shell-derived calcium carbonate was used to prepare the green samples by uniaxial pressing. These were introduced within a graphite felt which was rapidly heated by an electrical current flow, reaching heating rates exceeding 1200 °C min-1. Dense (> 93%) ceramics were manufactured in less than 3 min using currents between 25 and 30 A. Both β and α-TCP were detected in the sintered components with proportions depending on the applied current. Preliminary tests confirmed that the artifacts do not possess cytotoxic effects and possess mechanical properties similar to conventionally sintered materials. The overall results prove the applicability of UHS to bioceramics paving the way to new rapid processing routes for biomedical components.
Regeneration of large bone defects caused by trauma or tumor resection remains one of the biggest challenges in orthopedic surgery. Because of the limited availability of autograft material, the use of artificial bone is prevalent; however, the primary role of currently available artificial bone is restricted to acting as a bone graft extender owing to the lack of osteogenic ability. To explore whether surface modification might enhance artificial bone functionality, in this study we applied low-pressure plasma technology as next-generation surface treatment and processing strategy to chemically (amine) modify the surface of beta-tricalcium phosphate (β-TCP) artificial bone using a CH4/N2/He gas mixture. Plasma-treated β-TCP exhibited significantly enhanced hydrophilicity, facilitating the deep infiltration of cells into interconnected porous β-TCP. Additionally, cell adhesion and osteogenic differentiation on the plasma-treated artificial bone surfaces were also enhanced. Furthermore, in a rat calvarial defect model, the plasma treatment afforded high bone regeneration capacity. Together, these results suggest that amine modification of artificial bone by plasma technology can provide a high osteogenic ability and represents a promising strategy for resolving current clinical limitations regarding the use of artificial bone.
- MeSH
- biokompatibilní materiály metabolismus MeSH
- buněčná diferenciace fyziologie MeSH
- fosforečnany vápenaté metabolismus MeSH
- kostní náhrady metabolismus terapeutické užití MeSH
- krysa rodu rattus MeSH
- osteogeneze fyziologie MeSH
- regenerace kostí fyziologie MeSH
- transplantace kostí metody MeSH
- zvířata MeSH
- Check Tag
- krysa rodu rattus MeSH
- zvířata MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
The structure degradation and strength changes of calcium phosphate scaffolds after long-term exposure to an acidic environment simulating the osteoclastic activity were determined and compared. Sintered calcium phosphate scaffolds with different phase structures were prepared with a similar cellular pore structure and an open porosity of over 80%. Due to microstructural features the biphasic calcium phosphate (BCP) scaffolds had a higher compressive strength of 1.7 MPa compared with the hydroxyapatite (HA) and β-tricalcium phosphate (TCP) scaffolds, which exhibited a similar strength of 1.2 MPa. After exposure to an acidic buffer solution of pH = 5.5, the strength of the HA scaffolds did not change over 14 days. On the other hand, the strength of the TCP scaffolds decreased steeply in the first 2 days and reached a negligible value of 0.09 MPa after 14 days. The strength of the BCP scaffolds showed a steady decrease with a reasonable value of 0.5 MPa after 14 days. The mass loss, phase composition and microstructural changes of the scaffolds during degradation in the acidic environment were investigated and a mechanism of scaffold degradation was proposed. The BCP scaffold showed the best cell response in the in vitro tests. The BCP scaffold structure with the highly soluble phase (α-TCP) embedded in a less soluble matrix (β-TCP/HA) exhibited a controllable degradation with a suitable strength stability and with beneficial biological behavior it represented the preferred calcium phosphate structure for a resorbable bone scaffold.
- MeSH
- buněčná adheze MeSH
- DNA metabolismus MeSH
- fosforečnany vápenaté chemie MeSH
- keramika chemie MeSH
- koncentrace vodíkových iontů MeSH
- kosti a kostní tkáň fyziologie MeSH
- lidé MeSH
- mezenchymální kmenové buňky cytologie MeSH
- pevnost v tlaku MeSH
- poréznost MeSH
- tkáňové podpůrné struktury chemie MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
In this work alpha tricalcium phosphate (α-TCP)/iron (Fe) composites were developed as a new family of biodegradable, load-bearing and cytocompatible materials. The composites with composition from pure ceramic to pure metallic samples were consolidated by pulsed electric current assisted sintering to minimise processing time and temperature while improving their mechanical performance. The mechanical strength of the composites was increased and controlled with the Fe content, passing from brittle to ductile failure. In particular, the addition of 25 vol% of Fe produced a ceramic matrix composite with elastic modulus much closer to cortical bone than that of titanium or biodegradable magnesium alloys and specific compressive strength above that of stainless steel, chromium-cobalt alloys and pure titanium, currently used in clinic for internal fracture fixation. All the composites studied exhibited higher degradation rate than their individual components, presenting values around 200 μm/year, but also their compressive strength did not show a significant reduction in the period required for bone fracture consolidation. Composites showed preferential degradation of α-TCP areas rather than β-TCP areas, suggesting that α-TCP can produce composites with higher degradation rate. The composites were cytocompatible both in indirect and direct contact with bone cells. Osteoblast-like cells attached and spread on the surface of the composites, presenting proliferation rate similar to cells on tissue culture-grade polystyrene and they showed alkaline phosphatase activity. Therefore, this new family of composites is a potential alternative to produce implants for temporal reduction of bone fractures. STATEMENT OF SIGNIFICANCE: Biodegradable alpha-tricalcium phosphate/iron (α-TCP/Fe) composites are promising candidates for the fabrication of temporal osteosynthesis devices. Similar to biodegradable metals, these composites can avoid implant removal after bone fracture healing, particularly in young patients. In this work, α-TCP/Fe composites are studied for the first time in a wide range of compositions, showing not only higher degradation rate in vitro than pure components, but also good cytocompatibility and mechanical properties controllable with the Fe content. Ceramic matrix composites show high specific strength and low elastic modulus, thus better fulfilling the requirements for bone fractures fixation. A significant advance over previous works on the topic is the use of pulsed electric current assisted sintering together with α-TCP, convenient to improve the mechanical performance and degradation rate, respectively.
- MeSH
- fosforečnany vápenaté farmakologie MeSH
- fraktury kostí farmakoterapie metabolismus patologie MeSH
- keramika farmakologie MeSH
- kostní náhrady farmakologie MeSH
- lidé MeSH
- modul pružnosti MeSH
- nádorové buněčné linie MeSH
- osteoblasty metabolismus patologie MeSH
- testování materiálů MeSH
- železo farmakologie MeSH
- Check Tag
- lidé MeSH
- Publikační typ
- časopisecké články MeSH
- práce podpořená grantem MeSH
