Detail
Článek
Článek online
FT
Medvik - BMČ
  • Je něco špatně v tomto záznamu ?

The measurement and evaluation of basic ventilation modes and failure simulations on ventilation circuit

Vavřík David, Hájek Michal, Penhaker Marek

. 2008 ; 38 (2) : 191-194.

Jazyk angličtina Země Česko

Perzistentní odkaz   https://www.medvik.cz/link/bmc07531447

The subject of this project was the design and realization of laboratory measuring exercise on the mechanical ventilator. Pneumatic mechanical ventilator MARK8 from Bird Corporation Company was chosen. It is usable for three basic ventilation modes. Th ere are spontaneous, assist and controlled ventilation. We use Lilly type pneumotachometer for ventilation circuit evaluation from Hamilton company. It is usable for calm breathing. Diff erential pressure sensor Omega TX278-05D5V for diff erence pressure evaluation is being used. Also A/D card NI USB-9215 from National Instruments company as convertor to PC is being used. Measuring data are displayed in LabView. Th e Subject of Laboratory exercise is setting and measuring basic ventilation modes and failures simulation on the ventilation circuit.

The third Biomedical Engineering Conference of Young Biomedical Engineers and Researchers, July 8-10, 2008 Ostrava, The Czech Republic

000      
00000naa 2200000 a 4500
001      
bmc07531447
003      
CZ-PrNML
005      
20111210152053.0
008      
091020s2008 xr e eng||
009      
AR
040    __
$a ABA008 $b cze $c ABA008 $d ABA008 $e AACR2
041    0_
$a eng
044    __
$a xr
100    1_
$a Vavřík, David. $7 _AN038889
245    14
$a The measurement and evaluation of basic ventilation modes and failure simulations on ventilation circuit / $c Vavřík David, Hájek Michal, Penhaker Marek
314    __
$a VŠB – Technical University of Ostrava, Faculty of Electrical Engineering and Computer Science, Ostrava
500    __
$a The third Biomedical Engineering Conference of Young Biomedical Engineers and Researchers, July 8-10, 2008 Ostrava, The Czech Republic
520    9_
$a The subject of this project was the design and realization of laboratory measuring exercise on the mechanical ventilator. Pneumatic mechanical ventilator MARK8 from Bird Corporation Company was chosen. It is usable for three basic ventilation modes. Th ere are spontaneous, assist and controlled ventilation. We use Lilly type pneumotachometer for ventilation circuit evaluation from Hamilton company. It is usable for calm breathing. Diff erential pressure sensor Omega TX278-05D5V for diff erence pressure evaluation is being used. Also A/D card NI USB-9215 from National Instruments company as convertor to PC is being used. Measuring data are displayed in LabView. Th e Subject of Laboratory exercise is setting and measuring basic ventilation modes and failures simulation on the ventilation circuit.
650    _2
$a plicní ventilace $x fyziologie $7 D012123
650    _2
$a mechanické ventilátory $x využití $7 D012122
650    _2
$a monitorování fyziologických funkcí $x metody $x přístrojové vybavení $x využití $7 D008991
650    _2
$a počítačové zpracování signálu $x přístrojové vybavení $7 D012815
650    _2
$a počítačová simulace $x využití $7 D003198
650    _2
$a software $x trendy $7 D012984
650    _2
$a lidé $7 D006801
700    1_
$a Hájek, Michal $7 xx0089812
700    1_
$a Penhaker, Marek, $d 1972- $7 mzk2004246505
773    0_
$w MED00011033 $t Lékař a technika $g Roč. 38, č. 2 (2008), s. 191-194 $x 0301-5491
856    41
$u http://www.sbmili.cz/journal/LaT_2008_2.pdf $y plný text volně přístupný
910    __
$a ABA008 $b B 1367 $c 1071 b $y 9
990    __
$a 20091016134404 $b ABA008
991    __
$a 20091020164436 $b ABA008
999    __
$a ok $b bmc $g 690303 $s 552189
BAS    __
$a 3
BMC    __
$a 2008 $b 38 $c 2 $d 191-194 $i 0301-5491 $m Lékař a technika $x MED00011033
LZP    __
$a 2009-54/vtal

Najít záznam

Citační ukazatele

Pouze přihlášení uživatelé

Možnosti archivace

Nahrávání dat ...