Tablets used for extended drug release commonly contain large amounts of drugs. The corresponding drug release mechanism thus has to be well-known and invariable under numerous conditions in order to prevent any uncontrolled drug release. Particularly important is the stability and invariability of the release mechanism in the presence of alcohol due to the possible occurrence of the dose dumping effect. The effect of 3D printing (3DP) coating on the drug release mechanism and the drug release rate was studied as a possible tool for the prevention of the alcohol-induced dose dumping effect. Three types of matrix tablets (hydrophilic, lipophilic, and hydrophilic-lipophilic) were prepared by the direct compression method and coated using 3DP. The commercial filament of polyvinyl alcohol (PVA) and the filament prepared from hypromellose by hot melt extrusion (HME) were used as coating materials. Both coating materials were characterized by SEM, DSC, Raman spectroscopy, and PXRD during particular stages of the processing/coating procedure. The dissolution behavior of the uncoated and coated tablets was studied in the strongly acidic (pH 1.2) and alcoholic (40% of ethanol) dissolution media. The dissolution tests in the alcoholic medium showed that the Affinisol coating was effective in preventing the dose dumping incidence. The dissolution tests in the acidic dissolution media showed that the Affinisol coating can also be useful for the delayed release of active substances.

• Klíčová slova
• 3D printing and coating, Affinisol, alcohol-induced dose dumping effect, dissolution testing, hot melt extrusion (HME), polyvinyl alcohol,
• Publikační typ
• časopisecké články MeSH

The aim of this work was to investigate and quantitatively evaluate the effect of presence of alcohol on in vitro release of ionizing and non-ionizing drug from hydrophilic, lipophilic and hydrophilic-lipophilic matrix tablets. The Food and Drug Administration (FDA) recommends in vitro dissolution testing of extended release formulations in ethanolic media up to 40% because of possible alcohol-induced dose dumping effect. This study is focused on comparison of the dissolution behavior of matrix tablets (based on hypromellose and/or glyceryl behenate as retarding agent) of the same composition containing different type of drug - ionizing tramadol hydrochloride (TH) and non-ionizing pentoxifylline (PTX). The dissolution tests were performed in acidic medium (pH 1.2) and in alcoholic medim (20%, 40% of ethanol) and the changes of tablets were observed also photographically. It was found that the alcohol resistence of the hydrophilic-lipophilic formulations with TH and the hydrophilic-lipophilic formulations with PTX containing a higher amount of hypromellose does not reflect the alcohol resistence of the formulations with pure hypromellose or glyceryl behenate. Both hydrophilic-lipophilic formulation with TH and more lipophilic formulation with PTX show significant alcohol dose dumping effect.

• Klíčová slova
• Alcohol, Dissolution, Glyceryl behenate, Hypromellose, Pentoxifylline, Tramadol hydrochloride,
• Publikační typ
• časopisecké články MeSH